New Arrivals

This listing is for a USED Alpha Checkweighers PW-12. This unit provides inline dynamic weighing of products using an integrated conveyor system and weighing platform, supporting weight verification and inspection in automated packaging and processing lines with 110 VAC supply and 24 VDC control interface.

This listing is for a USED Daikin E031283200400. This central station air handling system provides airflow movement and conditioning through a modular two-section cabinet design, incorporating blower and filtration sections for ducted HVAC integration in commercial and industrial environments.

This listing is for a NEW Carrier WeatherMaker 50TCQD14A2A6A0A0G0. This packaged rooftop heat pump provides heating and cooling using dual refrigeration circuits with R‑410A, integrating compressor, condenser, and air handling sections in a single enclosure for commercial HVAC applications.

This listing is for a USED Carrier 50VT-C36-60. This packaged rooftop unit provides conditioned air using a self-contained refrigeration system with R‑410A refrigerant, combining compressor, condenser, and air handling components within a single enclosure for commercial HVAC applications.

This listing is for a NEW Allen‑Bradley 855T-B10BC4. This unit provides combined visual and audible signaling through a strobe light and sounder module, operating on 120VAC for machine status indication, alarm signaling, and condition alerts in industrial automation systems.

This listing is for a NEW Allen‑Bradley 800T-A2B. This unit provides a panel-mounted pushbutton interface with a flush head actuator for operator input, supporting momentary control functions within industrial control panels and machine systems.

This listing is for a NEW Allen‑Bradley 700-HB32A1. This unit provides electromechanical switching using a DPDT contact configuration with a 120VAC coil, supporting control circuit isolation, signal switching, and load control in industrial automation and panel applications.

This listing is for a NEW Allen‑Bradley 800T-PT16G. This unit provides illuminated pilot light indication with push‑to‑test functionality, operating on 120V and designed for panel-mounted status indication in industrial control systems.

This listing is for a NEW Gems Sensors (IMO) 20173. This unit provides liquid level detection using a Load-Pak switch assembly for control of pumps, alarms, and fluid management systems, operating on 120/240VAC with SPDT switching for industrial and process applications.

This listing is for a NEW Allen‑Bradley 800T-J2KA7WA. This unit provides selector switch control with a maintained multi-position mechanism, allowing manual selection of operating states within industrial control panels and machine interfaces.

This listing is for a NEW Allen-Bradley 855T-B24BR4. This unit provides visual signaling through a strobe light module designed for stack light assemblies, operating on 24V AC/DC for industrial status indication and machine condition alerting in control systems.

This listing is for a NEW Allen‑Bradley 800T-FXJP16RA1. It provides an illuminated pushbutton interface with a mushroom head actuator for operator control and signaling within industrial panels and machine control stations.

This listing is for a NEW SICK WE2000-B4100. This unit provides photoelectric sensing for object detection using an optical emitter/receiver configuration, supporting non-contact presence detection and switching within automated machinery and industrial control systems.

This listing is for a USED CTM Labeling Systems 360a-1733-1503 from the 360 Series. This system applies pressure-sensitive labels to products in an automated packaging process using a pneumatic tamp/air-blow applicator integrated with conveyor handling and control hardware for inline labeling operations.

This listing is for a USED Norden Machinery Nordenmatic 702. This automated system performs tube filling and sealing using indexed handling, metered product dosing, and integrated closure stations within a guarded enclosure for packaging operations in industrial production environments.

This listing is for a USED Carrier WeatherMaker 50TCQD12A2A6A0A0G0. This packaged rooftop unit delivers conditioned air using a multi-compressor refrigeration system with integrated condenser and air handling sections, supporting commercial HVAC installations requiring a self-contained cooling solution.

This listing is for a USED Carrier WeatherMaker 50FCQM07A2A6A0A0A0. This packaged rooftop unit delivers conditioned airflow using an integrated refrigeration circuit with outdoor condenser fan and internal air handling section, supporting commercial HVAC installations requiring compact, self-contained systems.

This listing is for a USED AAON RN-020-3-0-E60A-000. This packaged rooftop unit delivers air conditioning using a dual-compressor refrigeration system with R‑410A, integrating condenser and air handling sections within a single cabinet for commercial climate control applications.

