This listing is for a NEW HARRIS 447-80-IGG-1/4. It provides regulated flow control for inert gas applications, supporting up to 80 SCFH output with CGA 580 inlet connection and 1/4″ outlet, designed for precision gas delivery in industrial, welding, and fabrication environments.

This listing is for a NEW SMC VQC5101-51. It provides directional control of compressed air in pneumatic systems using a 5-port, 2-position solenoid valve configuration, supporting air flow switching and actuator control within industrial automation applications.

This listing is for a NEW SMC AMG850-N20D. It provides removal of moisture, oil mist, and particulates from compressed air systems, supporting filtration and air treatment in industrial pneumatic applications with a maximum pressure of 1.0 MPa and G3/4 port connections.

This listing is for a NEW BANNER STAKES PL4108. It provides a wall-mounted retractable barrier system for access control and safety zone definition, featuring an 8-foot belt with printed caution messaging, integrated retraction mechanism, and mounting hardware for installation in industrial and facility environments.

This listing is for a NEW SMC VS8-3-A06-X11-XG. This unit provides a pneumatic sub-base mounting interface for ISO-style valve systems, supporting centralized air distribution with G3/4 port connections and multi-pin electrical interfacing for integration into industrial automation valve assemblies.

This listing is for a NEW SMC ISE70-N02-L2. It provides digital pressure monitoring and switching within pneumatic systems, supporting a 0 to 1 MPa range with 24V DC operation and integrated display for setpoint adjustment and status indication in industrial automation environments.

This listing is for a NEW SMC VV5QC41-1203TSKAN. It provides centralized pneumatic distribution and valve mounting through a modular manifold system with integrated EX260 IO-Link communication, supporting 24V DC signal control and multi-station valve operation in industrial automation environments.

This listing is for a NEW SMC VV5QC41-0403TSKAN. It provides centralized pneumatic distribution and valve mounting through a modular manifold system with integrated EX260 IO-Link communication, supporting multi-station solenoid valve control with 24V DC input and signal output for industrial automation applications.

This listing is for a USED CONAIR HARMO EXF-450 PC-EIID. It functions as a hardwired industrial control unit providing sequencing, timing, and operator interface control for automation equipment, integrating multi-pin connection interfaces, onboard circuit protection, and panel-mounted controls for machine operation in production environments.

Location: Cleveland Oh
Buyer responsible for rigging
Cutting hours: 12,723 hrs
Discover efficiency with the 2014 TONGTAI HB-630 HMC. Ideal for precision tasks, featuring a 630 mm pallet, 1,050 mm X-axis, 850 mm Y-axis, 970 mm Z-axis, 10,000 RPM spindle speed, and 60-tool ATC. Perfect for your machining needs.

This listing is for a USED Square D PQ3606G I‑Line busway unit. It is a fusible bus plug–style electrical distribution component designed for installation on Square D I‑Line busway systems. The enclosure contains installed fuses and an external ON/OFF operating handle. The unit is intended for use as a fusible tap‑off device on Square D I‑Line busway systems, providing a means to distribute power to downstream equipment through a fused disconnect assembly.

This listing is for a USED FANUC Arc Mate 120iD complete system. It includes an R-30iB Plus controller, iPendant teach pendant, Fronius TPS 400i welding unit, and 20-inch riser, configured to support robotic arc welding operations with 25 kg payload capacity, approximately 1831 mm reach, and multi-voltage three-phase input capability.

This listing is for a USED FANUC Arc Mate 120iD complete system. It includes an R-30iB Plus controller, iPendant teach pendant, Fronius TPS 400i welding power source, and 20-inch riser, supporting automated arc welding operations with multi-voltage three-phase input capability.

This listing is for a NEW BANNER B-TL70-Q5. This base module provides the electrical interface and mounting foundation for TL70 tower light systems, supporting quick-disconnect connectivity and modular stack light configuration in industrial signaling applications.

This listing is for a NEW BANNER SMBAMS30RA. It provides an adjustable mounting solution for 30 mm cylindrical sensors, allowing controlled positioning and secure attachment within industrial sensing applications where alignment and stability are required.

This listing is for a NEW RETRACTA-BELT WM412SB20-CAU-RE. This wall-mounted retractable barrier provides controlled access restriction using an extendable belt, supporting temporary or permanent safety zone definition in industrial and facility environments.

This listing is for a NEW HUBBELL HBL460MI7W. This mechanical interlock controls power delivery through a pin and sleeve receptacle interface, preventing engagement or removal of the plug under load while supporting 60A, 480VAC three-phase circuits.

This listing is for a NEW HUBBELL HBL460P7W. It provides high-amperage electrical connection through a pin and sleeve interface rated at 60A and 480VAC, supporting secure power distribution in industrial environments requiring 3-pole 4-wire grounding configurations.

This listing is for a USED Square D KAL26200 thermal‑magnetic circuit breaker. It is designed for branch or feeder circuit protection in commercial and industrial electrical distribution systems, providing manual switching and thermal‑magnetic overcurrent protection, rated at 200 A with interrupting capacities of up to 65 kA at 240 VAC, 35 kA at 480 VAC, and 18 kA at 600 VAC.

This listing is for a NEW BALLUFF BCC M414-M414-6D-338-ES64N9-200. It provides a fixed-length M12 to M12 connection for extended cable runs, supporting signal and power transmission between field devices across larger industrial installations

This listing is for a NEW BALLUFF BCC M414-M414-6D-338-ES64N9-030. It provides a pre-terminated M12 to M12 connection using a fixed-length cable for signal and power distribution between field devices in industrial control systems.

This listing is for a NEW PARKER P33TB96DBEN. It manages controlled pressurization and exhaust of compressed air systems using a 24VDC solenoid with an operating range of 30–150 PSI, supporting safe startup and shutdown of pneumatic circuits.

This listing is for a NEW BALLUFF BCC M414-M414-6D-338-ES64N9-150. The assembly provides a fixed-length M12 to M12 connection for field devices, supporting signal and power transmission across extended routing distances in industrial installations.

This listing is for a NEW BALLUFF BCC M414-M414-6D-338-ES64N9-020. This pre-assembled cordset provides a direct connection between field devices using M12 circular connectors with a fixed-length molded cable, supporting signal and power transmission in industrial automation environments.