This is a listing for a USED Hydrogenation Reactor with a thermocouple assembly and process heater. It is made of 316L stainless steel. Modern systems can be fully automated, allowing for precise control of pressure, temperature, and stirring speed for reproducible results. The process heater included is a model FD647- 480V, 6000W; the thermocouple- MGO-K-2-6-U-006-0-000-J-00-05-0 (temperature sensor).

This listing is for a USED Hewlett-Packard 8565E Spectrum Analyzer. The 8565E provides RF and microwave spectrum analysis across a frequency range of 9 kHz to 50 GHz for communications, calibration, laboratory, and electronic test environments. This configuration includes IEEE-488 connectivity, external reference capability, video output, modulation interfaces, and Option 830 rear RF output and modulation input functionality.

This listing is for a USED Vale‑Tech Integra 2. It provides an integrated industrial weighing workstation combining a platform scale, sealed operator keyboard, and display interface for weight capture and data entry applications. This system supports operator-driven weighing processes with a stainless platform, membrane keypad input, and external monitor interface suited for packaging, verification, and production environments.

This listing is for a USED Conair Franklin DM‑1 drying monitor, designed for monitoring and managing resin drying processes in plastics manufacturing environments. The DM‑1 provides real‑time monitoring of key drying parameters and supports dewpoint measurement, external alarm output, and RS‑485 (DM‑Net) communications for integration into centralized monitoring systems. Nameplate data confirms 100/250 VAC single‑phase operation at 50/60 Hz, with a 1.5 A full‑load current rating. The unit features a front‑panel display with keypad controls and multiple rear‑panel interfaces for probes, printers, and network connectivity.

This listing is for an Agilent 8563EC Spectrum Analyzer listed FOR PARTS ONLY. The 8563EC is a portable spectrum analyzer designed for RF and microwave signal analysis over a frequency range of 9 kHz to 26.5 GHz. This unit includes the installed option module, VGA output, IEEE-488 interface, reference input/output connections, and RF measurement interfaces.

This listing is for a USED Brookfield HBDV‑III+ Programmable Digital Viscometer. It is designed for precision viscosity measurement in laboratory and industrial environments. This unit is categorized as a programmable rheometer/viscometer and includes capabilities such as programmable speed sets, digital display output, and compatibility with standard Brookfield spindles.

This listing is for a USED Sciemetric 10500‑3520‑H0BC R3.0 Series Leak Test Module. This module is part of the Sciemetric 3520 leak‑test platform used for precision leak detection, flow measurement, and pressure‑decay test applications. Designed for high‑speed, high‑accuracy industrial QC testing, the 3520 Series supports fast‑fill capability, high‑resolution pressure sensing, and integration with Sciemetric PSV‑based test control environments. The unit is rated for 24V operation and requires filtered, regulated air supply to achieve proper test performance.

This listing is for a used Hioki RM3545 Resistance Meter.
It is a benchtop precision resistance meter designed for low-resistance measurement applications.

See photos for details.

Part No: RM3545
Type: Resistance Meter
Condition: USED
Brand: Hioki
Configuration: Benchtop unit
Display: Digital front panel
Includes: Attached test leads/probes as shown

This listing is for a USED Agilent 85025B Detector. The 85025B is a microwave detector designed for scalar and network measurement applications across a frequency range of 0.01 GHz to 26.5 GHz. The unit provides RF signal detection for use with compatible Agilent measurement platforms and includes an integrated interface cable and RF input connection.

This listing is for a USED Hioki RM3545 Precision Resistance Meter. The RM3545 is engineered for high‑accuracy resistance measurement in production lines, quality inspection environments, and electronics testing. It features 4‑terminal Kelvin measurement inputs, an LCD display interface, selectable measurement ranges, and fast measurement speed suitable for component evaluation and precision resistance validation.

This listing is for a USED CTS Sentinel A28‑001039 Precision Leak Test Instrument. It is designed for high‑accuracy pressure decay and flow‑based leak testing in automated or bench‑top inspection environments. This instrument belongs to the CTS Sentinel A28 series, commonly used for validating part integrity in manufacturing lines. Labeled specifications indicate multi‑voltage 100‑240V AC supply, 24VDC I/O, and pneumatic test capabilities from 0‑250 PSIG with pilot air between 55‑70 PSIG.

This listing is for a USED LeakMaster 700 Series Machine‑Mount Leak Tester. This unit is designed for industrial air‑pressure or vacuum‑based leak detection across a wide range of production and quality‑control environments. The rear panel includes USB, ENET, MODBUS RS485, Digital I/O, Air In, and PSI ports, along with a 24 VDC power input. The front touchscreen interface provides START, STOP, PURGE, LEAK, and CAL buttons for operation and calibration.

This listing is for a USED EMCO 3825/2R Line Impedance Stabilization Network. The 3825/2R is used in EMC and EMI compliance testing to provide a defined impedance between power lines and equipment under test while enabling conducted emissions measurements. This unit features dual line connections, monitor ports, power output terminals, and a ground connection for electromagnetic compatibility testing applications.

This listing is for a USED Tektronix Type 576 Semiconductor Curve Tracer. The Type 576 is designed for characterization and analysis of semiconductor devices including transistors, diodes, SCRs, FETs, and other electronic components. This instrument features a CRT display, collector supply controls, step generator functions, polarity selection, leakage measurement capability, and programmable test configurations for laboratory, service, and engineering environments.

This listing is for a USED V-TEK VERSA-II Parts Counter. It is designed for automated component counting and batch control in electronic assembly and packaging processes. This unit is categorized as a component counter system and includes the following capabilities: digital display, programmable batch settings, and integration with V-TEK taping and feeding equipment.