New Arrivals

This listing is for a USED SMC VHS50‑10N‑X30 Pneumatic Safety Shut‑Off Valve Assembly. It is designed for isolating compressed air supply and safely exhausting downstream pressure in pneumatic systems during maintenance or emergency shutdown conditions. This unit is categorized as a manual 3‑port lockout valve assembly and includes capabilities such as OSHA‑compliant pressure relief, lockable exhaust position for energy isolation, and operation within a typical pressure range of approximately 0.1 to 1.0 MPa.

This listing is for a USED SMC C95ST160-100 pneumatic air cylinder. It is designed for heavy-duty industrial linear motion applications requiring high thrust and durability. This unit is categorized as a tie-rod style ISO-compatible air cylinder and includes capabilities such as a 160 mm bore size, 100 mm stroke length, double-acting operation, and support for compressed air systems up to 1.0 MPa.

This listing is for a USED ROSS 2768C4900 pilot operated check valve. It is designed for pneumatic circuit control, providing directional air management and load holding in industrial systems. This unit is categorized as a check valve assembly and includes the following capabilities 1/2″ porting, pilot‑actuated release function, and a rugged industrial body suitable for automation, clamping systems, and load‑holding applications.

This listing is for a USED TUNKERS V 40 LW A00 T12 10-135 pneumatic swing clamp. It is designed for industrial workholding and automation applications where precise clamping and clearance movement are required. This unit is categorized as a pneumatic swing clamp and includes a 40 mm series body size, left-hand swing configuration, integrated pneumatic actuator, and a swing angle range of approximately 10 to 135 degrees.

This listing is for a USED SMC AR40K‑N03E‑YZ‑B pneumatic air regulator. It is designed for regulating compressed air pressure in industrial pneumatic systems. This unit is categorized as a modular air pressure regulator and includes an adjustable output pressure range of approximately 7 to 125 psi, integrated pressure gauge, manual knob adjustment, and 3/8‑inch port configuration suitable for general automation and machine air control applications.

This listing is for a USED SMC VV5QC51‑1004TSKAN pneumatic valve manifold assembly. It is designed for distributed control of multiple pneumatic actuators in industrial automation systems. This unit is categorized as a modular solenoid valve manifold and includes multiple mounted SMC VQG‑series valves, an integrated SMC EX260‑SIL1 IO‑Link interface module, and common air supply and exhaust ports suitable for machine automation, robotics, and production equipment.

Includes:
VQC5101-51 x 1
VQC5201-51 x 2
VQC5401-51 x 1
VQC5501-51 x 4

This listing is for a USED SMC VV5QC41‑1203TSKAN pneumatic valve manifold assembly equipped with five SMC VQC4101‑51 solenoid valves. It is designed for distributed pneumatic control in industrial automation systems. This unit is categorised as a modular solenoid valve manifold and includes an integrated SMC EX260‑SIL1 IO‑Link interface module, 24 VDC operation, and common supply and exhaust ports suitable for machine automation, robotics, and production equipment.

This listing is for a USED Welker GB2N025G2L3E00 pneumatic cylinder. It is designed for linear actuation in industrial automation, tooling, and fixture applications. This unit is categorised as a compact pneumatic cylinder and is commonly used where reliable push/pull motion, repeatability, and durability are required in manufacturing environments.

This listing is for a USED SMC C96SDB80‑50C pneumatic cylinder. It is designed for linear actuation in industrial automation and machinery where ISO‑standard mounting and robust construction are required. This unit is categorised as an ISO 15552‑style tie‑rod pneumatic cylinder and features an 80 mm bore with a 50 mm stroke, suitable for push and pull motion in high‑duty manufacturing environments.

This listing is for a USED SMC CP96SDB80-200C pneumatic air cylinder. It is designed for linear motion actuation in industrial automation and machine applications requiring reliable force and repeatable stroke control. This unit is categorized as a double‑acting ISO‑style air cylinder and includes an 80 mm bore, 200 mm stroke, rear clevis style mounting, and cushioned end caps suitable for compressed air systems up to 1.0 MPa.

This listing is for a USED SMC CP96SDB80-50C pneumatic air cylinder. It is designed for short‑stroke linear motion in industrial automation and machine tooling applications where compact actuation and high force are required. This unit is categorized as a double‑acting ISO 15552 air cylinder and includes an 80 mm bore, 50 mm stroke, rear clevis mounting style, and adjustable air cushioning, suitable for compressed air systems up to 1.0 MPa.

