All Products - Page 53 of 399 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Sort By:

MARATHON ELECTRIC E983B 30 HP AC Motor 208-230/460V 3PH TEFC USED 0

MARATHON ELECTRIC E983B 30 HP AC Motor 208-230/460V 3PH TEFC USED

$1,500.00

Availability:

1 in stock

SKU: IGAM3920007

This listing is for a USED MARATHON ELECTRIC E983B. This unit is designed to provide rotary mechanical power through a three-phase AC motor for industrial equipment and machinery. It is commonly applied in conveyors, pumps, fans, and general-purpose industrial drive systems requiring 30 HP output, 208–230/460 VAC operation, and a TEFC enclosure.

VAN DORN DEMAG P28G7064A 20 HP AC Electric Motor USED 0

VAN DORN DEMAG P28G7064A 20 HP AC Electric Motor USED

$1,500.00

Availability:

1 in stock

SKU: IGAM4010015

This listing is for a USED Van Dorn Demag P28G7064A. This unit is designed to serve as a 3-phase AC electric motor for driving industrial machinery and equipment where consistent rotational power is required. This unit provides 20 HP output, 230/460V operation, 3-phase power, and 1180 RPM speed, supporting continuous-duty operation in mechanical drive systems requiring reliable torque and motor-driven motion.

KOHLER KCT‑ACTC‑0200S 200A Automatic Transfer Switch 208V 3‑Phase NEW 0

KOHLER KCT‑ACTC‑0200S 200A Automatic Transfer Switch 208V 3‑Phase NEW

$1,500.00

Availability:

1 in stock

SKU: IGAM3970010

This listing is for a NEW Kohler KCT‑ACTC‑0200S automatic transfer switch. It is designed to automatically transfer electrical load between utility and generator power sources during outages and restoration events. This unit provides 200 amp capacity at 208 volts three‑phase service and is used in emergency and standby power systems requiring reliable automatic switching for commercial and industrial applications.

GENERAC GUARDIAN 100A Automatic Transfer Switch w/ Breaker Panel USED 0

GENERAC GUARDIAN 100A Automatic Transfer Switch w/ Breaker Panel USED

$1,500.00

Availability:

1 in stock

SKU: IGAM3970012

This listing is for a USED Generac Guardian 100 amp automatic transfer switch with integrated load center. It is designed to automatically transfer electrical power from utility service to a standby generator during outages and restore utility power when available. This unit includes a built‑in circuit breaker panel for managing selected circuits, supporting residential and light commercial standby power applications.

GENERAC GUARDIAN 100A Automatic Transfer Switch 120/240V USED 0

GENERAC GUARDIAN 100A Automatic Transfer Switch 120/240V USED

$1,500.00

Availability:

1 in stock

SKU: IGAM3970013

This listing is for a USED Generac Guardian 100 amp automatic transfer switch. It is designed to automatically transfer electrical load from utility power to a backup generator during an outage and safely return power when utility service is restored. This unit supports 120/240V single‑phase service and is prewired with conduit leads, making it suitable for residential and light commercial standby generator systems.

ULINE H‑5594 Steel 50 Degree Crossover Bridge 500LB Capacity NEW 0

ULINE H‑5594 Steel 50 Degree Crossover Bridge 500LB Capacity NEW

$1,500.00

Availability:

1 in stock

SKU: IGAM4010001

This listing is for a NEW ULINE H‑5594 steel 50‑degree crossover bridge. This unit is designed to provide safe pedestrian access over conveyors, pipes, or floor obstructions in industrial environments. It features a fixed 50‑degree stair angle, steel construction, and integrated handrails, making it suitable for warehouses, manufacturing facilities, and material handling operations.

HOBART RCC450RVS Constant Current Welding Power Source USED 0

HOBART RCC450RVS Constant Current Welding Power Source USED

$1,500.00

Availability:

1 in stock

SKU: IGAM3930005

This listing is for a USED Hobart RCC450RVS constant current welding power source. The RCC450RVS is an industrial DC welding power supply designed for stick (SMAW), TIG (GTAW), and other constant‑current welding applications. The unit provides stable DC output for heavy‑duty welding environments and is commonly used in fabrication shops and manufacturing facilities. The system shown includes a Hobart wire feeder mounted on top.

