Fabrication and Metal Forming - Page 2 of 9 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Fabrication and Metal Forming

Tru Shear 8/2500 Hydraulic Shear USED 0

Tru Shear 8/2500 Hydraulic Shear USED

$12,500.00

Availability:

1 in stock

SKU: IGAM3770002

This listing is for a USED Tru Shear 8/2500 hydraulic shear. The machine is a floor‑mounted metal cutting shear designed for straight cutting of sheet material in industrial fabrication environments. It features a front control panel, hydraulic cutting system, and a heavy steel base with integrated guarding.

4,000 LBS X 18" CWP MODEL #3RD18 PULL OFF DOUBLE END UNCOILER COIL REEL USED 0

4,000 LBS X 18″ CWP MODEL #3RD18 PULL OFF DOUBLE END UNCOILER COIL REEL USED

$12,500.00

Availability:

1 in stock

SKU: IGAM0900003

THOMSON T3 CLAMSHELL DIE CUTTING PRESS 29 X 43 USED 0

THOMSON T3 CLAMSHELL DIE CUTTING PRESS 29 X 43 USED

Availability:

1 in stock

SKU: IGAM3200005

This listing is for a used Thomson clamshell die cutting press, model T3. This machine features a 29″ x 43″ cutting area and is commonly used in paperboard, carton, packaging, and print finishing operations for die cutting, creasing, and embossing. Unit includes operator control panel, flywheel drive, and foot brake as shown.

See photos for details.

Part No: T3
Type: Clamshell Die Cutting Press
Condition: USED
Manufacturer: Thomson
Cutting Area: 29 in x 43 in
Operation: Mechanical, flywheel-driven
Application: Die cutting, creasing, embossing

Overall condition is consistent with normal industrial use.

New Arrival

ROWE 12040‑DS/L Uncoiler / Decoiler USED 0

ROWE 12040‑DS/L Uncoiler / Decoiler USED

$12,000.00

Availability:

1 in stock

SKU: IGAM0530063

This listing is for a USED Rowe 12040‑DS/L coil uncoiler (decoiler). The Rowe 12040‑DS/L is a motorized coil handling unit designed to support and unwind metal coils for feeding into stamping presses, roll formers, and other coil‑fed processing equipment. The unit is rated for coils up to 12,000 lb, with a maximum coil width of 40 inches and a maximum coil outside diameter of 60 inches, making it suitable for heavy‑duty industrial metal fabrication environments.

AMADA RG‑50 Press Brake with NC‑9EX Controller USED 0

AMADA RG‑50 Press Brake with NC‑9EX Controller USED

$12,000.00

Availability:

1 in stock

SKU: IGAM3820001

This listing is for a USED AMADA RG‑50 press brake equipped with an NC‑9EX controller. This machine is designed for sheet metal bending operations in fabrication and manufacturing environments and is commonly used for forming, bending, and shaping metal parts. The RG‑50 platform is a hydraulic press brake intended for general‑purpose production and job shop applications.

PREMIER 425.2.E.R CNC Press Brake 25 Ton USED 0

PREMIER 425.2.E.R CNC Press Brake 25 Ton USED

$12,000.00

Availability:

1 in stock

SKU: IGAM3790002

This listing is for a USED Premier 425.2.E.R CNC press brake rated at 25 tons. This press brake is equipped with a Hurco Autobend 7 CNC control, providing programmable bending and backgauge control for repeatable sheet metal forming. It is commonly used in fabrication shops, manufacturing environments, and OEM production for bending brackets, panels, and small structural components.

BRIDGEPORT SERIES II Vertical Milling Machine with Digital Readout USED 0

BRIDGEPORT SERIES II Vertical Milling Machine with Digital Readout USED

$11,995.00

Availability:

1 in stock

SKU: IGAM3860005

This listing is for a USED Bridgeport Series II vertical milling machine. The Bridgeport Series II is a full‑size manual knee mill designed for general‑purpose machining operations such as milling, drilling, and boring. This machine features a rigid knee‑type construction, a large T‑slot worktable, and a Bridgeport‑branded vertical head. The machine is equipped with a digital readout (DRO) system and is suitable for toolrooms, maintenance shops, and industrial machining environments.

