Fabrication and Metal Forming - Page 6 of 9 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Fabrication and Metal Forming

NEW 20,000# x 60" OD Coilquip Mechanical Upender with Rotation 0

NEW 20,000# x 60″ OD Coilquip Mechanical Upender with Rotation

$50,850.00

Availability:

Out of stock

SKU: IGAM2290003

Brand new, made-to-order MADE in the USA
20,000 pound capacity
60″ O.D. coil maximum (also available in 80″ O.D.)
Removable, 3-position v-saddle
Deck dimensions 48″ x 48″
2-Channel Lodar remote controls (two included)
Wired diagnostic pendant included
2hp eurodrive motor and gearbox
Dual #100 roller chain drive
208-230/460/3/60 or 230/1/60
Dimensions approx. 54″ L x 72″ W x 75″ H
Weight approx. 3,500lb
Fork slots for easy relocation
Rotating 20,000lb 60″ Max O.D. Slew Ring
Coilquip 180-degree rotational base upgrade for 20,000lb 60″ max O.D.
mechanical upender.
Mechanically-driven (worm gear) slew ring
Separate control functions: control switch inside machine selects upendonly,
rotate-only, or simultaneous operation.
No hydraulics
Note: This rotational upgrade does not utilize a chain, sprocket, and
castors, as
does most of the industry. It is a mechanically-driven slew ring, which
requires
far less maintenance and downtime.
Delivery: 6 – 8 Weeks – upon receipt of purchase order and deposit
Terms: 50% Down with order / 50% Balance prior loading.

TRUMPF TRUBEND 3120 CNC PRESS BRAKE 132T 122IN 4-AXIS USED 0

TRUMPF TRUBEND 3120 CNC PRESS BRAKE 132T 122IN 4-AXIS USED

$45,000.00

Availability:

Out of stock

SKU: IGAM2110001

This listing is for a USED TRUMPF TruBend 3120 CNC Press Brake.

High-precision 4-axis hydraulic press brake with 132-ton capacity and 122″ bending length. Equipped with CNC crowning, front sheet supports, and TRUMPF graphical control. Ideal for precision metal forming in industrial fabrication environments.

See photos for details.

Part No: TruBend 3120
Type: CNC Hydraulic Press Brake
Condition: USED
Press Force: 132 tons
Bending Length: 122″
Stroke: 7.87″
Axes: 4-Axis CNC (Y1, Y2, X, R)
Control: TRUMPF CNC
Please message us with any questions.

Location: Detroit, MI

U.S. INDUSTRIAL MACHINERY 155 TON X 12' CNC BRAKE PRESS 0

U.S. INDUSTRIAL MACHINERY 155 TON X 12′ CNC BRAKE PRESS

$35,000.00

Availability:

Out of stock

SKU: IGAM1930003

2012 ANDERSON COOK MARAND 34461 SPLINE ROLLER - USED 0

2012 ANDERSON COOK MARAND 34461 SPLINE ROLLER – USED

$32,500.00

Availability:

Out of stock

SKU: IGAM020001

ACCURPRESS 710012 100 Ton x 12' Hydraulic Press Brake w/ Tooling USED 0

ACCURPRESS 710012 100 Ton x 12′ Hydraulic Press Brake w/ Tooling USED

$32,000.00

Availability:

Out of stock

SKU: IGAM2730001

This listing is for a USED Accurpress 710012 Hydraulic Press Brake.

100-ton press brake with 12-foot bed, 2-axis back gauge, and tooling included. Ideal for precision sheet metal forming in industrial fabrication environments.

See photos for details.

Part No: 710012
Type: Hydraulic Press Brake
Condition: USED
Tonnage: 100 Tons
Overall Length: 12′
Between Housings: 124″
Stroke: 8″
Axes: 2-Axis Back Gauge
Tooling: Included
Year: 1993

Please message us with any questions.

1973 300 TON DAKE H-FRAME ELECTRIC HYDRAULIC PRESS USED 0

1973 300 TON DAKE H-FRAME ELECTRIC HYDRAULIC PRESS USED

$29,500.00

Availability:

Out of stock

SKU: IGAM1510001

This used 1973 Dake 300 Ton H-Frame Electric Hydraulic Press, Model 23-298, delivers industrial-grade force and reliability for a variety of heavy-duty forming and pressing applications. With a rated capacity of 300 tons and an up stroke capacity of 115 tons, this electric hydraulic press is built for strength and versatility. Located in New Jersey, it includes heavy-duty V-blocks, an adjustable table (forklift accessible), and a separate hydraulic unit for optimized maintenance and control. The wide 108″ opening between uprights and 48″ max ram-to-table clearance make this press ideal for large and complex workpieces.

