All Products - Page 52 of 399 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Sort By:

ATLAS COPCO ETD ST61‑20‑10‑T25 Tensor STR Nutrunner USED 0

ATLAS COPCO ETD ST61‑20‑10‑T25 Tensor STR Nutrunner USED

$1,600.00

Availability:

1 in stock

SKU: IGAM3580204

This listing is for a USED Atlas Copco ETD ST61‑20‑10‑T25 Electric Straight Nutrunner from the Tensor STR family. It is a high‑precision, transducerized electric nutrunner designed for controlled tightening applications in industrial assembly environments. This model provides accurate torque control, high rundown speed, and process feedback when used with compatible Atlas Copco controllers.

PROMESS S72401‑NA‑024 Servo Drive USED 0

PROMESS S72401‑NA‑024 Servo Drive USED

$1,600.00

Availability:

1 in stock

SKU: IGAM3580226

This listing is for a USED Promess S72401‑NA‑024 servo press controller and power unit. It is designed to control Promess electric servo press and joining systems in industrial automation environments. This unit is categorized as a servo press controller / power supply and supports three‑phase input power, integrated control electronics, and multiple communication and I/O interfaces for force‑displacement controlled assembly applications.

BOSCH 0811‑404‑033 High‑Response Hydraulic Valve w/ Position Feedback USED 0

BOSCH 0811‑404‑033 High‑Response Hydraulic Valve w/ Position Feedback USED

$1,600.00

Availability:

2 in stock

SKU: IGAM2840220

This listing is for a USED Bosch 0811‑404‑033 High‑Response Hydraulic Valve with Electrical Position Feedback. It is designed for high‑precision hydraulic flow control in industrial motion systems. This unit is categorized as a high‑response proportional directional valve and includes the following verified capabilities: 315 bar maximum operating pressure, size 6 configuration, and 2–40 L/min nominal flow with up to 40 L/min maximum flow.

ROBOT REELS X9001-33V-R30iB Teach Pendant Cable Reel USED 0

ROBOT REELS X9001-33V-R30iB Teach Pendant Cable Reel USED

$1,600.00

Availability:

1 in stock

SKU: IGAM0210054

This listing is for a USED Robot Reels X9001-33V-R30iB teach pendant cable reel. It is designed to manage and retract teach pendant cabling for industrial robot systems. This unit is categorized as a robotic accessory and includes capabilities suited for cable routing, cable protection, and organized operator workstation layouts.

Joslyn Clark 5SRG-76 Slim Jim Relay NEW 0

Joslyn Clark 5SRG-76 Slim Jim Relay NEW

$1,600.00

Availability:

1 in stock

SKU: IGAM1980602

This listing is for a NEW Joslyn Clark 5SRG-76 Slim Jim Relay. It is designed for industrial motor control and switching applications. This unit is categorized as a control relay and includes capabilities such as a 500 VAC maximum rating, coil voltage of 110-120V AC at 50/60 Hz, and comes with a KPMA pole kit.

VESTIL EHLT-4848-2-43 Electric Hydraulic Lift with Carousel USED 0

VESTIL EHLT-4848-2-43 Electric Hydraulic Lift with Carousel USED

$1,600.00

Availability:

1 in stock

SKU: IGAM2580046

This listing is for a USED Vestil EHLT-4848-2-43 Electric Hydraulic Lift Table with Carousel. It is designed for lifting and rotating heavy loads in industrial environments. This unit is categorized as a hydraulic lift table and includes the following capabilities: 48″ x 48″ platform size, 2,000 lbs load capacity, and 43-inch maximum lift height.

CONTROL TECHNIQUES RECT-11406840A UNIDRIVE M AC DRIVE USED 0

CONTROL TECHNIQUES RECT-11406840A UNIDRIVE M AC DRIVE USED

$1,600.00

Availability:

1 in stock

SKU: IGAM1700094

This listing is for a used Control Techniques Unidrive M AC drive. Unit appears complete and intact as shown in the photos. No functional testing has been performed beyond visual inspection.

See photos for details.

