New Arrivals

This listing is for a NEW HARTING 19300061440. It is designed for use in industrial connector assemblies. This unit is categorized as a connector hood and includes the Han 6B-HTE-M20 housing, M20 cable entry configuration, and original manufacturer packaging.

This listing is for a NEW Siemens 8WA1-808. It is designed for securing and retaining terminal blocks on mounting rails in electrical control and distribution applications. This unit is categorized as a terminal block accessory and includes a plastic end retainer design, 10 mm width, and a package quantity of 50 pieces as marked on the manufacturer packaging.

This listing is for a NEW SMC AR60K-N10-Z-B. The regulator maintains stable downstream air pressure in pneumatic systems while allowing adjustment through a locking control knob. A built-in analog gauge provides visual pressure indication, and the 1 inch NPT port configuration supports medium to high flow installations commonly found in industrial air preparation setups.

This listing is for a NEW Banner Engineering SMBAMS22RLS (Part Number 18685). It is designed as a right-angle mounting bracket for industrial sensors, allowing secure installation and precise positioning in automation systems. This unit is categorized as a sensor mounting accessory and includes a durable metal construction, adjustable mounting configuration, and hardware for easy installation in industrial environments.

This listing is for a NEW ASCO Numatics M8MN 1-1/2″ NPT. It is designed for reducing exhaust noise and diffusing compressed air discharge in large pneumatic systems. This unit is categorized as a pneumatic exhaust silencer muffler and includes the following capabilities 1-1/2 inch NPT male threaded connection high flow capacity perforated metal diffusion body and rugged corrosion-resistant construction for industrial environments.

This listing is for a NEW ASCO Numatics M4MN pneumatic exhaust silencer muffler. It is designed for reducing noise and diffusing exhaust air in pneumatic systems such as valves, cylinders, and compressed air equipment. This unit is categorized as a pneumatic silencer and includes the following capabilities 1/2 inch NPT male threaded connection, durable metal body construction, and high-pressure performance suitable for industrial air exhaust applications.

This listing is for a NEW ASCO Numatics M3MB pneumatic exhaust silencer muffler. It is designed for reducing noise and controlling exhaust air flow in pneumatic systems such as valves, cylinders, and compressed air equipment. This unit is categorized as a pneumatic silencer and includes the following capabilities 3/8 inch BSPT male threaded connection, corrosion-resistant metal construction, and high-pressure performance up to approximately 14 bar for reliable industrial use.

This listing is for a NEW Haffner MAC440-30 + TA144 Aluminum Profile CNC Machining & Automatic Cutting Cell. This integrated manufacturing cell combines a 4-axis aluminum profile processing center with an automatic aluminum cleat cutting saw, providing automated milling, drilling, cutting, tapping, flow drilling, countersinking, and precision sawing operations for aluminum profile fabrication. Key capabilities include 4-axis CNC machining, automatic tool changing, programmable cutting lists, CNC controls, automated profile handling, and high-speed aluminum processing.

This listing is for a NEW Banner Engineering EZLSA-MBK-16 (Part Number 88559). It is designed as a side mounting solution for EZ-SCREEN LS safety light curtain systems, allowing precise positioning and secure installation. This unit is categorized as a mounting bracket and includes adjustable rotation capability, durable black zinc die-cast construction, and complete mounting hardware for industrial safety applications.

This listing is for a NEW Omni Cable L710ST-07. The 10 AWG flexible stranded tinned-copper MTW wire provides insulated power and control wiring for industrial machinery and electrical equipment, with PVC insulation, orange coloring with a black stripe, and a 600 V / 1000 V rating.

This listing is for a NEW Omni Cable L712ST-02. The 12 AWG stranded tinned-copper wire provides insulated electrical wiring for industrial equipment, machine controls, and electrical systems, with PVC insulation, white coloring with an orange stripe, and a 600 V / 1000 V rating.

This listing is for a NEW Omni Cable L714ST-02. The 14 AWG stranded tinned-copper wire provides insulated electrical wiring for industrial equipment, machinery, and control applications, with PVC insulation, white coloring with an orange stripe, and a 600 V / 1000 V rating.

This listing is for a NEW Kistler 1200A49A3. The 0.5 m Category 6e S/UTP patch cable provides RJ45 Ethernet connectivity for compatible networked equipment, using a blue flexible PVC cable with molded connectors and latch protection.

