New Arrivals

This listing is for a NEW BALLUFF BAM0032. It is designed for mounting M18 sensors within Balluff mounting systems. This unit is categorized as a Sensor Mount and includes a stainless steel mounting bracket, clamp-style mounting arrangement, and BMS CS-M-D12-ID18-01 designation.

This listing is for a lot of 8 NEW Parker XV502SS-8 ball valves. These 1/2-inch stainless-steel valves provide manual quarter-turn shutoff for compatible fluid or gas lines and carry a 2000 WOG body rating. Each valve uses a lever-operated two-way configuration.

This listing is for a USED Sixnet EB-PSE-24V-1B. It is designed to provide Power over Ethernet (PoE) capability for industrial networking applications. This unit is categorized as an Industrial PoE Power Injector and includes dual RJ45 Ethernet ports, a 18-30 VDC input range, and DIN rail mounting capability.

This listing is for a NEW Allen-Bradley 802T-W3B Series B operating lever. The long rod-style lever transfers mechanical movement to a compatible 802T limit switch head for position, travel, and machine-motion detection. Its adjustable hub allows the operator position to be set for the intended mechanical actuation point.

This listing is for a NEW BANNER OS80K2LX3XR1MQP. It is designed for industrial operator control and machine interface applications using a key-operated selector switch. This unit is categorized as a key-operated industrial switch and includes a 2-position On-Off function, 12-30 VDC operation, and a 5-pin M12 PVC pigtail quick-disconnect connection.

This listing is for a USED Allen Bradley 1734-TOPS. It is designed for use as a POINT I/O terminal base in industrial automation systems. This unit is categorized as an I/O module component and includes Cat. No. 1734-TOPS, Series A, and factory-installed wiring leads.

This listing is for a USED Allen Bradley 1734-TOP3S. It is designed for use as a POINT I/O terminal base in industrial automation systems. This unit is categorized as an I/O module and includes Part Number 1734-TOP3S, Series A, and a 12-point terminal configuration

This listing is for a NEW Apollo Valves 70-103-01 bronze ball valve. It is designed for shutoff and flow control in commercial, mechanical, and industrial piping systems. This unit is part of the Apollo 70-100 Series, a line of full-port bronze ball valves with NPT threaded ends and a manual lever handle. The 70-103-01 is suitable for general water, oil, gas, and non-corrosive fluid service.

This listing is for a NEW Apollo Valves 75-107-41 bronze ball valve. The 75-100 Series is designed for general-purpose shutoff service in commercial, industrial, and mechanical systems. This valve is a full-port, two-piece bronze ball valve equipped with NPT threaded ends and a lever handle for manual operation. It is suitable for a wide range of media including water, oil, gas, and non-corrosive fluids.

This listing is for a NEW SMC VQ4000-PW-DAK00314. The assembly serves as a sub-base manifold for mounting and distributing multiple pneumatic valves, allowing centralized supply and exhaust routing across a compact footprint. Configuration includes a 3-station layout with integrated porting and electrical pin interface, supporting modular installation within VQ4000 series valve systems.

This listing is for a NEW Parker SH4-62 supplied as a pack of four. It provides a quick-connect interface for hydraulic lines, allowing rapid coupling and disconnection while maintaining a sealed flow path. This configuration is used in fluid power systems where ISO 7241 interchange geometry and repeated connection cycles are required.

This listing is for a NEW SMC VQC5401-51 solenoid valve. The VQC5400-series valves belong to SMC’s VQC5000 family, designed for high-flow pneumatic switching in industrial automation systems. This model is a 5-port solenoid-operated directional valve suitable for manifold-mounted installations and automated machinery. The “-51” suffix is not published in SMC documentation and therefore cannot be expanded.

This listing is for a NEW SMC VS8-3-A06-X11-XG. This unit provides a pneumatic sub-base mounting interface for ISO-style valve systems, supporting centralized air distribution with G3/4 port connections and multi-pin electrical interfacing for integration into industrial automation valve assemblies.

This listing is for a NEW Banner Engineering K30APPBMBXDQP-20619. It is designed as an illuminated indicator pushbutton used for machine status signaling and operator input. This unit is categorized as an industrial LED operator device and includes capabilities typical of the K30 family such as compact panel mounting, bright LED indication, and a sealed housing suited for industrial environments.

This listing is for a NEW BANNER B-TL70-Q5. This base module provides the electrical interface and mounting foundation for TL70 tower light systems, supporting quick-disconnect connectivity and modular stack light configuration in industrial signaling applications.

This listing is for a NEW Allen Bradley 440E-D2NNNYS. It is designed for emergency stop and machine safeguarding applications using a rope pull system. This unit is categorized as a Safety Switch and includes the Guardmaster Lifeline 3 series designation, rope pull switch configuration, and original manufacturer packaging.

This listing is for a NEW Parker 6-2F4OMXS-A male straight adapter fitting. It is designed for connecting hydraulic tubing systems using a 3/8 inch JIC 37 degree flare connection to a 1/8 inch BSPP male O-ring retaining ring port. This unit is categorized as a hydraulic adapter fitting and includes capabilities such as high-pressure sealing up to approximately 5000 psi, durable steel body construction, and reliable leak-free metal-to-metal sealing performance for demanding fluid and gas applications.

This listing is for a NEW Parker B22 quick-disconnect coupling. It is designed for rapid connection and disconnection of pneumatic air lines in industrial environments. This unit is categorized as a brass air-line coupler and includes a 1/4 inch female quick-disconnect interface and a 1/4 inch male NPT threaded end.

This listing is for a NEW Parker BH6-60. This brass quick coupler provides a detachable connection point for compatible fluid or pneumatic lines and incorporates a 3/4″ female NPT connection for installation into associated piping, hose, or equipment connections.

This listing is for a NEW 4-Pack of Parker SH4-63 hydraulic quick couplings. These stainless-steel manual-connect couplers feature a 1/2 inch male nipple x 1/2 inch female NPTF connection. Designed for general-purpose hydraulic applications, they meet ISO 7241-1 Series B specifications and support up to 5000 PSI operating pressure. These units also include a nitrile-sealed poppet valve and 303 stainless-steel construction for enhanced durability.

This listing is for a NEW Parker BH6-61 hydraulic quick connect nipple. It is part of Parker’s BH-Series ISO 7241-A interchange hydraulic couplings and features a 3/4 inch nipple body with a 3/4 inch FNPT threaded connection. This style is widely used in hydraulic systems for industrial machinery, mobile equipment, and general fluid service requiring reliable quick disconnect performance.

This listing is for a NEW Parker SH3-62 hydraulic quick coupler. It belongs to Parker’s SH-Series ISO 7241-A interchange and features a 3/8 inch coupler body with a 3/8 inch FNPT threaded port. This style of coupler is used for hydraulic line connection and disconnection in mobile and industrial machinery, offering compatibility with industry-standard ISO-A hydraulic fittings.

This listing is for a NEW Parker SH3-63. It provides a threaded hydraulic connection point for joining hose assemblies to equipment or piping, supporting fluid transfer in hydraulic and industrial systems. Commonly used where secure 3/8 inch NPT connections are required for pressure-rated fluid handling.

This listing is for a New Banner SMB30MM. It is designed for securely mounting 30mm cylindrical sensors in industrial automation and sensing applications. This unit is categorized as a sensor mounting bracket and includes the following capabilities 30mm sensor compatibility, adjustable slotted mounting holes, and durable stainless steel construction for long-term use in industrial environments.