SEW‑EURODRIVE R97 DRL132S4BE11HR/TF/ES7S Helical Gearmotor USED 0

SEW‑EURODRIVE R97 DRL132S4BE11HR/TF/ES7S Helical Gearmotor USED

$1,500.00

Availability:

1 in stock

SKU: IGAM1910572

This listing is for a USED SEW‑EURODRIVE R97 DRL132S4BE11HR/TF/ES7S helical gearmotor. This unit combines a three‑phase AC induction motor with an R‑series inline helical gearbox and is commonly installed in conveyors, material handling systems, and industrial process equipment requiring high torque at reduced output speed. The assembly includes an integrated brake and encoder.

SEW‑EURODRIVE R97 DRL132S4BE11HR/TF/ES7S Helical Gearmotor USED 0

SEW‑EURODRIVE R97 DRL132S4BE11HR/TF/ES7S Helical Gearmotor USED

$1,500.00

Availability:

1 in stock

SKU: IGAM1910573

This listing is for a USED SEW‑EURODRIVE R97DRL132S4BE11HR/TF/ES7S helical gearmotor. This unit combines a three‑phase AC induction motor with an R‑series inline helical gearbox and is commonly installed in conveyors, material handling systems, and industrial process equipment requiring high torque at reduced output speed. The assembly includes an integrated brake and encoder.

SEW‑EURODRIVE R97 DRL132S4BE11HR/TF/ES7S Helical Gearmotor USED 0

SEW‑EURODRIVE R97 DRL132S4BE11HR/TF/ES7S Helical Gearmotor USED

$1,500.00

Availability:

1 in stock

SKU: IGAM1910574

This listing is for a USED SEW‑EURODRIVE R97DRL132S4BE11HR/TF/ES7S helical gearmotor. This unit combines a three‑phase AC induction motor with an R‑series inline helical gearbox and is commonly used in conveyors, material handling, and industrial process equipment requiring high torque at reduced output speed. The assembly includes an integrated brake and encoder.

SEW‑EURODRIVE R97 DRL132S4BE11HR/TF/ES7S Gearmotor USED 0

SEW‑EURODRIVE R97 DRL132S4BE11HR/TF/ES7S Gearmotor USED

$1,500.00

Availability:

1 in stock

SKU: IGAM1910575

This listing is for a USED SEW‑EURODRIVE R97DRL132S4BE11HR/TF/ES7S helical gearmotor. Commonly installed in industrial material handling, conveyors, and process equipment, this unit combines a helical gear reducer with an integrated AC motor to provide high torque at reduced output speed for continuous‑duty applications.

3M‑MATIC 700A Adjustable Case Sealer Type 40800 USED 0

3M‑MATIC 700A Adjustable Case Sealer Type 40800 USED

$1,500.00

Availability:

1 in stock

SKU: IGAM3680019

This listing is for a USED 3M‑Matic 700A adjustable case sealer, Type 40800. This industrial carton sealing machine is designed to apply pressure‑sensitive tape to the top and bottom of corrugated boxes. The 700A model features adjustable guides to accommodate different carton sizes and an integrated conveyor system for smooth case transport. This unit operates on 115 VAC single‑phase power and is commonly used in packaging, shipping, and production environments.

SIEMENS 1FK2104‑6AF11‑0SA0 SIMOTICS S Servo Motor NEW 0

SIEMENS 1FK2104‑6AF11‑0SA0 SIMOTICS S Servo Motor NEW

$1,500.00

Availability:

3 in stock

SKU: IGAM1701079

This listing is for a NEW Siemens SIMOTICS S servo motor, part number 1FK2104‑6AF11‑0SA0. It is designed for precise speed and torque control in industrial motion control applications and is commonly used with Siemens SINAMICS drive systems. This motor is a synchronous AC servo motor with integrated encoder feedback and holding brake, suitable for automation, robotics, and machine control axes requiring reliable positioning and stopping performance.

TRS SYSTEMTECHNIK SPC‑410‑416‑S Slot‑SPC Industrial Control Module NEW 0

TRS SYSTEMTECHNIK SPC‑410‑416‑S Slot‑SPC Industrial Control Module NEW

$1,500.00

Availability:

7 in stock

SKU: IGAM2840186

This listing is for a NEW TRS Systemtechnik SPC‑410‑416‑S Slot‑SPC industrial control module. It is a slot‑based industrial PC / PLC expansion module designed for use in TRS Slot‑SPC, Slot‑SPS, and fieldbus‑based automation systems. This module is used to extend control, communication, or processing functionality within industrial automation platforms where modular, rack‑based control architectures are required.

