Explore iGAM’s Industrial Electronics

This listing is for a Used EMERSON EB-205 Epsilon Digital Servo Drive.

The EB-205 is part of Emerson’s Epsilon series of fully digital brushless servo drives. It is designed to deliver high-performance motion control in a compact, standalone package. Ideal for applications requiring precise speed, torque, and position control, the EB-205 supports multiple operating modes and integrates easily into a variety of automation systems.

See photos for details.

Part No: EB-205
Type: Digital Servo Drive
Condition: Used
Input Voltage: 95–132 VAC, 50/60 Hz
Output Current: Up to 5 A Continuous
Control Modes: Position, Velocity, Torque
Integrated Indexer and Motion Sequencing
RS-232/RS-485 Serial Communication
Digital and Analog I/O
Compact Standalone Design
Compatible with Epsilon EB Series Motors

Please message us with any questions.

This listing is for a Used PARKER SX6-DRIVE.

The SX6-DRIVE is a microstepping servo drive and indexer from Parker Compumotor, designed for precision motion control applications. It delivers smooth, high-resolution motion and is compatible with SX57 and SX83 drive/motor packages. Ideal for automation systems requiring accurate positioning and speed control.

See photos for details.

Part No: SX6-DRIVE
Type: Microstep Servo Drive / Indexer
Condition: Used
Input Voltage: 95–132 VAC, 50/60 Hz
Output Current: 6 Amps
Integrated Microstepping Indexer
Compatible with SX57 and SX83 Motor Packages
User-Selectable Motor Resolutions (up to 50,800 steps/rev)
Three-State Current Control for Reduced Motor Heating
RS-232C Programmable Interface
Optically Isolated I/O
Compact, Enclosed Design

Please message us with any questions.

This listing is for a Used ANTUNES CONTROL 8910000010 EDD.

The EDD (Electronic Demand Display) is a digital interface module used in commercial kitchen or industrial control systems. It provides real-time display and monitoring of system demand or status, often integrated with Antunes control systems for enhanced operational visibility and diagnostics.

See photos for details.

Part No: 8910000010
Type: Electronic Demand Display (EDD)
Condition: Used
Digital Display Interface
Compatible with Antunes Control Systems
Panel Mountable
LED Status Indicators
Low Voltage Operation

Please message us with any questions.

This listing is for a USED Cleveland Controls NS2-000-05 Air Sensing Switch.

Adjustable airflow pressure switch designed for HVAC and industrial applications. Offers high accuracy and reliability with a narrow switching differential. Includes mounting hardware and color-coded springs for field adjustment.

See photos for details.

Part No: NS2-000-05
Type: Airflow Pressure Sensing Switch
Condition: USED
Adjustable Set Point: 0.05″ to 10.0″ WC
SPDT Contact Form
Includes Mounting Bracket, Springs, Orifices
Electrical Rating: 1/10 HP @ 120–277V AC
Please message us with any questions.

KEYENCE CA-U3 Power Supply, used but well-maintained. Ideal for industrial applications. Compact design, reliable performance. Elevate your equipment with this essential component today.

EUROTHERM temperature control model US36984-003-4, used condition, available for sale. Ideal for managing and regulating temperature in various systems, ensuring optimal performance.

MAGNESCALE MG42-4 MG40 SERIES MEASURING SYSTEM Control unit, brand new and in original packaging. This top-notch equipment from MAGNESCALE ensures cutting-edge machine control for your production line needs. Don’t miss out on this brand-new item.

Mitsubishi A9GT-QBUS2SU Q Bus Interface Unit, in new condition. Enhance your system with this top-quality interface unit from Mitsubishi. Ideal for optimizing connectivity in your operations.

MITSUBISHI A6TBXY36 PLCs/Machine Control unit available now. Brand new condition, ready to optimize your operations with reliable machine control. Secure this essential piece of equipment today for enhanced performance and efficiency.

MITSUBISHI MDS-C1-V2-7045 servo drives and amplifiers, brand new. Ideal for precision applications, ensuring efficient and reliable performance. Enhance your system with top-tier technology from a trusted manufacturer.

This listing is for a USED MOXA EDS-208 Ethernet Switch.

8-port unmanaged Ethernet switch designed for industrial networking applications. Supports 10/100 Mbps speeds with auto-sensing and broadcast storm protection. DIN-rail mountable with rugged IP30-rated housing.

See photos for details.

Part No: EDS-208
Type: Unmanaged Ethernet Switch
Condition: USED
8x 10/100BaseT(X) RJ45 Ports
DIN-Rail Mountable
Operating Temp: -10°C to 60°C
IP30 Metal Housing
Please message us with any questions.

