New Arrivals

Machine Voltage: 220V, 25 KVA

This listing is for a USED Bond Fluidaire BPU-102512-1. This hydraulic power unit provides centralized hydraulic fluid supply and control for industrial machinery. The system incorporates a 5 HP three-phase motor, reservoir, hydraulic pump, and electrohydraulic control components for machine and actuator circuits.

This listing is for a USED ASCO EF8003G002. This Red-Hat solenoid provides electrical actuation for compatible ASCO valve configurations in industrial fluid-control systems. The enclosure supports hazardous-location installations and carries a 17.1 W power rating.

This listing is for a USED Riedel RL 13/0 SR. This industrial process chiller provides recirculating fluid cooling for manufacturing equipment and process applications requiring controlled heat removal. The unit operates on 400/460V three-phase power and uses R134a refrigerant.

This listing is for a USED Miller MWX-S, 300531. The portable FILTAIR fume extraction unit captures airborne welding fumes near the work area through a positionable extraction arm and hood. Its 115V single-phase configuration is suited to localized source extraction in welding, fabrication, and metalworking environments.

Table Size: 19.5″ x 12.5″
Machine Voltage: 208V, 5KVA

Machine is Mounted to Skid
Electrical Cabinet: 230V, 10 KVA
Control: 110V

This listing is for a NEW Parker 71335SN2GNJ1N0H111P3. This general-purpose solenoid valve provides electrically actuated fluid control with a 1/16″ orifice and an 11.5 W coil. The dual-frequency coil operates at 110V/50 Hz or 120V/60 Hz for integration into compatible industrial fluid-control equipment.

This listing is for a USED Bond Fluidaire BPU-102512-1. This hydraulic power unit provides centralized hydraulic fluid supply and control for industrial machinery, combining an electric motor-driven pump, reservoir, valve controls, and fluid cooling within a self-contained configuration.

This listing is for a USED Bond Fluidaire BPU-102512-1. This hydraulic power unit provides centralized hydraulic fluid supply and control for industrial machinery, incorporating a 5 HP three-phase motor, reservoir, pump, valve controls, and oil cooling. It is suited to machine hydraulic circuits requiring an integrated source of hydraulic power and fluid conditioning.

This listing is for a USED Bond Fluidaire BPU-102512-1. This hydraulic power unit supplies pressurized hydraulic fluid for industrial machinery and fluid-power systems. The configured unit incorporates a 5 HP three-phase motor, hydraulic reservoir, pump and valve controls, along with an oil cooler for thermal management of the hydraulic circuit.

This listing is for a USED General Electric 9T23B3883. This 45 kVA three-phase transformer provides voltage conversion from a 480V primary supply to a 208Y/120V secondary for industrial and commercial power distribution applications.

This listing is for a NEW Carlson Engineering A24-114. This enclosed vibratory bowl feeder provides automated fastener orientation and controlled delivery for integration with fastening and production equipment. The 24″ bowl system handles a range of screws, nuts, bolts, pins, studs, and rivets, with an integrated hopper supporting continuous part supply.

This listing is for a USED Fireye EB-700. This automatic primary safety control provides burner sequencing, flame supervision, and safety interlock control for compatible combustion equipment. The unit includes an EP160 programmer, E1R1 flame amplifier, and ED500 display module.

This listing is for a NEW United Electric H121-S137B. This pressure switch provides pressure-responsive electrical switching across an adjustable 2 to 80″ WC operating range. Its hazardous-location enclosure and 316 stainless steel wetted components support industrial pressure-monitoring and control applications.

This listing is for a NEW Dwyer 2010C Magnehelic. This differential pressure gauge provides direct indication of low air and compatible gas pressures across a 0 to 10″ WC range. Typical applications include monitoring pressure differentials in filtration, ventilation, air-handling, and other low-pressure systems.

This listing is for a NEW Carlson Engineering A24-114. The enclosed vibratory bowl feeder provides automated orientation and blow-feed delivery of fasteners for integration with compatible fastening and production equipment. The A24 configuration accommodates screws, set screws, nuts, bolts, pins, studs, and rivets in automated feed applications.

This listing is for a USED Miller MC-300VS. This constant-potential DC arc welding power source delivers a 300A rated output at 32V with a 100% duty cycle. The unit supports 200/230/460V, 3-phase, 60 Hz input power and is configured with a Miller wire feeder for continuous-wire welding operations.

This listing is for a NEW Carlson Engineering A24-114. This enclosed vibratory bowl feeder provides automated orientation and blow-feed delivery of fasteners to compatible drive-head or dispenser equipment. The 24″ bowl configuration supports screws, set screws, nuts, bolts, pins, studs, and rivets for automated fastening and production applications.

This listing is for a USED Miller MWX-S, 300531. The FILTAIR unit provides localized welding fume extraction through a positionable extraction arm and capture hood. The 115V single-phase configuration is suited to welding and fabrication work areas requiring movable source capture.

This listing is for a NEW Swivellink SLM-1. The mounting base provides a rigid mechanical foundation for compatible Swivellink modular mounting components, allowing cameras, sensors, and other automation devices to be positioned within machine vision and industrial automation installations.

This listing is for a NEW Swivellink SLM-2. The double socket clamp joins compatible Swivellink modular mounting components, allowing connected arms, bases, cameras, sensors, or automation devices to be positioned and secured within a configurable mounting assembly.

This listing is for a NEW Swivellink SLM-3-100. The modular link connects compatible Swivellink mounting components to extend and position cameras, sensors, and other automation devices within machine vision and industrial equipment installations.

This listing is for a NEW Keyence OP-88678. The prewired cable provides an M12 device connection with color-coded flying leads for integration into industrial control and automation wiring, including a dedicated frame-ground conductor.