This listing is for a USED Schechtl MSB150 BV. This powered shear executes straight-line cutting of sheet metal using a motor-driven guillotine mechanism paired with a backgauge positioning system and operator control interface, supporting repeatable fabrication and panel processing operations.

This listing is for a USED ACER E VS-3VK E-MILL. This machine performs milling, drilling, and machining operations using a vertical spindle with a manual knee-and-table configuration. Key capabilities include a 2 horsepower spindle drive, 208–220/440V three phase electrical operation, variable speed head, installed power feed, and Newall digital readout system for enhanced positioning accuracy.

This listing is for a USED CINCINNATI 2437 Toolmaster vertical milling machine. This machine performs milling, drilling, and machining operations using a vertical spindle and manually controlled knee-and-table assembly. Key capabilities include a 2 horsepower spindle drive, 208–220/440V three phase electrical operation, and reinforced cast construction designed for toolroom and production machining.

This listing is for a USED DOALL DBW-12. This vertical band saw cuts metal and other materials using a continuous blade for contour and straight cutting operations. Key capabilities include a 12-inch class throat, variable speed selection via the front contour dial, and 200V three-phase operation with heavy-duty industrial construction.

This listing is for a USED CM LODESTAR Model C electric chain hoist. This unit lifts and lowers loads using a motor-driven chain system and overhead mounting, supporting a 1/4 ton (500 lb) lifting capacity. The hoist operates on 440–480V three-phase power, includes a pendant control, and is configured with a hook-mounted lifting assembly.

This listing is for a USED MILLER SHOPMASTER CC/CV-AC/DC. This welder delivers both constant current and constant voltage output for multiple welding processes, supporting AC and DC operation. The unit is equipped with front-panel controls, analog meters, and heavy-duty transformer design for shop and industrial welding applications.

This listing is for a USED DAIKIN CAH012GDGM (Part No. E031283200100). This unit circulates and filters air in HVAC systems using an internal blower assembly and multi-stage filtration section. Key capabilities include a 10 horsepower blower drive, 460V three phase electrical operation, AHRI-certified central station air handling construction, and an estimated airflow in the 4,000 to 6,000 CFM range suitable for medium-scale HVAC applications.

This listing is for a NEW SCHNEIDER ELECTRIC 9065SFB20C. This unit provides electronic overload protection for motor circuits, monitoring current and interrupting operation during overload conditions. It operates within a 1.5 to 4.5 amp adjustable range and is part of the MotorLogic solid state overload relay series used in industrial control systems.

This listing is for a USED hydraulic material handler. The unit uses a foot-operated hydraulic pump to raise and position loads, with dual fork arms and a backplate support integrated into a compact steel frame. It is suited for handling palletized materials or components in shop and warehouse environments without requiring powered equipment.

This listing is for a NEW TELEMECANIQUE LC1D09REQ3826G1 motor starter assembly. The unit combines a TeSys D contactor with an attached thermal overload relay for switching and protection of motor circuits. It supports 24V DC coil control and a 9A three-pole configuration, suitable for industrial control panels and machinery.

This listing is for a NEW IFM ELECTRONIC OPU203. This unit is designed for optical detection using a fiber optic sensing system, providing precise object detection in automation applications. It operates on 10–30V DC and supports configurable switching outputs, compact installation, and integration with fiber optic sensor cables for industrial sensing environments.

This listing is for a USED DONGGUAN SENBAO SB-1800. This unit removes particulate contamination from personnel or materials using a high-velocity air shower system before entry into controlled environments. The system supports 3-phase 220V operation, includes HEPA filtration, and features stainless steel construction with programmable nozzle timing and multi-jet airflow design.

This listing is for a USED Norden NM 702 Automatic Tube Filling Machine. It is designed for high‑speed, precision filling and sealing of plastic, laminate, and aluminum tubes. This unit is categorized as an automatic tube filler and includes capabilities commonly associated with the Nordenmatic 702 platform such as robust stainless construction, accurate filling control, and consistent end‑sealing performance. The machine is widely used in cosmetic, pharmaceutical, and personal‑care product manufacturing.

