New Arrivals

This listing is for a NEW Brad Harrison E66A06004M100 Industrial Ethernet cordset. Built with RJ45 connectors at both ends, this 10 meter cable supports Ethernet-based communication between industrial controllers, HMIs, switches, and network-connected automation equipment. The TPE cable construction and Category 5 performance characteristics make it suitable for machine networking, control systems, and industrial communication infrastructure.

This listing is for a NEW Murrelektronik 7700-40121-1500500 cordset. Featuring a straight M12 male connector and a 90° M12 female connector, this 4-pole cable supports field-level connectivity between sensors, actuators, distributed I/O devices, and automation equipment. The 5 meter TPE cable, 18 AWG conductors, and 250V AC/DC rating make it suitable for industrial control and signal distribution applications.

This listing is for a NEW Murrelektronik 7700-44511-S7V0150 Industrial Ethernet cordset. Featuring M12 D-coded male connectors on both ends and shielded CAT5e cable construction, this cable supports Ethernet-based communication between industrial controllers, network devices, and automation equipment. The drag-chain rated design and compact 1.5 meter length accommodate machine networking, PROFINET installations, and industrial communication systems.

This listing is for a NEW Siemens 6XV1440-4BN10 connection cable. Intended for SIMATIC HMI mobile panel applications, the cable provides the interface between compatible mobile operator panels and associated control equipment. The 10 meter cable length supports machine operation, commissioning, maintenance, and mobile HMI installations requiring operator mobility around equipment and production systems.

This listing is for a NEW Murrelektronik 7700-40021-1500700 cordset. Featuring straight M12 connectors and a 4-pole A-coded configuration, this pre-terminated cable supports signal and control connections between sensors, actuators, distributed I/O devices, and automation equipment. The 7 meter TPE cable construction, 250V AC/DC rating, and ITC/PLTC designation make it suitable for industrial control and signal distribution applications.

This listing is for a NEW Murrelektronik 7700-44711-S7V1000 Industrial Ethernet cordset. Combining an M12 D-coded connector with an RJ45 connector, this shielded CAT5e cable supports network communication between industrial devices and Ethernet-based control systems. The 10 meter drag-chain rated construction is well suited for PROFINET networks, machine communication, and industrial automation infrastructure.

This listing is for a NEW Murrelektronik 7700-40021-1500100 cordset. Built with straight M12 connectors at both ends, this 4-pole cable supports device-level connections between sensors, actuators, distributed I/O modules, and automation equipment. The 1 meter length, 18 AWG conductors, and ITC/PLTC-rated TPE cable construction make it suitable for industrial control and signal transmission applications.

This listing is for a NEW Murrelektronik 7999-40141-7490100 cordset. Featuring a straight M12 male connector and a 90° M12 female connector, this 5-pole cable supports power, control, and signal connections across industrial automation equipment. The PUR cable construction, 0.5 mm² conductors, and compact 1 meter length make it well suited for machine wiring, distributed I/O, sensors, actuators, and field device connectivity.

This listing is for a NEW Murrelektronik 7700-44511-S7V1500 Industrial Ethernet cordset. Featuring M12 D-coded male connectors on both ends and a shielded CAT5e cable, this cordset supports Ethernet-based communication networks in industrial automation environments. The drag-chain rated construction and 15 meter length make it suitable for machine networking, PROFINET installations, and industrial communication infrastructure.

This listing is for a NEW Murrelektronik 7700-44511-S7V1000 industrial Ethernet cordset. Built with M12 D-coded male connectors on both ends, this shielded CAT5e cable supports Industrial Ethernet and PROFINET network connectivity in automation, control, and machine communication systems. The 10 meter SF/UTP construction provides a pre-terminated solution for network infrastructure and field-level communication applications.

This listing is for a NEW Brad Connectivity 1200660381 Micro-Change cordset. Configured with straight Micro-Change male and 90° female connectors, the cable supports sensor, actuator, and field-level device connectivity within industrial automation systems. The 5 meter cable length and 4-pin configuration accommodate signal and control applications in machinery, material handling equipment, and distributed I/O installations.

This listing is for a NEW Murrelektronik 7700-40121-U040500 cordset. Equipped with a straight M12 male connector and a 90° M12 female connector, this 4-pole cable is intended for sensor, actuator, and control signal connections in industrial automation systems. The 5 meter length, 22 AWG conductors, and ITC/PLTC-rated TPE cable construction support machine wiring, distributed I/O networks, and general-purpose industrial connectivity.