Part No: RECT-11406840A
Type: AC Drive / Servo Drive
Series: Unidrive M
Manufacturer: Control Techniques (Nidec)
Input Voltage: 380–480 VAC
Input Frequency: 50–60 Hz
Phase: 3 Phase
Output Voltage: 513–648 VDC
Output Current: 684 A
Input Current: 557 A
Serial No: E211900003
Condition: USED
Country of Manufacture: Romania

OMRON F3SG-4RA0430-30 Safety Light Curtain Set 430mm NEW 0

OMRON F3SG-4RA0430-30 Safety Light Curtain Set 430mm NEW

$1,600.00

Availability:

1 in stock

SKU: IGAM2270109

This listing is for a NEW OMRON F3SG-4RA0430-30. It is designed for machine guarding and personnel protection in industrial environments. This unit is categorized as a safety light curtain and includes the following capabilities: 430mm protective height, 30mm resolution, and IP65/IP67 environmental protection.

Walchem EHE31E1-FCT Metering Pump 5.5 GPH 150 PSI NEW 1

Walchem EHE31E1-FCT Metering Pump 5.5 GPH 150 PSI NEW

$1,600.00

Availability:

1 in stock

SKU: IGAM2780046

This listing is for a NEW Walchem EHE31E1‑FCT. Provides chemical dosing and metered fluid delivery for industrial systems, supporting controlled flow up to 5.5 GPH and pressure up to 150 PSI with 115 VAC operation. This unit supports accurate injection of chemicals into process streams with durable PVDF and PTFE wetted components.

FANUC A660-2005-T882 L=14.0M Servo Signal Cable NEW 0

FANUC A660-2005-T882 L=14.0M Servo Signal Cable NEW

$1,600.00

Availability:

1 in stock

SKU: IGAM1980330

This listing is for a NEW FANUC A660-2005-T882 14M Cable.

Servo signal cable designed for FANUC industrial automation systems, compatible with various robot and CNC controller setups.

See photos for details.

Part No: A660-2005-T882
Type: Servo Signal Cable
Condition: NEW
Length: 14.0 Meters
Connector Type: FANUC Standard Shielded Ends
Application: Robot & CNC Controller Interface
Shielding: EMC Ferrite Core

Please message us with any questions.

HOWA H037M10 10″ 3‑Jaw Power Chuck USED 0

HOWA H037M10 10″ 3‑Jaw Power Chuck USED

$1,600.00

Availability:

1 in stock

SKU: IGAM2230007

This listing is for a USED HOWA H037M10 10″ 3‑Jaw Power Chuck (flat‑back, open‑center).

– 254 mm (10″) diameter with ~75 mm through‑hole
– Hardened reversible jaws for internal/external gripping
– Max speed approx. 4,200 rpm, jaw stroke ~9.3 mm
– Heavy-duty wedge‑hook design, ideal for CNC/production lathes
– Back‑mount type (likely A2‑8) — please verify thread

See photos for jaw condition, backplate, and nameplate details.

Part No: H037M10
Type: 10″ 3‑Jaw Power Chuck (Open‑Center)
Condition: USED
Key Specs:
– 10″ / 254 mm diameter
– ~75 mm thru‑hole
– 9.3 mm jaw stroke, up to 4,200 rpm
– Hardened reversible jaws

INDUSTRIAL KINETICS Roller Conveyor Lane 23.5" x 108" USED 0

INDUSTRIAL KINETICS Roller Conveyor Lane 23.5″ x 108″ USED

$1,600.00

Availability:

2 in stock

SKU: IGAM1240050

This listing is for a USED Industrial Kinetics powered roller conveyor lane. This unit represents a single conveyor lane and features a steel frame, powered roller bed, adjustable support legs, and an integrated gearmotor drive. The conveyor lane measures 23.5 inches wide by 108 inches (9 feet) long and is suitable for industrial material handling, automation lines, and manufacturing environments.

CHEVALIER ELC-50100C ELECTRO-MAGNETIC CHUCK 19.7X39.4IN SURFACE GRINDER USED 0

CHEVALIER ELC-50100C ELECTRO-MAGNETIC CHUCK 19.7X39.4IN SURFACE GRINDER USED

$1,595.00

Availability:

1 in stock

SKU: IGAM1370017

This listing is for a USED Chevalier ELC-50100C Electro-Magnetic Chuck.

Precision 19.7″ x 39.4″ magnetic chuck designed for use with Chevalier surface grinders. Provides strong, uniform magnetic holding for grinding applications. Includes variable hold control via Neutrofier system (if available). Ideal for high-precision surface finishing.

See photos for details.

Part No: ELC-50100C
Type: Electro-Magnetic Chuck
Condition: USED
Chuck Size: 19.7″ x 39.4″
Application: Surface Grinding
Variable Hold with Neutrofier Control
Precision Ground Surface
Please message us with any questions.