This listing is for a NEW SCHNEIDER ELECTRIC XVB L38. This unit provides visual signaling using a steady yellow beacon light for industrial indication and alert applications. It operates across a wide voltage range of 12–230V and is designed as part of the Harmony XVB modular signaling system with IP65 protection for use in shop floor and automation environments.

This listing is for a NEW BANNER Q60BB6AFV1000Q. This unit detects objects using photoelectric sensing technology and provides output signals for automation control systems. The sensor operates on 10–30V DC, includes multiple configurable outputs, and features a compact housing with integrated push-button and LED interface for setup and diagnostics.

This listing is for a USED CP TOOLS BIRMINGHAM H-0435. This hydraulic shear is built for cutting sheet metal using a powered blade system, supporting fabrication and production environments. The machine features a 7.5 HP motor, hydraulic cutting action, and a control panel with programmable positioning and manual controls for operation.

This listing is for a NEW ALLEN-BRADLEY 700-PT400A1. This unit introduces a controlled time delay into electrical circuits, allowing delayed switching of connected loads after power is applied. The relay operates on 115–120V AC at 50/60 Hz and is built in a plug-in format designed for use with compatible relay bases in industrial control panels.

This listing is for a USED Estrella AG 34129 glass‑lined reactor/autoclave. It is designed for pressure and temperature‑controlled processing of materials in industrial and laboratory environments. This unit features a glass‑lined interior, a 12,000‑volt enamel/glass test rating, and a 2.9‑gallon jacket capacity. The reactor is suitable for processing chemicals, coatings, resins, and other materials requiring a corrosion‑resistant pressure vessel.

This listing is for a NEW ALLEN-BRADLEY 1788-DNB0A. This unit provides DeviceNet communication capability through a compact board-level interface designed for embedded or panel-integrated applications. The module supports 5V and 24V DC power inputs, terminal connections, and DIP switch configuration for node addressing within industrial DeviceNet networks.

Lindberg/Blue M HTF55347C Rotary Tube Furnace System, 1200 °C, 5.1 kW, w/ CC58434PBC Controls
Lindberg/Blue M laboratory rotary tube furnace system designed for high-temperature calcination, oxidation, and thermal processing of powders and granular materials. Unit includes HTF55347C tube furnace, CC58434PBC control console, drive assembly, and support frame. Maximum temperature rated to 1200 °C. Operates on 240 V, single-phase power at approximately 5.1 kW.

This listing is for a NEW SIEMENS 6EP1333-2BA20 SITOP PSU100S. This unit converts AC input power into regulated 24V DC output for industrial control systems, delivering 5A output capacity. The power supply supports a wide input range of 120/230V AC and is designed for DIN rail installation within automation panels and machine control applications.

This listing is for a NEW ALLEN-BRADLEY 1769-PB2 Series A. This unit supplies backplane power to Compact I/O modules in CompactLogix systems, supporting 24V DC input with regulated 5V and 24V outputs. The module is designed for DIN rail mounting and is used to distribute power across local I/O banks in industrial control environments.

This listing is for a USED STREET ZX34-3SNM4KLU wire rope hoist. Built for overhead lifting in industrial crane systems, this unit uses an electric motor-driven drum and trolley assembly to handle loads up to 5000 kg. The system operates on 460V three-phase power and includes a beam-mounted travel configuration with integrated motor, gearbox, and hoist structure.

This listing is for a USED FANUC R‑2000iC/165F FoundryPRO robot arm. Built for high-payload automation, this unit handles up to 165 kg and is configured with FoundryPRO protection for operation in harsh environments such as casting and high-temperature processes. The design incorporates a 6-axis articulated arm, extended reach capability, and integrated base connections for industrial control and pneumatic routing.

This listing is for a USED FANUC R-2000iB/165F FoundryPRO robot arm. Designed for high-payload industrial automation, this robot handles up to 165 kg and is built for harsh environments such as foundry and casting operations. The unit features long reach capability, multi-axis articulation, and a FoundryPRO protective design for operation in elevated temperature and debris-heavy conditions.