BENTENBENDER 6-70T PRESS BRAKE USED 0

BENTENBENDER 6-70T PRESS BRAKE USED

$11,995.00

Availability:

1 in stock

SKU: IGAM1100001

The Betenbender 6-70T Press Brake with Automec CNC 150 Autogauge is a used hydraulic forming machine designed for accurate and consistent metal bending operations. This machine offers a 70-ton capacity over a 6-foot bed, making it ideal for mid-sized production needs. With 45,507 hours of operation and currently located in Alto, MI, this press brake is equipped with the Automec CNC 150 Autogauge system, providing programmable backgauge control for enhanced accuracy and repeatability. Known for its robust construction and reliable performance, this Betenbender model is well-suited for job shops, fabricators, and maintenance departments.

TOX PRESSOTECHNIK MAG 030.663.A.001 0

TOX PRESSOTECHNIK MAG 030.663.A.001

Availability:

1 in stock

SKU: IGAM1240039

TOX PRESSOTECHNIK MAG 030.663.A.001 USED 0

TOX PRESSOTECHNIK MAG 030.663.A.001 USED

Availability:

1 in stock

SKU: IGAM1240038

Featured

TOX PRESSOTECHNIK MAG 20 TON HYDRAULIC AIR PRESS, 2021 0

TOX PRESSOTECHNIK MAG 20 TON HYDRAULIC AIR PRESS, 2021

Availability:

1 in stock

SKU: IGAM1240022

The Used 2021 TOX PRESSOTECHNIK MAG 20 Ton Hydraulic Air Press is a robust industrial press engineered for high-performance applications requiring reliable and repeatable force. Designed with TOX’s innovative air-over-oil technology, this 20-ton capacity press delivers strong, smooth pressing power while conserving energy. Manufactured in 2021, this used unit offers excellent value for manufacturers seeking premium pressing capabilities with a reduced upfront investment. Ideal for a wide range of industrial processes, the MAG 20 is trusted for its precision, compact footprint, and low-maintenance design.

TOX PRESSOTECHNIK MAG 20 TON HYDRAULIC AIR PRESS, 2021 0

TOX PRESSOTECHNIK MAG 20 TON HYDRAULIC AIR PRESS, 2021

Availability:

1 in stock

SKU: IGAM1240026

The Used 2021 TOX PRESSOTECHNIK MAG 030.663.A.001 Press is a precision-engineered, air-over-oil hydraulic press built to deliver dependable force in high-volume manufacturing environments. This specific model from the TOX MAG series is equipped with advanced TOX-Powerpackage technology, offering controlled, high-force performance in a compact and modular format. Manufactured in 2021, this used press remains a cost-effective choice for operations that demand reliability, precision, and integration flexibility across various industrial sectors.

NIAGARA IF 10' X 1/4 SHEAR 0

NIAGARA IF 10′ X 1/4 SHEAR

$10,850.00

Availability:

1 in stock

SKU: IGAM2570001

LOCATION: GRAND RAPIDS MI
Specifications:
Thickness – mild steel: 1/4″
Length: 10 ft
Blade
Rake: 3/8″ per ft
Length: 10′-2 1/2″
Section: 3/4″ × 3″
Back Gage Range: 36″
Speed
Full Stroke: 24 SPM
Short Stroke: 60 SPM
Motor: 15 HP
Overall Dimensions
F to B without Front Brackets: 75-1/2″
L to R: 145-1/2″
Height: 60″

Preliminary Specifications – Subject to Verification

COE CPRF-324 Press Feed System with Denison Multipress and Air Feeds SB-34 USED 0

COE CPRF-324 Press Feed System with Denison Multipress and Air Feeds SB-34 USED

$10,000.00

Availability:

1 in stock

SKU: IGAM3770001

This listing is for a USED integrated press feed and forming system consisting of a COE Press Equipment CPRF‑324 roll feed, an Air Feeds Inc. SB‑34 stock handling component, and a Denison Multipress hydraulic press. The system is arranged as a unified production cell designed to feed strip material into a hydraulic press for forming or assembly operations.

