Fabrication and Metal Forming

View Details

2009 3/8″ T&H LEMONT MODEL #WU11-9 STAINLESS TUBE MILL USED

$229,500.00

Availability:

1 in stock

SKU: IGAM3260001

This listing is for a 3/8″ T&H Lemont WU11-9 Tube Mill.

Manufacturer: T & H Lemont
Model: WU11-9

Tube OD Range: .236″ â€“ 1.000″
Finished Tube Diameter: .312″
Wall Thickness Range: .012″ â€“ .030″
Maximum Tube Diameter: .750″
Material Capability: 316L Stainless Steel

Mill Speed: 0â€“60 FPM
Passline Height: 43″
Mill Direction: Right to Left
Voltage: 480V / 3 Phase
Welding: Laser / TIG

Driven Roll Shaft Diameter: 1.125″
Roll Space (Breakdown / Fin / Sizing): 3.000″
Nominal Roll Root Diameter: 2.500″

Uncoiler Capacity: 1,500 lbs per side
Maximum Coil Width: 12″
Maximum Coil OD: 54″
Drum Expansion: 14″â€“20″ Manual
Segments: 3

Shear & End Welder Material: 316L Stainless
Strip Width: 1.000″
Gauge Capacity: .012″
Maximum Shear Strength: 65,000 PSI
Power Supply: 110V, 20 Amp
Weld Type: TIG

Drive Motors: (3) 10 HP
Variable Motor Speed: 100â€“1150 RPM (2100 RPM Max)
Dynamic Braking: All Sections
Speed Stability: Â±1%

Flying Cutoff System: Technisales ACCU-CUT
Cut Capacity: .236″ â€“ 1.000″ OD x .012″ â€“ .030″ Wall
Maximum Line Speed: 60 FPM
Cut Length Range: 18′ â€“ 20′
Length Tolerance: Â±.020″
Tube End Squareness: .008″
Maximum OD Burr: 10% of Wall Thickness

Run-Off Table: Height Adjustable Steel Weldment with Air-Activated Dump

Eddy Current Inspection System: Eddy Check â€œSâ€ NEMA 12 with Inspection Head, Differential Encircling Coil, Probes, RF Cables, Electronic Rack, Power Supplies, Connector Box, Paint Marker, Horn & Lamp

Location: Holland, OH

View Details

48″ X 20,000LBS X .80″ HERR VOSS CUT-TO-LENGTH LINE W/PRECISION LEVELER

$195,000.00

Availability:

1 in stock

SKU: IGAM0480042

COIL CAR 20,000 LBS X 48″

ROWE COIL REEL 20,000 LBS x 48″
SERIAL R35280.5
MODEL 200048 DSJ
COIL ID 19″ TO 24.5″
COIL OD 60″
SPEED 150FPM
PUMPKIN TOOTH MANDREL
HOLD DON ARM

THREADING TABLE
HYDRAULIC LIFT

LEVELLER
SERIAL 28100-6
MODEL VKL RH 66/1.750-19/7 4 HI PR
WIDTH 66″
CAPACITY 48″ x .020 to .080″ @80K YIELD
ROLLS 13
BACK UP 4 HI
ROLL DIAMETER 1.75″
SPEED 75 FPM MAXIMUM
5 ROLL BANK ADJUSTMENT

HERR VOSS SHEAR
SERIAL 28100-8
MODEL 0308
CAPACITY .1875″

STACKING TABLE
SHEET LENGTH 24″ TO 144″

CRANE UNLOADING SYSTEM

CONTROLS

View Details

CHS PS-350-18 HDX Coil Feed Line System – USED

$129,500.00

Availability:

1 in stock

SKU: IGAM3160018

This listing is for a USED CHS PS-350-18 HDX Coil Feed Line System. It is designed for handling and straightening HSLA and similar coil stock in stamping and forming operations. This unit is categorized as a heavy-duty coil feed line and includes capabilities such as 20,000 lb coil handling, 18 inch stock width capacity, and powered straightening with advanced loop and control systems.

New Arrival

View Details

TRANSFLUID DB 2060-3A CNC-R CNC Tube & Pipe Bending Machine 20-60mm USED

$79,999.00

Availability:

1 in stock

SKU: IGAM4590001

This listing is for a USED Transfluid DB 2060-3A CNC-R. Configured for CNC-controlled tube and pipe bending, the machine combines programmable feed, rotation, and hydraulic bending functions for repeatable production forming of material from 20 mm to 60 mm diameter. The platform is suited for fabrication, automotive component manufacturing, exhaust production, furniture manufacturing, and general tube processing operations.