2005 U.S. INDUSTRIAL MACHINERY 12' X 1/4" CNC SHEAR 0

2005 U.S. INDUSTRIAL MACHINERY 12′ X 1/4″ CNC SHEAR

$28,500.00

Availability:

Out of stock

SKU: IGAM1930002

This used 2005 U.S. Industrial Machinery 12′ x 1/4″ CNC Shear is a powerful hydraulic shearing machine designed for precision cutting of mild steel up to 1/4″ thick. With a robust 15 HP motor and a 144″ blade length, this shear is well-suited for high-capacity metal fabrication environments. The system includes a front-operated 36″ power back gauge, adjustable rake, and power blade gap adjustment for enhanced control and cut quality. It features hydraulic hold-downs, ball transfers, and a squaring arm for smooth material handling, along with an electric foot pedal for hands-free operation. Additional blades are included, offering long-term value and reduced downtime.

2005 U.S. INDUSTRIAL MACHINERY 12' X 1/4" CNC SHEAR 0

2005 U.S. INDUSTRIAL MACHINERY 12′ X 1/4″ CNC SHEAR

$28,500.00

Availability:

Out of stock

SKU: IGAM0001

This used 2005 U.S. Industrial Machinery 12′ x 1/4″ CNC Shear is a powerful hydraulic shearing machine designed for precision cutting of mild steel up to 1/4″ thick. With a robust 15 HP motor and a 144″ blade length, this shear is well-suited for high-capacity metal fabrication environments. The system includes a front-operated 36″ power back gauge, adjustable rake, and power blade gap adjustment for enhanced control and cut quality. It features hydraulic hold-downs, ball transfers, and a squaring arm for smooth material handling, along with an electric foot pedal for hands-free operation. Additional blades are included, offering long-term value and reduced downtime.

CINCINNATI 1810G SHEAR USED 0

CINCINNATI 1810G SHEAR USED

$25,000.00

Availability:

Out of stock

SKU: IGAM1120001

The CINCINNATI 1810G Power Squaring Shears is a used industrial-grade hydraulic shear designed for high-precision sheet metal cutting. Built by one of the most respected names in metal fabrication, this machine offers robust capacity and reliable performance for high-throughput operations. The 1810G model is engineered to handle a variety of metal thicknesses with clean, accurate cuts, making it an excellent choice for fabrication shops, service centers, and OEM environments requiring consistent sheet processing.

CINCINNATI 3D10 HYDRAULIC POWER SQUARING SHEAR USED 0

CINCINNATI 3D10 HYDRAULIC POWER SQUARING SHEAR USED

$24,500.00

Availability:

Out of stock

SKU: IGAM2060001

The Used CINCINNATI 3D10 Hydraulic Power Squaring Shear is a rugged, high-capacity metal cutting solution engineered for industrial environments demanding precision and efficiency. Built by Cincinnati, a respected name in metal fabrication machinery, the 3D10 model offers dependable hydraulic power and accurate squaring for clean, consistent cuts in sheet metal. Designed for medium to heavy-duty operations, this used shear combines structural durability with reliable performance, making it a valuable addition to any fabrication shop or production floor.

DEVLIEG 3K-48 JIG BORING MILL 0

DEVLIEG 3K-48 JIG BORING MILL

$19,500.00

Availability:

Out of stock

SKU: IGAM2680001

This listing is for a USED DEVLIEG 3K-48 Jig Boring Mill. It is designed for precision boring and milling operations in industrial environments. This unit is categorized as a jig mill and includes the following capabilities: 3″ spindle hole diameter, 36″ vertical travel, and a 35″ x 48″ table size.