This listing is for a USED KALAMAZOO INDUSTRIES belt grinder & sander. Built for heavy-duty material removal and surface finishing, this floor-standing unit uses a vertical belt configuration with integrated work platform and electrical controls. The setup includes a transformer-fed power system and industrial cabinet base, supporting grinding and sanding operations in fabrication and maintenance environments.

This listing is for a USED BLACK & DECKER 6818. Built as a heavy-duty pedestal-mounted grinder, this unit is suited for sharpening, grinding, and material finishing tasks using dual 8-inch abrasive wheels. The grinder features a 1 horsepower motor, 120V single-phase operation, and 3580 RPM speed, providing reliable performance for shop and maintenance applications.

This listing is for a USED SEARS CRAFTSMAN 8-inch bench grinder. Built for grinding, sharpening, and material finishing, this unit uses dual abrasive wheels driven by a 1 horsepower motor. The setup includes a pedestal-mounted configuration, integrated work rests, and a mounted task light, supporting shop use for maintenance and fabrication work.

This listing is for a USED JET JSG-6DC. Built as a combination sanding and grinding unit, this machine uses a 1-1/2 HP motor to drive both belt and disc operations for material removal and finishing. The setup supports dual-voltage 115/230V single-phase power and features a compact bench-mounted configuration for use in fabrication and maintenance environments.

This listing is for a USED JET JSG-6. Designed as a combination sanding and grinding machine, this unit handles surface finishing, shaping, and material removal using both a horizontal belt and vertical disc setup. The configuration includes a 1/2 HP motor, dual-function sanding/grinding capability, and selectable 115/230V operation for shop flexibility.

This listing is for a NEW HONEYWELL C7027A 1064. Built for flame monitoring in combustion systems, this detector uses ultraviolet sensing to confirm flame presence while working with a compatible amplifier module. The setup includes a sensor head with 24 ft leads, threaded mounting hardware, and a matching amplifier component for burner safety and control applications.

This listing is for a NEW MCGILL MCF 19 S. Designed for cam and track-following applications, this bearing uses a stud-mounted configuration with a sealed construction to support smooth rolling contact and reduced contamination exposure. The unit is part of the MCF series and is suited for compact mechanical systems requiring consistent motion guidance and load support.

This listing is for a USED ALLEN-BRADLEY 1792D-16BVT0D. Built for distributed I/O applications, this ArmorBlock module handles digital input and output signals directly at the machine level while communicating over DeviceNet. The unit supports 16 I/O points, 24V DC operation, and sealed field wiring connections for use in industrial automation environments.

This listing is for a NEW MCGILL MCF 16 S. This cam follower is built for compact mechanical systems where rolling contact is required against cams or track surfaces. The design features a stud-type configuration with sealed construction and internal lubrication, supporting consistent motion control and load carrying performance in industrial applications.

This listing is for a NEW MCGILL CF 1-1/2 SB. This cam follower is built for stud-mounted applications where rolling contact is required against cams or track surfaces. The design incorporates a 1-1/2 inch class roller size along with sealed construction and internal lubrication features to support consistent operation in mechanical motion systems.

This listing is for a NEW ALLEN-BRADLEY 500F-BOD930 Series B. Built for switching AC motor and power circuits, this contactor supports 115–120V coil operation at 60 Hz and is configured with three normally open main poles plus one normally open auxiliary contact, making it suitable for control panels and motor starter assemblies.

This listing is for a NEW SIEMENS 6ES7 193-4CB00-0AA0. Designed for use with Siemens ET 200S distributed I/O systems, this terminal module provides the wiring interface between field signals and I/O electronics. The unit supports modular installation, front-connected terminals, and DIN rail mounting within industrial automation control panels.

This listing is for a NEW MCGILL CFE 3/4 SB. This unit provides stud-mounted cam follower support using a sealed bearing design, allowing smooth rolling contact against tracks or cams in mechanical systems. The configuration includes a 3/4 inch class roller size, built-in sealing, and McGill Lubri-Disc lubrication for reliable operation in motion control and conveyor-type applications.

This listing is for a NEW EUCHNER NZ1RL-3131-M. Built for machine safety and access control, this switch is used to monitor guard doors and machinery enclosures, ensuring equipment cannot operate when safety boundaries are open. The unit supports mechanical actuation and safety-rated switching within industrial automation and protection systems.

