New Arrivals

This listing is for a NEW Graco LC0059. The component serves as a mixer shroud used with Graco fluid mixing equipment utilizing a 3/8-36 connection and 10 mixer configuration. Intended for use in dispensing, mixing, and material application systems.

This listing is for a NEW Festo ADN-20-120-I-P-A-52. The ADN series compact cylinder provides linear pneumatic motion for positioning, transfer, clamping, and machine actuation tasks. This configuration features a 20 mm bore, 120 mm stroke, and is intended for integration into automation equipment and industrial machinery.

This listing is for a NEW Icom CP-23L. The cable provides DC power connection through a vehicle cigarette lighter socket for compatible Icom communication equipment and accessories requiring a 12 VDC power source.

This listing is for a NEW Hersey Clutch Co. 125 DC 3/4″ x 3/4″ overload clutch. The unit is intended for torque limiting and overload protection in mechanical power transmission systems where protection against excessive loading is required.

This listing is for a NEW THK HSR15B1SS(GK). The HSR series linear guide block is used in linear motion systems requiring guided travel, positioning accuracy, and load support along a compatible guide rail. Suitable for automation equipment, machinery, semiconductor equipment, and motion control applications.

This listing is for a NEW Cooper Bussmann LPS-RK-350SP. The LOW-PEAK series fuse is intended for branch circuit, feeder, and service entrance protection in industrial and commercial electrical distribution systems. The unit provides overcurrent protection for circuits and equipment requiring a Class RK1 fuse.

This listing is for a NEW SMC MXS16-40. The MXS series combines linear motion guidance and pneumatic actuation in a compact slide table configuration used for positioning, transfer, and indexing applications in automated equipment and machinery.

This listing is for a USED Rollon LTH450600RF linear guide rail. The rail provides linear motion guidance for positioning, transfer, and automation applications where controlled travel along a fixed path is required. Suitable for integration into industrial machinery, automated equipment, and material handling systems.

This listing is for a NEW SMC MHZ2-40D. The MHZ2 series provides pneumatic two-finger parallel gripping for automated handling, part transfer, positioning, and end-of-arm tooling applications. Featuring a compact body design and synchronized jaw motion, this gripper is commonly integrated into robotic and automated manufacturing systems.

2007 Citizen Cincom A20
Fanuc Control
Capture Length: 3.14″
Max Turning Length: 6.49″
Coolant Tank
Driven Tool 8000 rpm
Edge C-320 Bar Feeder
Cool Blaster Mist Control 850

1996 OKUMA MC-40VB Used as-is.
OSP 7000M Controller
480V 30 KVA step down transformer
Coolant tank

This listing is for a USED Allen-Bradley 855E-BPM25 panel mount beacon. The 855E series provides visual signaling for machine status indication, alarm notification, and process monitoring applications. This unit features a panel-mounted configuration, 12-48V AC/DC operating range, and LED illumination for industrial signaling and operator notification systems.

This listing is for a USED DoAll 3612-1H Vertical Contour Bandsaw. Configured for contour cutting, shape cutting, and general-purpose sawing operations, the machine utilizes a vertically oriented band saw blade with integrated work table support. The 3612-1H platform is suited for toolrooms, fabrication departments, maintenance facilities, and production environments requiring controlled cutting of metal and other machinable materials.

This listing is for a USED Minuteman MC260026 260 Scrubber. Designed for hard floor cleaning operations, the machine combines solution application, brush scrubbing, and recovery functions in a battery-powered walk-behind platform. Included with the unit is a compatible battery charger for charging the onboard battery system used in commercial, industrial, and facility maintenance environments.

This listing is for a NEW SKF 1AD01 Separator Filter Dryer Cartridge Kit. Intended for SKF compressed air treatment systems, the kit contains replacement service cartridges used to remove moisture and contaminants from compressed air circuits. The included service components support air quality maintenance and protection of downstream pneumatic equipment and processes.

This listing is for a NEW FANUC A660-2004-T840#L20R03. Configured as a 20 meter teach pendant interface cable, this component provides the connection between compatible FANUC robotic control hardware and teach pendant devices. The extended cable length supports robotic workcells, automation systems, and manufacturing environments requiring remote operator interface connectivity.

This listing is for a NEW Saginaw Control & Engineering SA310IJD Adjustable Interlocking Joint. Intended for enclosure-to-enclosure connections, this accessory provides a protected transition path between adjoining electrical enclosures while accommodating relative movement between enclosure sections. Suitable for industrial control panels, automation equipment, and electrical cabinet installations.

This listing is for a USED Granite Surface Plate measuring 48″ x 48″ x 9″. The granite work surface provides a stable reference plane for dimensional inspection, layout work, gaging, and measurement tasks. Included with the plate is a matching steel rolling stand, making the unit suitable for quality control, metrology, toolroom, and manufacturing environments.

This listing is for a USED Starrett 88629 Grade AA Granite Surface Plate. Manufactured from precision granite, this inspection surface provides a stable reference plane for dimensional measurement, layout work, gaging, and quality control applications. Grade AA laboratory accuracy makes it suitable for metrology, toolroom, inspection, and calibration environments.

This listing is for a NEW Chroma 17020 Regenerative Battery Pack Test System. Developed for battery module and battery pack charge, discharge, cycling, validation, and qualification testing, this configuration incorporates regenerative energy recovery, independent test channels, integrated battery resistance measurement equipment, automated switching hardware, and industrial computer control within a rack-mounted platform. The installed hardware is suited for battery development, production testing, reliability evaluation, and energy storage applications.

This listing is for a USED Chroma 17020 Regenerative Battery Pack Test System. Developed for battery module and battery pack charge, discharge, cycling, validation, and qualification testing, the platform incorporates regenerative energy recovery technology, independent test channels, and integrated control hardware for laboratory, engineering, and production environments.

This listing is for a NEW Automation Guarding Systems A19461 RH H.G. Slide Bolt Auto-Loc Handle. Engineered for safeguarding access points on industrial equipment, this mechanical locking device incorporates a slide bolt mechanism, handle-operated engagement, and mounting hardware for machine guard and safety gate installations.

This listing is for a NEW Automation Guarding Systems A19462 LH H.G. Slide Bolt Auto-Loc Handle. Intended for guard door and machine safety gate installations requiring a mechanically retained slide bolt locking arrangement with handle-operated actuation.

This listing is for a NEW FANUC A06B-6107-H002 servo amplifier. The A06B-6107-H002 is a 6-channel AC servo amplifier designed for FANUC CNC and motion control systems. This unit provides multi-axis servo drive capability for machine tools, industrial automation systems, and motion control applications.