This listing is for a NEW 500-foot reel of Omni Cable L716ST-05. The 16 AWG stranded tinned-copper wire provides insulated electrical wiring for industrial equipment, control, and machine applications, with blue PVC insulation, an orange stripe, and a 600 V / 1000 V rating.

This listing is for a NEW Banner Engineering DELSE-81D connecting cable, part number 86942. It is designed for industrial automation and machine safety applications, commonly used with Banner EZ-SCREEN light curtain systems and similar devices. This unit is categorized as a double-ended cordset and includes the following capabilities 12-pin LS female to 8-pin M12 male connectivity, approximately 0.3 meter cable length, and durable yellow PVC jacket construction with IP67 environmental protection for reliable operation in harsh industrial environments.

This listing is for a NEW Banner Engineering CSB-M1251M1251 (Part Number 93317). It is designed for industrial connectivity applications where a single M12 connection must be split into two outputs, commonly used in sensor and automation systems. This unit is categorized as a splitter cable and includes capabilities such as a 5-pin M12 male trunk connection, dual 5-pin M12 female branch connectors, and a durable PVC jacket with IP67 environmental protection.

This listing is for a NEW Balluff BCC W415-W414-3A-304-SW0434-050 connecting cable. It is designed for industrial automation applications where reliable signal and power transmission between M12 devices is required. This unit is categorized as a double-ended cordset and includes a 5-pin M12 female connector, 4-pin M12 male connector, 5 meter silicone welding-resistant cable, and 250V AC/DC rating with 4A current capacity.

This listing is for a NEW Banner Engineering CSB-M12825M1281 (Part Number 73255). It is designed for industrial automation applications where a single M12 connection must be split to multiple devices. This unit is categorized as a splitter cable and includes an 8-pin M12 connection system, durable PVC jacket, and molded industrial connectors built for reliable signal and power distribution in factory environments.

This listing is for a NEW Banner Engineering DEE2R-525D connecting cable, part number 72336. It is designed for industrial automation and sensor connectivity, commonly used with machine safety and sensing equipment. This unit is categorized as a double-ended cordset cable and includes the following capabilities M12 5-pin male to 5-pin female connectors, extended cable length for flexible installations, and durable yellow PVC jacket construction for industrial environments.

This listing is for a NEW Balluff BCC W414-W415-W415-U2046-003 splitter cable, also identified by part number BCC0EHM. It is designed for industrial automation connectivity, allowing a single M12 connection to split into two outputs for multiple sensors or devices. This unit is categorized as a Y-splitter cordset and includes the following capabilities M12 4-pin male to dual M12 5-pin female connections, 0.3 meter silicone cable length, and IP67 rated protection for harsh industrial environments with a 4 amp current rating and 250V AC/DC operating capacity.

This listing is for a NEW NO BOX Banner Engineering DELS-113E, part number 86945. It is designed for industrial automation and machine safety connectivity, commonly used with light curtain and sensor systems. This unit is categorized as a double-ended cordset cable and includes the following capabilities 12-pin LS female connectors on both ends, 1 meter cable length, and durable yellow PVC jacket construction for industrial environments with IP67 protection rating.

This listing is for a NEW NO BOX Balluff BCC W415-W414-3A-304-SW0434-010 connecting cable, also identified as BCC0ELZ. It is designed for industrial automation connectivity, providing reliable signal and power transmission between sensors, actuators, and control systems. This unit is categorized as a double-ended M12 cordset and includes the following capabilities M12 female to M12 male connectivity, 5-pin to 4-pin configuration, 1 meter cable length, and IP65 rated protection for industrial environments.

This listing is for a NEW NO BOX Balluff BCC W425-W414-3A-304-SW0434-010 connecting cable, also identified as BCC0EU9. It is designed for industrial automation connectivity, providing reliable signal and power transmission between sensors, actuators, and control systems. This unit is categorized as a double-ended M12 cordset and includes the following capabilities M12 female to M12 male connectivity, straight and right-angle connector configuration, 5-pin to 4-pin interface, and approximately 1 meter cable length with industrial-grade protection and durability for harsh environments.

This listing is for a NEW Balluff BCC W415-W414-3A-304-SW0434-020 connecting cable, BCC0EM1. It is designed for industrial automation and welding applications, providing reliable signal and power transmission between sensors, actuators, and control systems. This double-ended M12 cordset includes the following capabilities: M12 5-pin female to 4-pin male connectivity, 2 meter cable length, and high-temperature silicone jacket with IP65 protection designed for harsh industrial environments.