New Arrivals

This listing is for a USED ABB Robotics 3HAC3403-1 servo motor. The PS 90/6-57-P-LSS-4145 is a robotic servo motor designed for ABB industrial robot applications requiring precise motion and positional control. This unit includes an integrated Tamagawa Seiki BRX Smartsyn feedback device, attached power and feedback wiring, and mounting flange assembly for ABB robotic systems.

This listing is for a NEW Tri-Dim TD75R10HCA hydraulic filter element. The TD75R10HCA is designed for hydraulic fluid filtration applications in industrial machinery, hydraulic power units, manufacturing equipment, and fluid power systems. This replacement filter element features a pleated media design, metal end caps, and high-surface-area construction for hydraulic system contamination control.

This listing is for a USED Omron P7SA-14F relay socket. The P7SA series is designed for use with Omron safety relays and plug-in relays, providing secure relay mounting and field wiring termination in industrial control panels, machine safety systems, and automation equipment. This socket features 14 terminals, DIN rail mounting capability, and supports relay applications up to 6A per pole.

This listing is for a USED Omron G7SA-5A1B safety relay. The G7SA series is designed for safety circuit monitoring and machine safety applications in industrial automation systems. This relay features a 24 VDC coil, forcibly guided contacts, 4 normally open safety contacts, 1 normally closed auxiliary contact, and plug-in PCB mounting construction for integration into safety control systems.

This listing is for a NEW Allen-Bradley 1762-OW16 MicroLogix expansion I/O module. The 1762-OW16 is designed for use with MicroLogix control systems and provides 16 relay output points for industrial automation, machine control, OEM equipment, and manufacturing applications. This module features VAC/VDC relay outputs, compact DIN rail mounting, and compatibility with the Allen-Bradley 1762 expansion platform.

This listing is for a USED Buffalo B-6CB bench grinder mounted on a floor stand. The B-6CB is a heavy-duty ball bearing bench grinder designed for grinding, deburring, polishing, sharpening, and general shop maintenance applications. This unit features a 1/2 HP motor, 6-inch wheel capacity, 3450 RPM operating speed, and 110V single-phase operation.

This listing is for a USED FANUC M-16iB/20 robot complete with an R-J3iB controller and teach pendant. The M-16iB/20 is a 6-axis industrial robot designed for material handling, machine tending, assembly, packaging, and automated manufacturing applications. This package includes the robot, R-J3iB controller, teach pendant, mounted end-of-arm tooling, and associated cabling.

This listing is for a USED Rodix 121-8640 vibratory bowl feeder system. The unit consists of a vibratory bowl feeder, bulk hopper, sound-reduction enclosure, and Rodix Plus Series feeder controller. The system is designed for automated parts feeding, orientation, singulation, and delivery applications in industrial automation and assembly environments.

This listing is for a USED 6 in x 48 in belt and 9 in disc sander with stand. The machine is designed for sanding, deburring, shaping, edge finishing, and general shop fabrication applications. This unit features a 6-inch by 48-inch belt sanding section, 9-inch disc sanding station, adjustable work table, floor stand, and single-phase electric motor drive for finishing and material removal operations.

This listing is for a USED Miller Millermatic 250 MIG welder with Miller S-22A wire feeder. The Millermatic 250 is a CV-DC arc welding power source with integrated wire feed capability designed for production welding, fabrication, maintenance, and manufacturing applications. This package includes the Millermatic 250 power source, S-22A wire feeder, welding gun, interconnecting cables, and rolling cart.

This listing is for a USED Numatics R503 Series pneumatic valve manifold assembly. The unit consists of two R503 Series directional control valves mounted on a modular manifold with integrated 25-pin D-sub electrical interface and pneumatic distribution system. This assembly is designed for centralized pneumatic control of actuators and machine functions in industrial automation, assembly equipment, and material handling systems.

This listing is for a NEW Vickers CG 06 F 50 relief valve. The CG series is designed for hydraulic pressure control applications where system pressure must be limited and maintained within a specified operating range. This unit features an adjustable pressure setting, subplate mounting configuration, and a pressure range of 1500 to 3000 PSI for industrial hydraulic systems, power units, and machine control applications.