This listing is for a NEW GREENHECK DFD-210-96X68. Built for fire protection within HVAC duct systems, this damper closes under elevated temperature conditions to help prevent the spread of fire through air distribution openings. The assembly features a 96 x 68 inch opening, a 1-1/2 hour fire resistance rating, and a multi-blade steel construction designed for large duct installations.

This listing is for a NEW MCGILL BCF 1/2 SB. This unit provides stud-mounted cam follower support using a sealed bearing design for controlled rolling contact in mechanical systems. Frequently used in conveyor tracking, cam-driven assemblies, and automated machinery, it supports consistent load handling with a compact 1/2 inch configuration and integrated sealing for extended service life.

This listing is for a USED HYPERTHERM HT2000. Built for high-power industrial plasma cutting, this system delivers constant current DC output for mechanized and CNC cutting applications. The unit supports up to 200 amp output and is designed to operate with an external water-cooled torch system, along with integrated control and interface connections for automated cutting environments.

This listing is for a USED ELECTRO ARC ARC-ER CONV. Built for removing broken taps, drills, and fasteners, this machine uses an electrical erosion process with a controlled electrode and flushing system. The setup includes an ARC-ER current monitoring head, adjustable feed mechanics, and single-phase 220V operation housed in a self-contained cabinet.

This listing is for a USED Eaton V48M28T7516. This unit is designed to step down electrical voltage from 480V systems to 208Y/120V for distribution to equipment and facility circuits. It is commonly applied in industrial and commercial electrical systems requiring three‑phase power distribution.

This listing is for a USED HYPERTHERM HT2000. This unit provides high-power plasma cutting output for industrial metal cutting applications using electrically generated plasma arc technology. It is commonly applied in automated CNC cutting systems and fabrication environments requiring high current plasma output, multi-connector interface capability, and integrated cooling system for continuous-duty operation.

This listing is for a NEW ALLEN-BRADLEY 1756-IF8 Series A. This unit provides analog input signal processing by receiving current and voltage signals from field devices and transmitting them to a ControlLogix system. It is commonly applied in industrial automation systems requiring 8-channel analog input capability, support for 0–10 VDC and 4–20 mA signals, and integration within Allen-Bradley ControlLogix platforms.

This listing is for a USED VICKERS PVH98QPC-RM1S10. This unit provides hydraulic fluid flow by converting mechanical rotation into pressurized hydraulic output for industrial systems. It is commonly applied in heavy-duty hydraulic applications requiring high-flow vane pump performance within machinery, presses, and industrial equipment.

This listing is for a USED VICKERS PVE35QR1-22C21V17-21. This unit provides hydraulic fluid flow by converting mechanical rotation into pressurized hydraulic output for system operation. It is commonly applied in industrial hydraulic systems requiring vane pump design, flange mounting, and pressure-driven fluid movement for machinery and process equipment.

This listing is for a USED KAESER CSD 75 T. This unit provides compressed air generation using a rotary screw compressor package with integrated controls and cooling system. It is commonly applied in industrial facilities requiring continuous-duty compressed air supply with 75 horsepower output, 345 CFM capacity, 125 PSIG pressure, and Sigma Control 2 interface for monitoring and operation.

This listing is for a NEW ALLEN-BRADLEY 700-PT400A1. This unit provides time delay control by introducing an adjustable timing function into electrical circuits, enabling delayed switching of connected loads. It is commonly applied in industrial control systems requiring 120V AC supply, solid-state timing functions, and plug-in relay configuration for sequencing and timing operations.

This listing is for a NEW ALLEN-BRADLEY 1794-IA16 Series A. This unit provides discrete AC input capability by receiving 120V AC field signals and transmitting them to a FLEX I/O control system. It is commonly applied in industrial automation environments requiring 16-channel AC input monitoring, modular distributed I/O architecture, and integration with Allen-Bradley FLEX I/O platforms.

This listing is for a NEW SIEMENS SIMATIC ET 200SP digital input module (6ES7131-6BF01-0BA0). This unit provides discrete signal acquisition by receiving 24V DC input signals from field devices and transmitting them to a PLC or remote I/O system. It is commonly applied in industrial automation systems requiring compact distributed I/O, 8-channel digital input capability, and integration within Siemens ET 200SP stations.