OMRON F3SG-4RA2030-30 Light Curtain Set (2030mm) USED 0

OMRON F3SG-4RA2030-30 Light Curtain Set (2030mm) USED

$1,575.00

Availability:

2 in stock

SKU: IGAM3000008

This listing is for a USED Omron F3SG-4RA2030-30-L and F3SG-4RA2030-30-D Light Curtain Set. It is designed for machine safety applications, providing reliable detection and protection in hazardous zones. This unit is categorized as a safety light curtain system and includes the following capabilities: 2030 mm sensing height, 30 mm resolution, and advanced muting and blanking functions.

RUWAC 9956XLT HEC-XLT 55 Gallon Cyclone Pre-Separator USED 0

RUWAC 9956XLT HEC-XLT 55 Gallon Cyclone Pre-Separator USED

$1,550.00

Availability:

1 in stock

SKU: IGAM4120020

Used Ruwac 9956XLT HEC-XLT cyclone pre-separator configured for industrial dust collection and material separation ahead of vacuum filtration systems. This unit incorporates high-efficiency cyclonic separation with a 55 gallon collection drum to remove heavier debris from the airflow stream, supporting improved filtration performance and reduced filter loading in demanding industrial environments.

ESAB SVI 300i CVCC Welding Power Source with Mig 4HD Wire Feeder USED 0

ESAB SVI 300i CVCC Welding Power Source with Mig 4HD Wire Feeder USED

$1,550.00

Availability:

1 in stock

SKU: IGAM0530017

This listing is for a USED ESAB SVI 300i CVCC welding power source paired with an ESAB Mig 4HD wire feeder. The system is a constant voltage / constant current (CVCC) industrial welding setup designed for wire welding processes in manufacturing and fabrication environments. The power source and wire feeder are mounted together on a wheeled cart with cables and accessories present as shown.

SIEMENS 1FK2204‑5AF0‑1SA0 SIMOTICS S Servo Motor NEW 0

SIEMENS 1FK2204‑5AF0‑1SA0 SIMOTICS S Servo Motor NEW

$1,550.00

Availability:

1 in stock

SKU: IGAM1701090

This listing is for a NEW Siemens 1FK2204‑5AF0‑1SA0 SIMOTICS S servo motor. It is a compact, high‑performance brushless AC servo motor designed for precision motion control applications. This motor is encoder‑equipped and supports high rotational speed, making it suitable for use with Siemens SINAMICS drive systems in automation, CNC, and positioning equipment.

SIEMENS 1FK2204‑5AF0‑1‑0SA0 SIMOTICS S Servo Motor NEW 0

SIEMENS 1FK2204‑5AF0‑1‑0SA0 SIMOTICS S Servo Motor NEW

$1,550.00

Availability:

2 in stock

SKU: IGAM1701077

This listing is for a NEW Siemens 1FK2204‑5AF0‑1‑0SA0 SIMOTICS S servo motor. It is a compact, high‑performance brushless AC servo motor designed for precision motion control applications. This motor is encoder‑equipped, rated for high rotational speed, and is commonly used with Siemens SINAMICS drive systems in industrial automation, machine tools, and positioning systems.

2021 BECKHOFF CP2912-0000 12.1" TOUCHSCREEN DIGITAL INPUT MODULE; USED 0

2021 BECKHOFF CP2912-0000 12.1″ TOUCHSCREEN DIGITAL INPUT MODULE; USED

$1,550.00

Availability:

1 in stock

SKU: IGAM1700040

USED Beckhoff CP2912‑0000 Panel PC. Designed for industrial visualization and machine control applications. The device features a 12.1 inch TFT LED display, an integrated touchscreen, and operates on 24V DC Class 2 power. As an industrial operator interface, the CP2912 family offers the capability to provide machine-level visualization, system monitoring, and interaction with automation hardware.