AMT ACE 60 Inch Machine Tool Brake Toe Bender USED 0

AMT ACE 60 Inch Machine Tool Brake Toe Bender USED

$9,950.00

Availability:

1 in stock

SKU: IGAM3130002

This listing is for a USED AMT ACE 60-inch Machine Tool Brake Toe Bender. It is designed for forming and bending metal flanges, toes, and edges in fabrication and shop environments. This unit is categorized as a manual or mechanically assisted metal forming machine and includes capabilities for controlled bending across wide material lengths, repeatable edge forming, and shop-floor fabrication support.

Location: OH

10 STAND ALVAREZ ROLLFORMER USED 0

10 STAND ALVAREZ ROLLFORMER USED

$9,950.00

Availability:

1 in stock

SKU: IGAM3090003

10 STAND X 20" ROLL SPACE ALVAREZ CPS--20 ROLLFORMER USED 0

10 STAND X 20″ ROLL SPACE ALVAREZ CPS–20 ROLLFORMER USED

$9,950.00

Availability:

1 in stock

SKU: IGAM3090002

This listing is for a 10-stand x 20″ roll space Alvarez rollformer.

Manufacturer: Alvarez Roll Form
Number of Stands: 10
Roll Space (maximum width between shafts): 20″
Drive Motor: 5 HP Reliance Electric, 3-phase, 208–230/460V, 1740 RPM
Application: Roll forming of sheet/coil material into consistent profiles
Condition: Used
Location: OH

Hammond Roto‑Finish Vortex 12 Vibratory Finishing Machine USED 0

Hammond Roto‑Finish Vortex 12 Vibratory Finishing Machine USED

$9,500.00

Availability:

1 in stock

SKU: IGAM0530028

This listing is for a USED Hammond Roto‑Finish Vortex 12 vibratory finishing machine. The unit is a bowl‑style finishing system designed for deburring, surface finishing, and parts conditioning in industrial manufacturing environments. It features a circular finishing bowl with internal separation and a fixed base-mounted drive system.

BLANCHARD NO18 ROTARY SURFACE GRINDER USED 0

BLANCHARD NO18 ROTARY SURFACE GRINDER USED

Availability:

1 in stock

SKU: IGAM1550001

The Used BLANCHARD No. 18 36″ Vertical Rotary Surface Grinder is a robust and time-tested machine built for high-precision surface grinding of large, flat workpieces. Known for producing the distinctive “Blanchard grind,” this vertical spindle rotary grinder features a 36-inch magnetic chuck and is engineered to deliver fast material removal with excellent surface flatness. The No. 18 is ideal for applications requiring consistent finishes across wide areas, and its durable construction makes it a long-term asset in both high-production and job shop environments.

ROYSON CTT-15 Parts Tumbler USED 0

ROYSON CTT-15 Parts Tumbler USED

Availability:

1 in stock

SKU: IGAM1810022

AIM 35* Ton Hydraulic Press USED 0

AIM 35* Ton Hydraulic Press USED

Availability:

1 in stock

SKU: IGAM1630005

*System is presumed to be a 35 Ton system but can not be confirmed.

Bed width is 35″ between cylinders and the bed length across the full table is 46.5″. The max height clearance under the top plate is 23″ allowing for you to load tooling roughly 35″ x 46″ x 23.”

Discover a quality used AIM press in good condition. Ideal for your production needs, this model offers reliable performance. Don’t miss out on the opportunity to enhance your operations with this dependable equipment. Contact us for more details.