This listing is for a USED CM MG251615RH2. This unit provides electric lifting and lowering of loads using a motor-driven chain hoist mechanism in overhead material handling systems. It is commonly applied in industrial facilities and manufacturing environments requiring 1/4 ton capacity, 460V three-phase operation, and 16 feet per minute lifting speed for controlled load handling.

This listing is for a USED HARRINGTON ES3B-958. This unit provides electric lifting capability using a chain-powered hoist mechanism for vertical material handling. It is commonly applied in industrial maintenance, assembly operations, and light-duty lifting environments requiring 1/4 ton capacity, electric operation, and controlled lifting speed of 31.5 feet per minute.

This listing is for a USED DIAMOND PRODUCTS CORE CUT walk-behind floor grinder. This unit provides surface preparation and material removal through rotating contact discs mounted beneath the chassis. It is commonly applied in concrete surface grinding, coating removal, and floor preparation operations requiring a 3 HP electric motor and push-type walk-behind configuration.

This listing is for a USED MILLER DELTAWELD 450. This unit provides constant potential DC welding output for MIG and flux-cored welding applications. It is commonly applied in industrial fabrication and manufacturing environments requiring 450 amp output capacity, 100 percent duty cycle, and adjustable 14 to 38 V DC welding range for continuous heavy-duty welding operations.

This listing is for a NEW NTN 6203LLBC3/EM. This unit provides radial rotational support using a deep groove ball bearing design for reduced friction and consistent performance in rotating assemblies. It is commonly applied in electric motors, pumps, and industrial machinery requiring double sealing, C3 internal clearance, and standard 17 mm bore configuration.

This listing is for a USED SQUARE D 9007C054B2. This unit provides mechanical position sensing by detecting motion or contact and actuating internal electrical contacts within control circuits. It is commonly applied in industrial automation systems and machinery requiring limit position detection using a roller plunger actuator with 600VAC rating.

This listing is for a NEW ALLEN-BRADLEY 1336-MOD-L3. This unit provides TTL-level interface capability for integration with Allen-Bradley 1336 series drives, enabling communication and signal interfacing between control systems and drive hardware. It is commonly applied in variable frequency drive systems requiring 115V TTL interface functionality for industrial automation and motor control environments.

This listing is for a NEW ALLEN-BRADLEY 1794-TB3 Series A. This unit provides a field wiring interface and mounting base for FLEX I/O modules, enabling structured connection of input and output signals within distributed control systems. It is commonly applied in industrial automation environments requiring 16-point terminal capacity, DIN rail mounting, and integration with Allen-Bradley FLEX I/O modules.

This listing is for a NEW ALLEN-BRADLEY 836T-T253JX15/A. This unit provides pressure-based switching control by monitoring system pressure and actuating electrical contacts at defined setpoints. It is commonly applied in industrial fluid systems, compressors, and process control applications requiring adjustable pressure control within a 30–150 PSI range and enclosed industrial housing.

This listing is for a NEW ALLEN-BRADLEY 1794-TB3 Series A. This unit provides a field wiring interface and mounting base for FLEX I/O modules, enabling structured connection of input and output signals within distributed control systems. It is commonly applied in industrial automation environments requiring 16-point terminal capacity, DIN rail mounting, and integration with Allen-Bradley FLEX I/O modules.

This listing is for a NEW ALLEN-BRADLEY 836T-T25BJX81X9. This unit provides pressure-based switching control by monitoring system pressure and actuating electrical contacts at a defined setpoint range. It is commonly applied in industrial process control, fluid systems, and machinery requiring adjustable pressure control from 30–150 PSI within a NEMA 4 rated enclosure.

This listing is for a NEW TIMKEN LM11910. This unit provides tapered roller bearing support as the cone component for handling combined radial and axial loads in rotating assemblies. It is commonly applied in automotive hubs, trailers, and light industrial machinery requiring a precision bearing cone compatible with matched cup LM11949.