View Details

20 STAND X 1.5” DAHLSTROM MODEL 400-20OB ROLLFORMER 12” ROLLSPACE USED

$79,500.00

Availability:

1 in stock

SKU: IGAM3530006

View Details

IOWA PRECISION GAF60-6 / FTS-DCT6016SL Coil Slitting & Cut-To-Length Line – USED

$69,500.00

Availability:

1 in stock

SKU: IGAM3130001

This listing is for a USED Iowa Precision coil slitting and cut-to-length processing line, incorporating Model GAF60-6 uncoilers and Model FTS-DCT6016SL line configuration. The system is designed for processing steel coil material through slitting, straightening, punching/notching, scrap handling, and shearing operations. This unit is categorized as a coil processing line and includes capabilities such as variable line speed operation, hydraulic punching and shearing, adjustable slitting, and PC-based controls.

Location: OH

View Details

14 STAND X 2″ TISHKEN MODEL #14-MW-2 ROLLFORMER 8″ ROLL SPACE USED

$59,500.00

Availability:

1 in stock

SKU: IGAM3530003

This listing is for a Tishken 14-MW-2 Roll former.

Manufacturer: Tishken
Model: 14MW-2
Serial: 11245-664
Number of stands: 14
Arbor diameter: 2″
Roll space: 8″
Center distance between stands: 12″
Center distance between arbors: 5-1/2″ to 7″
Base to bottom spindle center: 5″
Keyways width: .375″
Capacity (max thickness): .109″
Hand of line: Right to left
Coolant pump: Yes
Motor, horsepower: 20 HP

Location: OH

View Details

72″ WIDE OSCILLATING TO 35 DEGREE DIE SHEAR USED

$50,000.00

Availability:

1 in stock

SKU: IGAM1980818

View Details

KOMATSU OBS60-34 66-Ton Single-Point Mechanical Gap Frame Press USED

$41,500.00

Availability:

1 in stock

SKU: IGAM4610022

This listing is for a USED Komatsu OBS60-34 single-point mechanical gap frame press. The machine provides 600 kN / 66 short ton capacity with a 120 mm stroke, 48-85 strokes per minute, 300 mm shut height, and 900 x 550 mm bolster for stamping, blanking, forming, and production pressworking operations.

Featured

Geka 165 Ton Ironworker, Model 165S - 2012 0

View Details

2012 Geka 165 Ton Ironworker, Model 165S

$37,500.00

Availability:

1 in stock

SKU: IGAM1260001

View Details

72″ WIDE OSCILLATING DIE SHEAR USED

$35,000.00

Availability:

1 in stock

SKU: IGAM1980817

View Details

72″ WIDE LINK SINGLE POSITION DIE SHEAR USED

$35,000.00

Availability:

1 in stock

SKU: IGAM1980816

View Details

Timesavers Lynx 37MWT-D-60 Wet Abrasive Finishing Machine w/ PFA-240-3 Blower USED

$29,999.00

Availability:

1 in stock

SKU: IGAM4220001

This listing is for a USED Timesavers Lynx 37MWT-D-60. Configured for wet abrasive processing, the machine supports deburring, edge rounding, oxide removal, and surface conditioning of sheet metal components through a conveyorized finishing platform. Included with the system are a Timesavers PFA-240-3 blower assembly, replacement conveyor components, abrasive consumables, and maintenance inventory supporting ongoing operation and service.

View Details

100 TON ROLLFORM INC HYDRAULIC 4 POST CUTOFF & POWER UNIT, 12″ STROKE USED

$29,500.00

Availability:

1 in stock

SKU: IGAM2930003

This listing is for a 100-ton Rollform Inc. hydraulic 4-post cutoff with power unit.

PRESS
BETWEEN POSTS 27″
RAM 32″ X 38″ X 2.375″ THICK
BED 35″ X 38″ X 4″ THICK
4 WAY ADJUSTABLE BED
RAILS 58″ LONG
OPEN HEIGHT 28″ ADJUSTABLE
SLUG CHUTE

HYDRAULIC CYLINDER
PART 1H000146770
SERIAL K2612530001C
MODEL 12.00JJ3HKP355N4.000
PRESSURE 3,000 PSI
HOUSING 14″ DIAMETER
CYLINDER 7″ DIAMETER
STROKE 12″ ESTIMATE

HYDRAULIC UNIT
PARKER BLADDER ACCUMULATOR
OIL COOLER
MOTOR 20 HP
LOCATION OH

View Details

Timesavers Lynx 37MWT-D-60 Wet Abrasive Finishing Machine w/ PFA-240-3 USED

$27,500.00

Availability:

1 in stock

SKU: IGAM4220002

This listing is for a USED Timesavers Lynx 37MWT-D-60. The machine utilizes a conveyorized wet-processing platform for deburring, edge refinement, oxide removal, and surface conditioning of fabricated metal components. Included with the system are a Timesavers PFA-240-3 auxiliary unit, centrifugal blower assembly, coolant handling equipment, and maintenance components supporting finishing operations.