This listing is for a NEW Gates 78596555 Taper-Lock bushing. The 78596555 is a 3020-series Taper-Lock bushing designed for mounting pulleys, sheaves, sprockets, and power transmission components to keyed shafts. This unit features a 55 mm bore size and split-taper construction for secure shaft mounting and simplified installation and removal in industrial power transmission systems.

This listing is for a NEW SMC MHZ2-40D parallel air gripper. The MHZ2 series is designed for workpiece gripping, transfer, and handling operations in industrial automation, assembly systems, robotics, and material handling equipment. This unit features a 40 mm bore size and parallel jaw operation for precision gripping applications.

This listing is for a NEW Cleco 543598 Lamp Replacement Kit. The 543598 kit is designed for replacement of the LCD display lamp assembly used in Cleco TME Series tightening controllers. This service kit is intended for maintenance and repair of Cleco fastening control systems and includes the components required for LCD display illumination replacement.

This listing is for a NEW Allen-Bradley 800T-H2D1 selector switch. The 800T series is designed for heavy-duty industrial control panel applications requiring durable operator interface devices. This 30 mm selector switch features a 2-position maintained operation, non-illuminated standard knob with white insert, and includes one normally open contact for machine control and automation systems.

This listing is for a USED ABB 3HAB 2214-8/4 digital signal board. The 3HAB 2214-8/4 is an ABB industrial electronics circuit board used in robotic and automation control systems. This board provides digital signal processing and interface functions and is equipped with multiple edge connectors, signal interface components, relays, and integrated circuitry for ABB automation equipment.

This listing is for a NEW SMC CKZT40TN-135T power clamp cylinder. The CKZT series is designed for workpiece clamping and holding applications in automated manufacturing, welding fixtures, assembly equipment, and industrial automation systems. This unit features a 40 mm bore size and 135° clamp arm rotation configuration for pneumatic clamping operations.

This listing is for a USED Flex-Cable FC-D258BASE-11122-H012 DeviceNet adapter cable. The cable assembly is designed for industrial automation and fieldbus communication applications requiring connection between DeviceNet-compatible equipment and control devices. This factory-assembled cable features a mini-style circular connector, DeviceNet adapter connector, and 12-inch cable length.

This listing is for a NEW SMC CKZ-63A024 cylinder mounting bracket. The CKZ-63A024 is a heavy-duty clevis-style mounting accessory designed for use with compatible SMC pneumatic cylinder assemblies. This component provides a pivoting mounting point for cylinder installation in industrial automation, machinery, and pneumatic motion control applications.

This listing is for a USED Parker Watts R119-04JX71 pneumatic pressure regulator. The R119 series is designed to regulate and maintain downstream pressure in compressed air systems, machine automation equipment, and industrial pneumatic applications. This unit features a 300 PSI maximum operating pressure, 125°F maximum temperature rating, diaphragm-operated construction, and threaded process connections for industrial air regulation service.

This listing is for a USED Trinco BP2 dry blast dust collector. The BP2 is designed for use with dry blast and abrasive blasting equipment to capture dust and airborne particulate generated during blasting operations. This unit features a cylindrical dust collection housing, replaceable filter bag system, blower assembly, and side collection port for industrial dust extraction applications.

This listing is for a USED RIDGID 500 pipe threading machine with integrated stand. The RIDGID 500 is a heavy-duty pipe fabrication and threading machine designed for threading, cutting, reaming, and pipe preparation operations in industrial, commercial, and plumbing applications. This unit includes the threading carriage, chuck assembly, pipe support system, and wheeled stand.

This listing is for a USED MKS 260PS-1 power supply. The 260PS-1 is a rack-mount power supply designed for use with MKS Instruments vacuum and process control equipment. This unit features selectable AC input operation, front-panel power control, and dual ±15V status indicators for supporting compatible MKS instrumentation systems.