This listing is for a USED KUKA KPC ED05 Robot Controller (133594).

Industrial PC-based controller used in KUKA KRC2ed05 robotic systems. Provides real-time motion control and system management for KUKA robots. Includes multiple I/O and communication ports for integration with automation environments.

See photos for details.

Part No: 133594
Type: Industrial Robot Controller
Condition: USED
Input Voltage: 24V DC
Multiple I/O Ports (Ethernet, USB, DVI, Serial)
Compatible with KUKA KRC2ed05
Please message us with any questions.

This listing is for a USED MGV PH1013-2840.

Industrial-grade DC power supply designed for use in KUKA robotic systems and other automation environments. Provides a stable 27.3V DC output for powering control systems and components.

See photos for details.

Part No: PH1013-2840
Type: Industrial DC Power Supply
Condition: USED
Output Voltage: 27.3 VDC
Output Current: Approx. 10 A
Input Voltage: 100–240 VAC (typical)
Please message us with any questions.

This listing is for a USED KUKA 27V NT KRC2.

Power supply unit designed for use with KUKA KRC2 robotic controllers. Provides stable 27.3V DC output for powering internal systems and peripherals.

See photos for details.

Part No: 27V NT KRC2
Type: Power Supply Unit
Condition: USED
Input Voltage: 400–580 VAC
Output Voltage: 27.3 VDC
Output Current: Up to 40 A
Please message us with any questions.

This listing is for a NEW Allen-Bradley 1734-OB8 POINT I/O Digital Output Module.

This 8-point 24V DC sourcing (PNP) output module is designed for use in distributed I/O systems using the POINT I/O platform. Features include diagnostic status LEDs, compact DIN rail mounting, and compatibility with all POINT I/O chassis and terminal bases.

Part No: 1734-OB8
Type: Digital Output Module (PNP)
Condition: NEW
• 8 digital outputs (sourcing)
• 24V DC operation
• 1.0 A per channel, 3.0 A per module
• POINTBus communication
• DIN rail mountable (terminal base required)

Terminal base not included. Factory new. Please contact us with any questions.

This listing is for a NEW Allen-Bradley 1732ES-IB8XOBV4 ArmorBlock Guard I/O Safety I/O Module.

This IP67-rated EtherNet/IP safety block features 8 safety inputs and 4 safety outputs, ideal for distributed safety systems on machine frames. Compatible with GuardLogix and other SIL3/PLe safety-rated control systems.

Part No: 1732ES-IB8XOBV4
Type: Safety I/O Module – EtherNet/IP
Condition: NEW
• 8 inputs / 4 outputs
• 24V DC operation
• Safety-rated to SIL3 / Cat. 4 / PLe
• PNP outputs, short-circuit protected
• EtherNet/IP communication
• IP67-rated for on-machine use

Factory sealed unless otherwise stated. Please contact us with any questions.

This listing is for a LOT OF 6 USED Turck BI20R-Q14-AP6X2-H1141 Inductive Proximity Sensors.

These 20 mm sensing distance rectangular-style sensors feature a 2-meter cable and are ideal for position sensing in automation and machine control applications. PNP normally open output, IP67-rated for harsh environments.

Part No: BI20R-Q14-AP6X2-H1141
Type: Inductive Proximity Sensor
Condition: USED (Lot of 6)
• 20 mm sensing range
• PNP output, Normally Open
• 10–30V DC operating voltage
• IP67 protection
• 2 m cable (X2)
• Rectangular plastic housing (Q14 style)

All 6 sensors included. See photos for condition. Cables may be trimmed or show signs of wear. Message us for details!

This listing is for a NEW Allen-Bradley 1756-OB16D ControlLogix Digital Output Module.

The 1756-OB16D is a 16-point sourcing digital output module with built-in diagnostic capabilities. It is designed for use in ControlLogix chassis and offers short circuit and open load detection for each point.

Part No: 1756-OB16D
Type: Digital Output Module (Sourcing, Diagnostic)
Condition: NEW
• 16 sourcing outputs
• 24V DC operation (10–31.2V DC range)
• 1.0 A per point, 4 A max per module
• Built-in diagnostics: open load, short circuit
• Compatible with 1756-TBCH/TBS terminal blocks (not included)

Please message us with any questions!

This listing is for a NEW Allen-Bradley 1756-TBCH/A Removable Terminal Block.

The 1756-TBCH/A is a 36-position cage clamp RTB used with ControlLogix analog and digital I/O modules. It mounts horizontally and is essential for wiring I/O signals in your ControlLogix chassis.

Part No: 1756-TBCH/A
Type: 36-Point Cage Clamp RTB
Condition: NEW
• Horizontal mount
• 36-pin removable terminal block
• Series A
• For use with Allen-Bradley ControlLogix I/O modules

Factory seal may be intact — see photos. Message with any questions!