TEIJIN SEIKI (NABTESCO) RV-380A2-141 VIGODRIVE Gear Reducer NEW 0

TEIJIN SEIKI (NABTESCO) RV-380A2-141 VIGODRIVE Gear Reducer NEW

$1,500.00

Availability:

1 in stock

SKU: IGAM1480088

New Teijin Seiki (Nabtesco) RV-380A2-141 VIGODRIVE precision gear reducer configured for high-torque, low-backlash motion control in industrial automation and robotics systems. This unit utilizes a cycloidal reduction mechanism and provides a 141:1 reduction ratio, supporting high-load, rigid drive applications for robotic joints, indexing systems, and precision positioning assemblies.

BOSCH REXROTH 253183 DeviceNet Weld Controller PARTS ONLY 0

BOSCH REXROTH 253183 DeviceNet Weld Controller PARTS ONLY

$1,500.00

Availability:

1 in stock

SKU: IGAM0031091

FANUC - R-30iA PARTS ONLY 0

FANUC – R-30iA PARTS ONLY

$1,500.00

Availability:

1 in stock

SKU: IGAM0030248

2007 FANUC R-30iA CONTROLLER; USED 0

2007 FANUC R-30iA CONTROLLER; USED

$1,500.00

Availability:

1 in stock

SKU: IGAM1980548

USED FANUC A05B‑2510‑B130 Robot Controller from the R‑30iA series. This controller is designed for operating FANUC industrial robots and provides motion control, processing capability, and system management within automated production environments. The nameplate lists a 200–230V AC 3‑phase power requirement and a 12 kVA load capacity.

MAGUIRE MLS‑280 Clear‑Vu Vacuum Loader USED 0

MAGUIRE MLS‑280 Clear‑Vu Vacuum Loader USED

$1,500.00

Availability:

1 in stock

SKU: IGAM2450051

This listing is for a USED Maguire MLS‑280 Clear‑Vu vacuum loader. This unit is designed to convey and load plastic resin using a vacuum‑based material handling system. It is commonly used in plastics processing environments to transfer material from storage to processing equipment such as injection molding machines or extruders.

ATLAS COPCO BCP BL‑2‑I06 Battery Screwdriver 8431127300 NEW 0

ATLAS COPCO BCP BL‑2‑I06 Battery Screwdriver 8431127300 NEW

$1,500.00

Availability:

4 in stock

SKU: IGAM3100024

This listing is for a NEW Atlas Copco BCP BL‑2‑I06 Battery Screwdriver, part number 8431127300. It is designed for precision screwdriving and light‑duty industrial assembly. This unit is categorized as a cordless electric screwdriver and includes lithium‑ion battery compatibility, ergonomic pistol grip body, and a clutch‑based shutoff system with hex‑female output.

BALLYMORE ROLLING LADDER AND WORK PLATFORM USED 0

BALLYMORE ROLLING LADDER AND WORK PLATFORM USED

$1,500.00

Availability:

1 in stock

SKU: IGAM3100009

This listing is for a used Ballymore rolling ladder and work platform.
This unit is designed for elevated access in warehouse, industrial, or maintenance environments and features an integrated stair section, guard rails, and rolling base.

See photos for details.

Part No: Not specified
Manufacturer: Ballymore
Type: Rolling Ladder / Work Platform
Condition: USED
Construction: Steel frame
Mobility: Rolling base with casters
Application: Warehouse and industrial access

Item shows cosmetic wear from prior industrial use. Unit is shown folded/laid down for storage or transport. No load testing or certification has been performed.

ATLAS COPCO BCP BL‑2‑I06 Battery Screwdriver 8431127300 NEW 0

ATLAS COPCO BCP BL‑2‑I06 Battery Screwdriver 8431127300 NEW

$1,500.00

Availability:

2 in stock

SKU: IGAM3100025

This listing is for a NEW Atlas Copco BCP BL‑2‑I06 Battery Screwdriver, part number 8431127300. It is designed for precise torque‑controlled fastening in assembly and production environments. This unit is categorized as a cordless electric screwdriver and includes an ergonomic Tensor‑style form factor, battery‑powered operation, and compatibility with Atlas Copco industrial fastening workflows.