5,000 LB METTLER TOLEDO INDUSTRIAL FLOOR SCALE 0

5,000 LB METTLER TOLEDO INDUSTRIAL FLOOR SCALE

$1,550.00

Availability:

1 in stock

SKU: IGAM0480013

FANUC A06B-1404-B103 AC Servo Motor A12/1000 2.7 kW NEW 0

FANUC A06B-1404-B103 AC Servo Motor A12/1000 2.7 kW NEW

$1,550.00

Availability:

1 in stock

SKU: IGAM1050070

ZUMBACH EU 20K Speed Control Unit USED 1

ZUMBACH EU 20K Speed Control Unit USED

$1,545.00

Availability:

1 in stock

SKU: IGAM0450417

SIEMENS 6AV7240‑3BC04‑0HA0 SIMATIC IPC477D Touch Panel PC USED 0

SIEMENS 6AV7240‑3BC04‑0HA0 SIMATIC IPC477D Touch Panel PC USED

$1,525.00

Availability:

5 in stock

SKU: IGAM1910719

This listing is for a USED Siemens 6AV7240‑3BC04‑0HA0 SIMATIC IPC477D touch panel PC. This unit is designed for industrial automation environments and is commonly installed as an operator interface for machine control, visualization, and PC‑based HMI applications. It is typically used to run Siemens HMI software or other industrial visualization platforms in manufacturing and OEM equipment.

SIEMENS 6AV7240-3BC04-0HA0 SIMATIC IPC477D Touch Panel PC USED 0

SIEMENS 6AV7240-3BC04-0HA0 SIMATIC IPC477D Touch Panel PC USED

$1,525.00

Availability:

33 in stock

SKU: IGAM1910379

This listing is for a USED Siemens 6AV7240-3BC04-0HA0. This unit is designed to serve as an industrial panel PC with integrated touchscreen interface for operator visualization and control functions within automation systems. It is commonly applied in machine control panels and industrial HMI environments where a SIMATIC IPC477D platform provides Ethernet connectivity, 15-inch display interface, and industrial computing capabilities.

SIEMENS 1FT6062-1AF71-4EG1 SERVO MOTORS NEW WITH BOX 0

SIEMENS 1FT6062-1AF71-4EG1 SERVO MOTORS NEW WITH BOX

$1,525.00

Availability:

2 in stock

SKU: IGAM0450171

The Siemens 1FT6062-1AF71-4EG1 Servo Motor is a new precision-engineered motor delivered in its original box, ideal for high-performance automation systems requiring accurate control, compact size, and dependable torque output. As part of Siemens’ 1FT6 series of synchronous servo motors, this model is built for seamless integration into SINAMICS drive systems, offering high-resolution feedback and dynamic response for a wide range of industrial applications. Its robust design and premium construction make it suitable for demanding environments such as packaging, robotics, CNC machining, and material handling.

New Arrival

KNIGHT GLOBAL LT4860 1000lbs Lift Table USED 0

KNIGHT GLOBAL LT4860 1000lbs Lift Table USED

$1,500.00

Availability:

1 in stock

SKU: IGAM1980569

DOMINO Cx-PH Std Inkjet Printhead USED 0

DOMINO Cx-PH Std Inkjet Printhead USED

$1,500.00

Availability:

1 in stock

SKU: IGAM3470157

Kent KGS-200 Surface Grinder USED 0

Kent KGS-200 Surface Grinder USED

$1,500.00

Availability:

1 in stock

SKU: IGAM4270002

This listing is for a USED Kent KGS-200. This unit provides precision surface grinding through a horizontal spindle and reciprocating table configuration, supporting flat surface finishing and controlled material removal in machining environments with manual axis control and digital readout positioning capability.

HAMMOND 14" Industrial Abrasive Cutoff Saw (Wet-Type / Dual-Wheel Enclosed Design) USED 0

HAMMOND 14″ Industrial Abrasive Cutoff Saw (Wet-Type / Dual-Wheel Enclosed Design) USED

$1,500.00

Availability:

1 in stock

SKU: IGAM4170003

This listing is for a USED Hammond Machinery Builders 14″ industrial cutoff saw. It performs straight-line cutting of metal stock using an abrasive wheel, with a rigid cast base and fixed-head layout supporting consistent, repeatable cuts. The 14-inch wheel capacity, dual work supports, and pedestal-mounted construction suit fabrication and production environments handling bar, tube, and structural material.

ATLAS COPCO 8435 3070 20 MaxiDisplay 3 HMI Display Panel 19V DC 100–240V AC NEW 0

ATLAS COPCO 8435 3070 20 MaxiDisplay 3 HMI Display Panel 19V DC 100–240V AC NEW

$1,500.00

Availability:

1 in stock

SKU: IGAM2840380

This listing is for a NEW Atlas Copco 8435 3070 20 MaxiDisplay 3. A panel-mounted operator interface supporting system visualization and interaction within Atlas Copco control environments, equipped with a flat display, integrated software interface capability, and dual power input options (19V DC or 100–240V AC).