This listing is for a USED SMC C96SB80-80C pneumatic air cylinder. It is designed for linear motion actuation in industrial automation, tooling, and machine applications requiring consistent force and precise stroke control. This unit is categorized as a double‑acting ISO 15552 tie‑rod air cylinder and includes an 80 mm bore, 80 mm stroke, adjustable air cushioning, and rear mounting configuration, suitable for compressed air systems up to 1.0 MPa.

This listing is for a USED SMC CP96SB50-25C pneumatic air cylinder. It is designed for short‑stroke linear actuation in industrial automation, tooling, and machine applications where compact size and reliable force are required. This unit is categorized as a double‑acting ISO‑style air cylinder and includes a 50 mm bore, 25 mm stroke, adjustable air cushioning, and rear mounting configuration, suitable for compressed air systems up to 1.0 MPa.

This listing is for a USED SMC MGPM63TF‑125 compact guided pneumatic cylinder. It is designed to provide linear actuation with high rigidity and precise guidance for industrial automation applications. This unit is categorized as a guided air cylinder and features a 63 mm bore, 125 mm stroke length, integrated dual guide rods, and a compact aluminum body. The MGPM series is commonly used in applications requiring load support, anti‑rotation, and accurate positioning in a space‑saving design.

This listing is for a USED Balluff BNI IOL‑104‑S02‑R012‑008 IO‑Link Sensor/Actuator Hub, model BNI00CH. It is designed for distributed I/O expansion in industrial automation systems using IO‑Link communication. This unit is categorized as an IO‑Link hub and includes the following capabilities multiple configurable digital I/O channels, M12 I/O ports, and a compact industrial‑grade housing.

This listing is for a USED SMC C96SF100‑250 pneumatic cylinder. It is designed for industrial linear motion applications requiring reliable force and precise positioning. This unit is an ISO 15552 compliant tie‑rod air cylinder with a 100mm bore and 250mm stroke, suitable for automation equipment, material handling systems, and OEM machinery.

This listing is for a USED SMC CNA2F80‑140‑D pneumatic cylinder. It is designed for linear actuation in industrial automation and machine control applications. This unit is categorized as a heavy‑duty tie‑rod style air cylinder and features an 80 mm bore, 140 mm stroke length, and a maximum operating pressure of 1.0 MPa (145 PSI). The CNA2 series is commonly used where higher strength, durability, and standardized mounting are required.

This listing is for a USED Balluff BNI EIP‑508‑105‑R015 Ethernet/IP I/O Module, model BNI008M. It is designed for distributed machine‑mounted I/O using Ethernet/IP communication. This unit is categorized as an industrial I/O module and includes the following capabilities M12 sensor/actuator ports, rugged field‑mountable housing, and Ethernet/IP network connectivity.

This listing is for a USED Balluff BNI EIP‑302‑105‑R015 Ethernet/IP I/O Module, model BNI008P. It is designed for distributed machine‑level I/O in Ethernet/IP automation networks. This unit is categorized as an industrial fieldbus I/O block and includes capabilities such as an Ethernet/IP communication interface, rugged sealed construction, multiple M12 industrial connectors, and support for 18 to 30.2 VDC operation.

This listing is for a NEW SMC VHS50-10N-X30 air safety shut-off valve assembly. This unit is designed for isolating and exhausting air pressure in industrial pneumatic systems and includes an integrated pressure gauge and mounting bracket. The VHS50 series is commonly used in air preparation assemblies and machine safety circuits, providing manual lockout capability, high flow performance, and reliable pressure relief.

This listing is for a NEW Balluff BCC M415-M415-3A-313-EX45T2-150. It provides a pre-terminated M12 connection cable with matching connectors on both ends, supporting reliable signal transmission through a 5-pin A-coded configuration and a 15 meter cable length suited for extended routing between field devices and control points.

This listing is for a NEW Balluff BCC M415-M414-3A-304-EX44T2-050. It provides a pre-terminated M12 connection cable for linking sensors and field devices, featuring a 4‑pin A-coded interface, straight connectors, and a 5 meter cable length for reliable signal transmission across equipment and machine wiring installations.

This listing is for a NEW Balluff BCC M415-M414-3A-304-EX44T2-030. It provides a pre-terminated M12 connection cable for linking sensors and field devices, featuring a 4‑pin A-coded interface, straight connectors, and a 3 meter cable length for signal transmission and device-to-device wiring across machinery and control installations.

This listing is for a NEW Balluff BNI IOL-802-102-Z037. It provides multi-segment LED status indication with integrated IO-Link communication and audible signaling, supporting configurable visual and audible alerts for machine state monitoring and operator notification in production equipment and control installations.