ROYSON CTT-15 Parts Tumbler USED 0

ROYSON CTT-15 Parts Tumbler USED

$18,500.00

Availability:

Out of stock

SKU: IGAM1810022

STANDARD AB200 BRAKE PRESS 0

STANDARD AB200 BRAKE PRESS

$17,500.00

Availability:

Out of stock

SKU: IGAM0480049

BUSHMAN COIL UPENDER PM: M9604 RATED CAPACITY 20,000 LBS USED 0

BUSHMAN COIL UPENDER PM: M9604 RATED CAPACITY 20,000 LBS USED

$17,500.00

Availability:

Out of stock

SKU: IGAM0910001

LOCKFORMER 14 STATION 0

LOCKFORMER 14 STATION

$17,250.00

Availability:

Out of stock

SKU: IGAM0480045

Capacity: 14 Station, 18 gauge

The machine produces a SMACNA standard T-25a flange. It uses 2.75” of material to produce. The duct wall thickness determines the pressure class rating and the addition of reinforcing rods, which are based on the SMACNA pressure calss charts as well.

As far as mm width of the flange, currently only used for DM35 for ducts requiring a loose flange/frame. A calliper measure was put on a flange off coil line and where it measured 36mm.

The 14 Station Lockformer is a used roll-forming machine designed to handle 18-gauge sheet metal with precision and efficiency. Ideal for HVAC fabrication and custom metal forming applications, this unit features 14 precision-ground stations to produce consistent profiles with minimal variation. With an estimated weight of 4,500 lbs and located in Akron, OH, it’s well-suited for heavy-duty shop environments that demand reliable forming capability.

AMADA HFB-8025 Hydraulic Press Brake 80T USED 0

AMADA HFB-8025 Hydraulic Press Brake 80T USED

$16,500.00

Availability:

Out of stock

SKU: IGAM2830001

ACCUPRESS 71008 PRESS BRAKE USED 0

ACCUPRESS 71008 PRESS BRAKE USED

$15,000.00

Availability:

Out of stock

SKU: IGAM2030001

CINCINNATI MILACRON ROTARY SURFACE GRINDER 261-16" 460V W/ NEUTROFIER III USED 0

CINCINNATI MILACRON ROTARY SURFACE GRINDER 261-16″ 460V W/ NEUTROFIER III USED

$15,000.00

Availability:

Out of stock

SKU: IGAM0740008

The Cincinnati Milacron Rotary Surface Grinder 261-16″ with Neutrofier III is a used horizontal spindle grinding machine engineered for accurate and efficient surface finishing across a range of materials. This unit is equipped with a 13-inch rotary magnetic chuck, a 14-inch grinding wheel, and the trusted Neutrofier III magnetic chuck controller. Operating at 460V, the 261-16″ delivers reliable performance in shops requiring precision and repeatability for medium-sized workpieces. Compact yet powerful, it fits seamlessly into toolrooms, maintenance areas, and production environments.

1" PINES MODEL #1 ROTARY HYDRAULIC BAR, TUBE & PIPE BENDER 0

1″ PINES MODEL #1 ROTARY HYDRAULIC BAR, TUBE & PIPE BENDER

$14,950.00

Availability:

Out of stock

SKU: IGAM1330002

10,000 LB X 48" GARY MODEL 4910-48 POWER UNCOILER 0

10,000 LB X 48″ GARY MODEL 4910-48 POWER UNCOILER

$14,500.00

Availability:

Out of stock

SKU: IGAM1070008

10,000 LB X 48" GARY MODEL #4910-48 POWER UNCOILER 0

10,000 LB X 48″ GARY MODEL #4910-48 POWER UNCOILER

$14,500.00

Availability:

Out of stock

SKU: IGAM1070005

PEDDINGHAUS 88/120 IRONWORKER USED 0

PEDDINGHAUS 88/120 IRONWORKER USED

$14,500.00

Availability:

Out of stock

SKU: IGAM1110002

48" X 7 ROLL GARY MODEL 4650-48 POWER STRAIGHTENER 0

48″ X 7 ROLL GARY MODEL 4650-48 POWER STRAIGHTENER

$12,950.00

Availability:

Out of stock

SKU: IGAM1070009

MITTS & MERRILL S-HFR-KS HYDRAULIC KEYSEATER 460V 3 PH USED 0

MITTS & MERRILL S-HFR-KS HYDRAULIC KEYSEATER 460V 3 PH USED

$12,500.00

Availability:

Out of stock

SKU: IGAM1820001

LAPMASTER 72 PRECISION SURFACING MACHINE USED 0

LAPMASTER 72 PRECISION SURFACING MACHINE USED

$12,000.00

Availability:

Out of stock

SKU: igam0101004

This listing is for a used Lapmaster Model 72 precision surfacing machine. It is designed for high-accuracy lapping and polishing of large workpieces. This unit is categorized as a precision lapping system and supports controlled material removal, flatness correction, and high-repeatability finishing.