This listing is for a NEW TIMKEN TRC-2840. This unit provides axial load support using a needle roller thrust bearing assembly for compact mechanical systems. It is commonly applied in transmissions, gear assemblies, and industrial machinery requiring thrust load handling with matched race and roller components in a compact form factor.

This listing is for a USED ALLEN-BRADLEY 1756-L61S/B. This unit provides safety-rated programmable control within a ControlLogix architecture by executing standard and safety logic in industrial automation systems. It is commonly applied in machine safety systems, process control applications, and integrated safety environments requiring GuardLogix functionality with CompactFlash memory and battery-backed data retention.

This listing is for a NEW MCGILL CF 2-1/2 SB. This unit provides stud-type cam follower support for rolling contact applications in mechanical systems. It is commonly applied in conveyor tracking, cam-driven equipment, and industrial machinery requiring a 2-1/2 inch roller diameter with sealed bearing construction for contamination protection.

This listing is for a NEW SCHNEIDER ELECTRIC 9001K50. This unit provides manual selector switch operation for industrial control circuits by enabling operator input through a maintained position switching mechanism. It is commonly applied in control panels and machine interfaces requiring heavy-duty selector operation within Harmony 9001K series systems.

This listing is for a NEW TURCK SDNB-40A-0007. This unit provides stand-alone identification and data storage capability within industrial automation systems. It is commonly applied in identification, tracking, and decentralized data management applications requiring solid-state memory, non-volatile data retention, and M12 connection interface.

This listing is for a NEW SKF GEZ 100 ES-2RS. This unit provides spherical plain bearing support for radial and axial loads through a self-aligning inner ring design. It is commonly applied in heavy-duty industrial equipment and mechanical linkages requiring 100 mm bore size, steel-on-steel contact surfaces, and double-lip sealing for contamination protection.

This listing is for a NEW BANNER S18AW3LQ. This unit provides photoelectric object detection using optical sensing for non-contact presence monitoring in automation systems. It is commonly applied in material handling, packaging, and industrial automation applications requiring compact sensor design, visible light sensing, and 10–30 VDC operation with solid-state output.

This listing is for a NEW CONSOLIDATED E-12. This unit provides precision rotational support using a ball bearing configuration for reduced friction and consistent motion in mechanical assemblies. It is commonly applied in light-duty industrial equipment and general rotating systems requiring compact bearing elements with standardized dimensions.

This listing is for a NEW IFM ELECTRONIC SI8503. This unit provides flow monitoring for liquid media by detecting flow conditions and transmitting switching output signals in industrial systems. It is commonly applied in process automation and machine cooling circuits requiring adjustable flow sensing with 10–30 VDC operation and solid-state switching output.

This listing is for a NEW CERTOLUX CRV96-LED840K200LUNV-P69. This unit provides high-output LED lighting in a sealed vapor-tight configuration for industrial and commercial environments. It is commonly applied in manufacturing facilities, parking structures, and washdown areas requiring 156W LED output, 120–277V operation, and enclosed IP-rated fixture protection.

This listing is for a NEW TELEMECANIQUE 055187 (VZ2). This unit provides main contact switching capability for compatible contactor systems, enabling power circuit connection and disconnection in industrial control applications. It is commonly applied in motor control assemblies and industrial automation systems requiring up to 40A contact handling within Telemecanique contactor configurations.

This listing is for a USED ADVANTAGE ENGINEERING TIP-100W Titan. This unit is designed to provide industrial water chilling by removing heat from circulating process water and supplying cooled fluid to connected equipment. It is commonly applied in plastics processing and industrial cooling systems requiring large-capacity operation with 460V 3-phase power, R407C refrigerant, and integrated multi-compressor configuration.

This listing is for a NEW SCHNEIDER ELECTRIC LRD21. This unit is designed to provide thermal overload protection for motors by monitoring current and interrupting the circuit during overload conditions. It is commonly applied in motor control systems using TeSys contactors where adjustable protection in the 12–18 amp range and direct contactor mounting are required.

This listing is for a NEW TORRINGTON NTA-2840. This unit is designed to provide axial load support using a needle roller thrust bearing configuration for applications requiring compact height and high load-carrying capability. It is commonly applied in transmissions, gear assemblies, and industrial machinery requiring axial thrust control with compact bearing design.