This listing is for a NEW Murrelektronik 7700-40121-1500300 cordset. Featuring a straight M12 male connector and a 90° M12 female connector, this 4-pole cable supports sensor, actuator, and distributed I/O connectivity within industrial automation systems. The TPE cable construction, 18 AWG conductors, and 250V AC/DC rating make it suitable for machine wiring, signal transmission, and control applications.

This listing is for a NEW Murrelektronik 7000-08041-6301000 cordset. Featuring an M8 female A-coded connector and a 10 meter PUR cable, this cable supports sensor, actuator, and signal transmission applications in industrial automation systems. The drag-chain capable construction, 4A current rating, and extended cable length make it suitable for machine wiring, distributed I/O, and motion-related installations.

This listing is for a USED Brad Connectivity 113030K13M180 Mini-Change cordset. Built with straight Mini-Change connectors and 3-conductor 16 AWG cable, this cordset provides power distribution and field device connectivity for industrial equipment, automation systems, and machine installations. The extended 18 meter cable length supports applications requiring longer cable runs between devices and control equipment.

This listing is for a USED Dongan 76-0209SH three phase general purpose transformer. With a 9 kVA capacity, 480V Delta primary, and 240V Delta secondary, the unit is suited for supplying three-phase equipment and power distribution circuits requiring voltage conversion. The enclosed NEMA 3R construction supports installation in industrial environments where a protected transformer enclosure is required.

This listing is for a USED Dongan 76-0209SH three phase general purpose transformer. Built for three-phase voltage conversion and power distribution duties, the transformer features a 480V Delta primary and 240V Delta secondary arrangement with a 9 kVA capacity. The NEMA 3R enclosure and industrial construction make it suitable for supplying machinery, plant equipment, and facility electrical systems requiring three-phase power transformation.

This listing is for a USED Dongan 76-0209SH three phase general purpose transformer. Configured for 480V Delta input and 240V Delta output service, this 9 kVA unit supports voltage conversion and power distribution requirements in industrial machinery, manufacturing equipment, and facility electrical systems. The transformer is housed in a NEMA Type 3R enclosure and utilizes a three-wire primary and secondary configuration.

This listing is for a USED Dongan 76-0209SH three phase general purpose transformer. Rated 9 kVA, the unit features a 480V Delta primary and 240V Delta secondary configuration for industrial power distribution and voltage conversion requirements. The transformer is housed in a NEMA Type 3R enclosure and is suited for equipment supply, facility power systems, and three-phase electrical infrastructure applications.

This listing is for a USED Dongan 76-0209SH three phase general purpose transformer. Configured with a 480V Delta primary and 240V Delta secondary, the transformer provides three-phase voltage conversion for industrial power distribution and equipment supply applications. The unit carries a 9 kVA rating and is housed in a NEMA Type 3R enclosure suitable for installations requiring protection from environmental exposure.

This listing is for a USED Dongan 76-0209SH three phase transformer. Configured with a 480V Delta primary and 240V Delta secondary, this 9 kVA transformer provides voltage conversion and power distribution for industrial equipment, machinery, and control systems. The NEMA Type 3R enclosure supports indoor or outdoor installations where protection from environmental exposure is required.

This listing is for a USED Brad Connectivity 113030K13M230 Mini-Change cordset. The cable provides power and field-level device connectivity through Mini-Change male and female connectors in a straight-through configuration. Featuring a 23 meter cable length, 3-conductor 16 AWG construction, and 600V rating, this cordset is used in industrial automation, machinery, material handling equipment, and control system installations.

This listing is for a USED Festo SFC-DC-VC-3-E-H2-PB servo pneumatic controller. Part of the Festo SFC series, the unit provides closed-loop positioning control for pneumatic drives and positioning systems. The integrated display, operator keypad, Profibus communication interface, and RS232 service connection support commissioning, parameter configuration, diagnostics, and positioning control within automated manufacturing and material handling systems.

This listing is for a NEW Rittal EB 1578.500 industrial control panel enclosure. Constructed for housing electrical and automation components, the enclosure provides a protected mounting environment for industrial control equipment, power distribution devices, and automation hardware. The design incorporates a hinged door, gasketed seal, internal mounting panel, and enclosure ratings suitable for industrial installations requiring Type 1, 12, and 4 protection.