TIMESAVER LYNX 37MWT-DBB-60 BELT SANDER 0

TIMESAVER LYNX 37MWT-DBB-60 BELT SANDER

$11,750.00

Availability:

Out of stock

SKU: IGAM0370001

The Used TIMESAVER LYNX 37MWT-DBB-60 Belt Sander is a high-capacity, wide belt sanding machine engineered for precision finishing in metalworking environments. Featuring a 37-inch width capacity, this model is equipped with multiple sanding heads including drum, brush, and combination belt heads, offering flexibility for deburring, finishing, and surface conditioning. Designed for demanding industrial use, the LYNX 37MWT-DBB-60 delivers consistent, high-quality results across a range of metal materials. Currently located in Pittsburgh, PA, this used machine presents a great opportunity for shops seeking top-tier performance and reliability without the cost of a new unit.

KOMATSU OBS 35-3B GAP FRAME (OBS) PRESSES USED 0

KOMATSU OBS 35-3B GAP FRAME (OBS) PRESSES USED

$11,500.00

Availability:

Out of stock

SKU: IGAM2790001

For sale is a used Komatsu OBS 35-3B Gap Frame (OBS) Press, known for its reliability, precision, and durability. While this unit is pre-owned, it has been well-maintained and is in excellent working condition, performing well above average for a used machine of its class. Perfect for stamping, punching, or forming operations.

Key Specs:
Capacity: 35 Tons

Stroke: 3.15″ (≈ 80 mm)

Shut Height (SDAU): 8.25″ (≈ 210 mm)

Slide / Ram Adjustment: 2.17″ (≈ 55 mm)

Ram Face Area: 13.75″ L‑R × 11.81″ F‑B (≈ 350 × 300 mm)

Bed Size: 27.55″ L‑R × 15.75″ F‑B (≈ 700 × 400 mm)

Bolster Thickness / Plate: ~3.39″ (≈ 86 mm)

Speed (SPM): Up to ~100 SPM

Counterbalance: Air counterbalance on slide

Overload Protection: Hydraulic ram overload protection

Weight (approx): 6,000 LBS

HARDINGE HLV‑H Super Precision Lathe 11" x 18" USED 0

HARDINGE HLV‑H Super Precision Lathe 11″ x 18″ USED

$10,000.00

Availability:

Out of stock

SKU: IGAM2880020

This listing is for a USED Hardinge HLV‑H Super Precision Lathe featuring an approximate 11-inch swing and 18-inch between centers. The Hardinge HLV‑H is one of the most respected precision toolroom lathes used for fine turning, threading, toolmaking, and precision component manufacturing. This unit includes a 1.5 HP spindle motor, variable‑speed capability, precision carriage movement, and an integrated DRO system for improved accuracy. The HLV‑H design is widely used in aerospace, R&D labs, machine shops, and manufacturing environments requiring tight tolerances and repeatable performance.

Hammond Roto‑Finish Vortex 12 Vibratory Finishing Machine USED 0

Hammond Roto‑Finish Vortex 12 Vibratory Finishing Machine USED

$9,500.00

Availability:

Out of stock

SKU: IGAM0530028

This listing is for a USED Hammond Roto‑Finish Vortex 12 vibratory finishing machine. The unit is a bowl‑style finishing system designed for deburring, surface finishing, and parts conditioning in industrial manufacturing environments. It features a circular finishing bowl with internal separation and a fixed base-mounted drive system.

HARDINGE HLV‑H Super Precision Lathe 11" x 18" USED 0

HARDINGE HLV‑H Super Precision Lathe 11″ x 18″ USED

$9,500.00

Availability:

Out of stock

SKU: IGAM2880009

This listing is for a USED Hardinge HLV‑H Super Precision Lathe with an approximate 11‑inch swing and 18‑inch distance between centers. The HLV‑H is well‑known in the machining industry for its accuracy, smooth spindle operation, and precise threading capabilities. This model includes a 1.0 HP spindle motor, 460V 3‑phase input, and 115V control circuitry. It is commonly used in toolrooms, R&D environments, and precision part manufacturing where tight tolerances and reliable performance are required.