View Details

12,000 LB X 24″ X .090″ DALLAS COIL REEL UNCOILER & FEEDER STRAIGHTENER FEED LINE USED

$27,500.00

Availability:

1 in stock

SKU: IGAM3210004

This listing is for a Dallas Coil Reel Uncoiler & Feeder Straightener Feed Line.

COIL REEL
Serial: 19260
Model: DPR-12000 X 48″ RH
Capacity: 12,000 LBS
Coil Width: 48″
Coil ID: 20″ to 24″
ID Expansion: Hydraulic
Coil OD: 60″
Hold Down Arm: Motorized
Reel: Motorized
Drive: AC Variable Speed

STRAIGHTENER
Serial: 21874
Model: DRFES-424
Capacity: 24″ x .090″; 18″ x .105″
Straightener: 7 Roll (3 Over 4)
Motorized
Base: Adjustable Height
Entry: Cascade Rolls
Entry Edge Guides
Entry & Exit Pinch Rolls: Pneumatic
Press Mount Cabinet
Control: PLC

Location: OH

View Details

ACRA-BEND US888 CNC Hydraulic Press Brake USED

$27,000.00

Availability:

1 in stock

SKU: IGAM4510001

This listing is for a USED Acra-Bend US888. This CNC hydraulic press brake performs sheet metal bending and forming operations using programmable ram control and a powered backgauge system. The machine is equipped with a touchscreen operator interface, SICK C4000 safety light curtain, rear guarding, and hydraulic tooling support for fabrication and production bending applications.

View Details

HACO ERMS 25100 Hydraulic Press Brake 100 Ton USED

$25,000.00

Availability:

1 in stock

SKU: IGAM4460014

This listing is for a USED HACO ERMS 25100 hydraulic press brake. This hydraulic forming machine provides controlled bending and forming of sheet metal components through a powered upper beam and precision tooling interface. The machine is rated at 100 tons and incorporates a HACO ATS 560 control system for production and setup operations.

View Details

PACIFIC 250 PF-OBS 250-Ton Hydraulic Press USED

Availability:

1 in stock

SKU: IGAM2600010

This listing is for a USED Pacific 250 PF-OBS Hydraulic Press. It is designed for heavy-duty metal forming and punching operations in industrial environments. This unit is categorized as a 250-ton hydraulic press and includes a maximum capacity of 250 tons, punching capacity of 166 tons, and a hydraulic relief setting of 2350 PSI.

View Details

ROWE 7530-DSJ REEL & B-30 FEEDER STRAIGHTENER COMBO USED

$23,995.00

Availability:

1 in stock

SKU: IGAM2120002

This listing is for a Rowe 7530-DSJ Reel & B-30 Feeder Straightener.

Manufacturer Rowe
Model No. 7530-DSJ Uncoiler
Serial No. 27487
Voltage 440 Volts
Phase 3 Phase
Frequency 60 Hz
Full Load Amps 5 F.L. Amps
Speed 1800 RPM
Motor 1.5 HP
Duty Continuous
Wiring Diagram No. 5E-2-R

Manufacturer Rowe
Model B-30 Coil Feed Straightener
Serial number 7488
Machine type coil feeder straightener
Minimum material thickness 0.030 in mild steel
Maximum material thickness 0.065 in steel

Location Alto, MI

View Details

PIRANHA P50 50 Ton Hydraulic Ironworker w/ Tooling USED

$21,000.00

Availability:

1 in stock

SKU: IGAM3290001

This listing is for a USED Piranha P50 50-Ton Ironworker. It is designed for punching, shearing, and notching mild steel. This unit is categorized as a hydraulic ironworker and includes capabilities such as 50-ton punch force, punching capacity up to 1-1/16 inch through 1/2-inch mild steel, multiple shear stations, and coper/notcher functionality.

View Details

Schechtl MSB150 BV Powered Sheet Metal Shear 1500mm USED

$19,995.00

Availability:

1 in stock

SKU: IGAM4030005

This listing is for a USED Schechtl MSB150 BV. This powered shear executes straight-line cutting of sheet metal using a motor-driven guillotine mechanism paired with a backgauge positioning system and operator control interface, supporting repeatable fabrication and panel processing operations.