UNION PROCESS Type B Size 01HD Szegvari Attritor System USED 0

UNION PROCESS Type B Size 01HD Szegvari Attritor System USED

$1,500.00

Availability:

1 in stock

SKU: IGAM2880022

This listing is for a USED Union Process Szegvari Attritor System, Type B, Size 01HD. It is designed for laboratory and pilot‑scale grinding, dispersion, and de‑agglomeration of materials. This unit is categorized as a stirred media attritor mill and includes OEM‑verified capabilities such as small‑volume batch processing, fine‑grinding performance, and compatibility with wet or dry operation. The 01HD series is widely used for research, quality control, and small‑batch material development.

FLOORCARE.BIZ X20B 20" Walk‑Behind Auto Scrubber USED 0

FLOORCARE.BIZ X20B 20″ Walk‑Behind Auto Scrubber USED

$1,500.00

Availability:

1 in stock

SKU: IGAM2740125

This listing is for a USED Floorcare.biz X20B walk‑behind auto scrubber. It is designed for commercial and industrial floor cleaning applications. This self‑propelled scrubber offers a 20‑inch cleaning path, integrated recovery and solution tanks, and reliable scrubbing performance suitable for concrete, tile, epoxy, laminate, and similar surfaces. It is a durable cleaning unit built to handle medium‑to‑large floor areas efficiently.

SQUARE D 45T3H 45 KVA 3‑Phase Insulated Transformer 480V - 208Y/120V USED 0

SQUARE D 45T3H 45 KVA 3‑Phase Insulated Transformer 480V – 208Y/120V USED

$1,500.00

Availability:

1 in stock

SKU: IGAM3290003

This listing is for a USED Square D 45T3H 45 kVA three‑phase insulated transformer. It is designed for stepping 480V primary voltage down to 208Y/120V for commercial and industrial power distribution systems. This unit is categorized as a dry‑type distribution transformer and includes capabilities such as 45 kVA power rating, AA cooling, 150°C rise, and adjustable high‑voltage taps for voltage optimization.

PERKIN ELMER LAMBDA 35 UV/VIS L600000C SPECTROPHOTOMETER USED USED 0

PERKIN ELMER LAMBDA 35 UV/VIS L600000C SPECTROPHOTOMETER USED USED

$1,500.00

Availability:

1 in stock

SKU: IGAM2160045

This listing is for a used PerkinElmer Lambda 35 UV/VIS spectrophotometer.

Unit was removed from service and shows normal cosmetic wear from use. Functional testing beyond basic inspection has not been performed.

See photos for details.

Part No: Lambda 35
Type: UV/VIS Spectrometer
Condition: USED
Manufacturer: PerkinElmer
Electrical: 100–240 VAC / 50–60 Hz
Application: Laboratory analysis, quality control, material testing

Sankyo UCMSNR-70-15-NGD Manual Precision Clamp Fixture (Lot of 4) NEW 0

Sankyo UCMSNR-70-15-NGD Manual Precision Clamp Fixture (Lot of 4) NEW

$1,500.00

Availability:

1 in stock

SKU: iGAM1980733

This listing is for a NEW LOT OF 4 Sankyo UCMSNR-70-15-NGD units. Manufactured by Sankyo Oilless Industry, these precision mechanical clamp fixtures provide repeatable locating, positioning, and workholding functions for automation equipment, assembly systems, transfer applications, and machine tooling installations. Each assembly incorporates a compact locking mechanism and precision-machined construction intended for fixture and tooling integration.

MOORE #3 JIG Grinder USED 0

MOORE #3 JIG Grinder USED

$1,500.00

Availability:

1 in stock

SKU: IGAM3180011

This listing is for a USED MOORE #3 Jig Grinder. It is designed for precision grinding of holes and complex shapes in metal components. This unit is categorized as a Manual Jig Grinding Machine and includes capabilities such as high-accuracy positioning, adjustable spindle speeds, and compatibility with various grinding heads.

LASAG KLS 126 Laser Welding System USED 0

LASAG KLS 126 Laser Welding System USED

$1,500.00

Availability:

1 in stock

SKU: IGAM3190005

MECCOMARK 20W FIBER LASER MARKING SYSTEM MISSING CIRCUIT BOARD USED 0

MECCOMARK 20W FIBER LASER MARKING SYSTEM MISSING CIRCUIT BOARD USED

$1,500.00

Availability:

1 in stock

SKU: IGAM0770020