20 TON PNEUPOWR AIRAM MODEL #4P20 PNEUMATIC PRESS 3” STROKE USED 0

20 TON PNEUPOWR AIRAM MODEL #4P20 PNEUMATIC PRESS 3” STROKE USED

$8,950.00

Availability:

1 in stock

SKU: IGAM3530007

1.25" PINES MODEL #1-1/4 HIGH SPEED ROTARY HYDRAULIC BAR, TUBE & PIPE BENDER 0

1.25″ PINES MODEL #1-1/4 HIGH SPEED ROTARY HYDRAULIC BAR, TUBE & PIPE BENDER

$8,500.00

Availability:

1 in stock

SKU: IGAM1330001

The 1.25″ Pines Model #1-1/4 High-Speed Rotary Hydraulic Bar, Tube & Pipe Bender is a versatile and efficient bending solution designed for high-performance bending of bars, tubes, and pipes. Featuring al 20 horsepower hydraulic motor and the Dial-A-Bend V Control, this machine offers precise, adjustable bending capabilities.
Location: OH

YANG IRON YAM-GU27-100H CYLINDRICAL GRINDER USED 2

YANG IRON YAM-GU27-100H CYLINDRICAL GRINDER USED

$8,000.00

Availability:

1 in stock

SKU: IGAM2020010

1,100 LB X 14" W GSW LUDM 500/1400 PULL OFF DOUBLE END COIL REEL UNCOILER USED 1

1,100 LB X 14″ W GSW LUDM 500/1400 PULL OFF DOUBLE END COIL REEL UNCOILER USED

$7,950.00

Availability:

1 in stock

SKU: IGAM3530009

This listing is for a GSW LUDM 500/1400 Pull Off Double End Coil Reel Uncoiler.

Manufacturer: GSW
Model: LUDM 500/1400
Serial: 6486
New: 1997
Double End
Brakes: Pneumatic
Load Capacity (Max): 1,102.3 lbs (500 kg)
Material Width (Max): 14.17 inches (360 mm)
Coil Outer Diameter (Max): 55.12 inches (4.59 ft) (1,400 mm)
Mandrel Height: 43.31 inches (3.61 ft) (1,100 mm)
Expansion Range: 12.20 to 25.39 inches (310 to 645 mm)

Location: OH

4,000 LB AMERICAN MODEL #70 DOUBLE END PULL OFF COIL REEL UNCOILER 0

4,000 LB AMERICAN MODEL #70 DOUBLE END PULL OFF COIL REEL UNCOILER

$7,950.00

Availability:

1 in stock

SKU: IGAM3530005

This listing is for an American #70 Double End Pull Off Coil Reel Uncoiler.

Manufacturer: American
Model: 70
Serial: 8289
Capacity: 4,000 lbs per side
Coil Width: 28″
Double End
Pull Off: Non Motorized
Coil ID: 12″ to 20″
Coil OD: 60″
ID Expansion: Manual
Drag Brake: Pneumatic Air
Base Area: 48″ x 48″

Location: OH

10" X 6,000 LB JACO JSHCC COIL CRADLE & STRAIGHTENER 0

10″ X 6,000 LB JACO JSHCC COIL CRADLE & STRAIGHTENER

$7,950.00

Availability:

1 in stock

SKU: IGAM3210006

6,000 X 12" COLT MODEL #CR-60-12 MOTORIZED COIL REEL UNCOILER USED 0

6,000 X 12″ COLT MODEL #CR-60-12 MOTORIZED COIL REEL UNCOILER USED

$7,950.00

Availability:

1 in stock

SKU: IGAM3210002

This listing is for a Colt #CR-60-12 Motorized Coil Reel Uncoiler.

Manufacturer: Colt
Model: CR-60-12
Serial: 1201736
Capacity: 6,000 lbs
Coil Width: 12″
Coil ID: 16″ to 21″
ID Adjustment: Hydraulic
Coil OD: 60″
Backer Plate: 60″
Coil Keepers: Yes
Controls: Yes
Control Type: Dancer Arm
Speed: 15 RPM
Motor: 1 HP

Location: OH

40" KENT BURRMASTER MODEL #BM05-040R-X TUBE END DEBURRING BRUSH MACHINE USED 0

40″ KENT BURRMASTER MODEL #BM05-040R-X TUBE END DEBURRING BRUSH MACHINE USED

$7,950.00

Availability:

1 in stock

SKU: IGAM2930006

18 TON TISHKEN 4 POST MECHANICAL CUT-OFF PRESS USED 0

18 TON TISHKEN 4 POST MECHANICAL CUT-OFF PRESS USED

$7,950.00

Availability:

1 in stock

SKU: IGAM2930002