View Details

FANUC ROBOCUT Alpha-0iB A04B-0313-B011#U5 Wire EDM USED

$19,500.00

Availability:

1 in stock

SKU: IGAM4620005

This listing is for a USED FANUC ROBOCUT Alpha-0iB, type A04B-0313-B011#U5. This CNC wire electrical discharge machine provides precision cutting of electrically conductive materials using a continuously fed wire electrode. The machine is equipped with a FANUC Series 180is-W control and includes the separate electrical cabinet and fluid processing equipment.

View Details

DALLAS INDUSTRIES CODE 06521 COIL REEL CUTTER USED

$19,500.00

Availability:

1 in stock

SKU: IGAM0840001

Last Chance Deal

View Details

NUMALLIANCE MIB PRESS w/ Hydraulic Pump and Reservoir System USED

Availability:

1 in stock

SKU: IGAM1630006

This used Numalliance MIB Press is a compact yet powerful hydraulic press system, designed for precision metal forming and part shaping operations. Outfitted with a hydraulic pump and reservoir system, this unit delivers consistent force and operational efficiency. The press offers a 30″ wide part/tool entrance between the rails and a 29″ full bed length, allowing for a variety of tool and part configurations. The maximum allowable entry height without tooling is 25″, based on the travel limit switch, making it well-suited for forming taller parts or dies. Known for its industrial-grade build quality, this Numalliance press is ideal for manufacturers seeking reliability and flexibility in a used forming solution.

NUMALLIANCE MIB PRESS, used press equipment available. Ideal for various industrial applications. Effective in delivering precise performance. Contact for more information and to arrange a viewing.

View Details

Komatsu OES150-3 150 Ton OBI Press USED

$17,995.00

Availability:

1 in stock

SKU: IGAM0480067

This listing is for a used Komatsu OES150-3 OBI Press. Designed for metal stamping and forming applications, this machine delivers reliable, repeatable performance in production environments. It features a 150-ton capacity, a 7.9″ slide stroke, and a 17.7″ die height. The open back inclinable (OBI) design provides convenient access to the work area and supports efficient material handling and setup.

Buyer responsible for loading and trucking.
Estimated rigging: $6500

Location: South Carolina

View Details

1999 ADIRA GVX 1340 Hydraulic Power Shear USED

Availability:

1 in stock

SKU: IGAM3360001

This listing is for a USED Adira GVX 1340 Heavy Duty Hydraulic Shear. Designed for industrial sheet‑metal processing, this machine provides a maximum cutting force of 493 kN and supports mild steel cutting up to 19.5 mm thickness. It features a 4080 mm working length and is built with a rigid frame and hydraulic cutting system for consistent, high‑accuracy shearing. The unit was manufactured in 1999 and includes OEM nameplate specifications for electrical supply and cutting capacity.

12,000 LB X 24" X .090" DALLAS COIL REEL UNCOILER & FEEDER STRAIGHTENER FEED LINE USED 12

View Details

24” X .090” DALLAS MODEL #DRFES-424 MOTORIZED COIL STRAIGHTENER USED

$14,500.00

Availability:

1 in stock

SKU: IGAM3210003

This listing is for a Dallas DRFES-424 Motorized Coil Straightener.

Manufacturer: Dallas
Model: DRFES-424
Serial: 21874
Capacity: 24″ x .090″; 18″ x .105″
Straightener: 7 Roll (3 over 4)
Motorized: Yes
Base: Adjustable Height
Entry: Cascade Rolls
Entry Edge Guides
Entry & Exit Pinch Rolls: Pneumatic
Press Mount Cabinet
Control: PLC

Location: OH

View Details

STANDARD CS250-10 SHEAR

$13,995.00

Availability:

1 in stock

SKU: IGAM0480048

View Details

ACCUPRESS 10′ X 1/2″ ACCUSHEAR MODEL 850010 – USED

$13,850.00

Availability:

1 in stock

SKU: IGAM0480060

This listing is for a USED ACCUPRESS AccuShear Model 850010. It is designed for precision metal cutting and shearing operations in industrial environments. This unit is categorized as a hydraulic shear and includes the following capabilities: 10-foot cutting length, 1/2-inch maximum thickness capacity, and rugged hydraulic operation for consistent performance.

CAPACITY: 10′ X 1/2″
INCLUDES 48″ BACK GAUGE

LOCATION: YOUNGSTOWN OH
*PRICE INCLUDES LOADING ONTO FLATBED.