New Arrivals

This listing is for a USED Siemens 6ES7 131-4BD01-0AB0. This interface module provides four digital input channels operating at 24V DC for integration into SIMATIC ET200S distributed I/O systems and supports field signal acquisition in industrial automation environments using modular PLC-based architectures.

This listing is for a NEW Hubbell HBL460MI7W Circuit-Lock mechanical interlock receptacle. This unit provides secure power connection and disconnection with an integrated interlock mechanism that prevents engagement or disengagement under load and operates at 60 amps with 480V AC three-phase capability in a 3 pole, 4 wire configuration for industrial power distribution applications.

This listing is for a NEW Mersen AJT100 Amp-Trap 2000 Class J fuse. This unit provides overcurrent protection using a dual-element time-delay design and is rated at 100 amps with 600V AC and 400V DC capability, supporting industrial motor circuits and electrical distribution systems where current-limiting protection is required.

This listing is for a NEW Mersen AJT45 Amp-Trap 2000 Class J fuse. This unit provides overcurrent protection using a dual-element time-delay design and is rated at 45 amps with 600V AC and 400V DC capability, supporting motor circuits and industrial electrical systems requiring current-limiting protection and reliable fault interruption.

This listing is for a NEW Mersen AJT30 Amp-Trap 2000 Class J fuse. This unit provides overcurrent protection using a dual-element time-delay design and is rated at 30 amps with 600V AC / 400V DC capability, supporting industrial motor circuits and electrical distribution systems requiring current-limiting protection.

This listing is for a NEW Mersen AJT10 Amp-Trap 2000 Class J fuse. This unit provides overcurrent protection in electrical circuits using a dual-element time-delay design, rated at 10 amps and suitable for 600V AC and 400V DC applications with current-limiting performance for industrial equipment and motor circuits.

This listing is for a NEW Emerson Appleton ACP3034BC Powertite plug. This unit connects portable or fixed electrical equipment to power systems using a clamping ring configuration and 3-wire, 4-pole contact arrangement, supporting 30 amp service in industrial environments requiring secure, weather-resistant connections.

This listing is for a NEW Schneider Electric VC1GUN emergency stop / main switch assembly. This unit provides manual isolation and emergency shutdown capability within industrial electrical systems and is housed in an IP55 rated enclosure for protection against dust and water ingress in industrial and commercial applications.

This listing is for a Used Lincoln Torchmate X CNC Plasma Cutting Table with FlexCut 125. It is designed for automated plasma cutting of metal materials using CNC motion control. This unit is categorized as a CNC plasma cutting system and includes capabilities such as precision gantry-based cutting, integration with Lincoln Electric FlexCut 125 plasma power source, and compatibility with Torchmate CNC control software.

Location: Alto, MI

This listing is for a NEW Mersen AJT100N Amp-Trap 2000 Class J fuse. This dual-element time-delay fuse provides overcurrent protection for industrial electrical circuits and is rated at 100 amps with 600V AC / 400V DC capability and high interrupting rating performance for motor protection and distribution systems.

This listing is for a NEW Gems 22445 SPST liquid level switch. This unit provides level detection in tanks and reservoirs using a float-based switching mechanism and supports up to 250VAC operation with a simple on/off contact for industrial liquid level monitoring applications.

This listing is for a USED Siemens 6ES7 151-1AB00-0AB0. This interface module provides communication between ET 200S distributed I/O stations and higher-level automation systems within SIMATIC S7 environments, supporting PROFIBUS DP connectivity and modular I/O expansion in industrial automation applications.

This listing is for a USED Miller Pulstar 450 with Miller S-60 wire feeder. This system provides constant potential pulsed DC welding output paired with a remote wire feeder for controlled MIG welding processes and operates as a heavy industrial platform for high-current welding applications in fabrication and production environments.

This listing is for a USED Una-Dyn US15-15504 5HP vacuum pump system with hopper assembly. This system provides centralized vacuum conveying for plastic resin handling using a 5 horsepower vacuum pump operating on 460V three-phase power at 60 Hz, moving material through connected lines into a hopper vessel for processing system integration in industrial environments.

This listing is for a NEW Square D 9007B064B2 heavy duty position switch. This device provides mechanical position sensing for industrial machinery, enabling detection of motion or end-of-travel conditions within control systems, and is part of the Square D 9007 heavy duty limit switch family designed for rugged applications.

This listing is for a NEW Square D 9007CO68T10. This limit switch provides mechanical position sensing for industrial machinery and control systems, enabling precise detection of motion or position within automated equipment using a contact-based switching mechanism.

This listing is for a NEW Banner PBAQ. This power block provides operating power and interface connection for compatible Banner emitter scanner blocks and features a quick-disconnect configuration for simplified system integration in industrial sensing applications.

This listing is for a NEW IFM OPU203. This optical fork sensor provides through-beam object detection within a fixed-slot geometry and operates on 24V DC, supporting precise sensing of small parts in automated systems such as counting, positioning, and edge detection in industrial environments.

This listing is for a NEW Square D MG24430 C60N supplementary protector. This miniature circuit breaker provides protection against overcurrent conditions within electrical circuits and operates at 277VAC with a 6 amp rating, single pole configuration, and C trip curve for industrial and commercial panel applications requiring reliable circuit protection.

This listing is for a NEW Banner K50APTRYYC7QPMA. This device combines capacitive touch sensing with multicolor LED indication, providing operator input and visual signaling in a single unit with 24V DC operation for industrial automation and machine interface applications.

This listing is for a NEW Banner SBRXF1. This unit provides photoelectric sensing as a receiver for use with fiber optic or opposed-mode sensing systems and supports detection of objects through transmitted light interruption in industrial automation applications.

This listing is for a NEW Allen-Bradley 1746-IB16/C. This discrete input module provides 16 digital input channels for integration with SLC 500 programmable logic controller systems and operates within a 10–30V DC input range for industrial automation applications requiring reliable signal monitoring.

This listing is for a USED Davis keyseater / vertical slotting machine. This unit provides reciprocating cutting motion for machining internal keyways, slots, and similar features using a gear-driven crank system powered by a 220/440V three-phase motor operating at 60 Hz. This configuration is used in toolrooms and machine shops for precision internal cutting operations on hubs, pulleys, and similar components.

This listing is for a NEW Allen-Bradley 800T-B6A. This pushbutton operator provides manual control input within industrial control panels and supports panel-mounted integration in 30.5mm operator stations used for machine control and automation systems.