This listing is for a NEW Allen-Bradley 1756-TBCH/A Removable Terminal Block.

The 1756-TBCH/A is a 36-position cage clamp RTB used with ControlLogix analog and digital I/O modules. It mounts horizontally and is essential for wiring I/O signals in your ControlLogix chassis.

Part No: 1756-TBCH/A
Type: 36-Point Cage Clamp RTB
Condition: NEW
• Horizontal mount
• 36-pin removable terminal block
• Series A
• For use with Allen-Bradley ControlLogix I/O modules

Factory seal may be intact — see photos. Message with any questions!

The Perceptron 495-0191 Frame Grabber is a high-speed image acquisition module designed for industrial machine vision applications, including automated inspection, robotic guidance, and quality control systems. This repaired unit has been restored to full functionality, ensuring accurate image capture and real-time processing for precision measurement and defect detection.

The Perceptron VME Grapher (PN: 495-0092) is a high-performance graphical processing module, designed for machine vision, industrial automation, and metrology applications. This repaired unit has been restored to full operational condition, ensuring reliable image rendering, data visualization, and real-time processing in automated quality control and robotic guidance systems.

The Perceptron 495-0117-03 Frame Grabber is a high-performance image acquisition module designed for machine vision and industrial automation applications. This repaired unit has been restored to full working condition, ensuring reliable image capture and processing in automated inspection, quality control, and robotic guidance systems.

This listing is for a USED EXAIR 7960 Gen4 Static Neutralizing Power Supply.

High-voltage power supply designed for use with EXAIR ionizing bars and air knives. Features dual voltage input, electromagnetic shielding, and two output ports for simultaneous device operation.

See photos for details.

Part No: 7960
Type: Static Neutralizing Power Supply
Condition: USED
Output Voltage: 5,000 VAC
Input Voltage: 115/230 VAC, 50/60 Hz
2 Output Ports
6 ft Power Cord
UL, CE, and RoHS Compliant
Please message us with any questions.

This listing is for a USED GE Fanuc IC693ALG221K Analog Input Module.

4-channel analog input module for the GE Series 90-30 PLC systems. Supports ±10V or 0–20mA inputs. Ideal for integrating analog sensors into legacy industrial automation systems.

Part No: IC693ALG221K
Type: Analog Input Module
Condition: USED
4 Analog Inputs
Input Range: ±10V or 0–20mA
12-bit Resolution
Series 90-30 PLC Compatible

Please confirm compatibility with your control system.

This listing is for a NEW Precision Power PC-01100-C PLC Module.

Industrial control module used in OEM automation systems. Appears unused and is in clean, original condition. Terminal blocks for input/output and board connections.

Part No: PC-01100-C
Type: PLC Control Module
Condition: NEW
Industrial automation I/O module
Clean, unused OEM module

Please message us with any compatibility questions.

This listing is for a USED ABB NAMU‑01C Auxiliary Measuring Unit (AB P/N 64702475D), used to expand signal measurement and communication abilities in ABB automation systems (e.g., ACS800‑67 VFD, AC800M DCS, etc.).

Power: 24 V DC

Analog I/O: 0‑10 V, ±10 V, 4‑20 mA

Digital: RS‑485 Modbus (others possible)

DIN‑rail style housing

Model label shown; tested condition not confirmed

Please confirm compatibility with your drive or control system before purchasing.

This listing is for a NEW SATCON 02046-C PCB Control Board.

OEM replacement PCB used in SatCon inverter or power control systems. Intended for use in renewable energy, industrial, or grid-tied applications. Board appears unused and is in clean, original condition.

Part No: 02046-C
Type: PCB Control Board
Condition: NEW
Application: SatCon Inverter / Power Control Systems
Open-frame circuit board

Please message us with any compatibility questions.

This listing is for a USED Siemens 6ES7 138-4FB04-0AB0 Digital Output Module.
Part of the SIMATIC ET 200S distributed I/O system, this module provides 4 digital outputs at 24 V DC with 0.5 A per channel. It includes electronic short-circuit protection and is ideal for compact automation systems.
See photos for details.

This listing is for a USED BOSCH DPR_EXPA2 YY47A.

Expansion module for Bosch Rexroth CNC systems. Designed to extend control capabilities in modular automation environments. Compatible with select Rexroth controllers.

See photos for details.

Part No: DPR_EXPA2 YY47A
Type: CNC Expansion Module
Condition: USED
Slot-In Modular Design
Industrial-Grade PCB
Compatible with Bosch Rexroth CNC Systems
Please message us with any questions.