All Products - Page 39 of 438 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Sort By:

EATON V48M28T1216 15 kVA Dry Type Distribution Transformer USED 0

EATON V48M28T1216 15 kVA Dry Type Distribution Transformer USED

$1,850.00

Availability:

1 in stock

SKU: IGAM3760028

This listing is for a USED Eaton V48M28T1216. This unit is designed to serve as a three‑phase dry‑type distribution transformer used to step down voltage from 480V systems to 208Y/120V for industrial and commercial electrical power distribution. It is commonly applied to supply power to equipment, panels, and facility branch circuits.

EATON V48M28T1216 15 kVA Dry Type Distribution Transformer USED 0

EATON V48M28T1216 15 kVA Dry Type Distribution Transformer USED

$1,850.00

Availability:

1 in stock

SKU: IGAM3760026

This listing is for a USED Eaton V48M28T1216. This unit is designed to serve as a three‑phase dry‑type distribution transformer used to step down voltage from 480V systems to 208Y/120V for industrial and commercial electrical applications. It is commonly applied to supply power to equipment, panels, and facility distribution loads.

EATON V48M28T1216 15 kVA Dry Type Distribution Transformer USED 0

EATON V48M28T1216 15 kVA Dry Type Distribution Transformer USED

$1,850.00

Availability:

1 in stock

SKU: IGAM3760029

This listing is for a USED Eaton V48M28T1216. This unit is designed to serve as a three‑phase dry‑type distribution transformer used to step down voltage for industrial and commercial electrical systems. It is commonly applied to supply 208Y/120V power from higher voltage sources for equipment, panels, and facility loads.

TOX PRESSOTECHNIK SMB 002.026.A.002 30kN Power Press Unit USED 0

TOX PRESSOTECHNIK SMB 002.026.A.002 30kN Power Press Unit USED

$1,850.00

Availability:

1 in stock

SKU: IGAM2840257

Used TOX Pressotechnik SMB 002.026.A.002 power press configured for generating controlled pressing force in industrial assembly and joining operations. This unit integrates a TOX HZL series power cylinder within a guarded frame structure, delivering up to 30 kN force with 80 mm stroke for use in automated stations and fixture-mounted applications.

ARO 6662B3‑3EB‑C 2″ Air Operated Diaphragm Pump -120 PSI - NEW 0

ARO 6662B3‑3EB‑C 2″ Air Operated Diaphragm Pump -120 PSI – NEW

$1,850.00

Availability:

1 in stock

SKU: IGAM2840043

This listing is for a NEW ARO 6662B3-3EB-C. It is used for fluid transfer and pumping applications in industrial environments. This unit includes a 2 inch inlet/outlet configuration, air-operated double diaphragm design, and maximum working pressure of 120 psig (8.3 bar), allowing flow of liquids such as chemicals, coatings, and water-based materials.

ALLEN BRADLEY 2198-D006-ERS4 DUAL AXIS INVERTER USED 0

ALLEN BRADLEY 2198-D006-ERS4 DUAL AXIS INVERTER USED

$1,850.00

Availability:

3 in stock

SKU: IGAM0260560

ALLEN BRADLEY 20G11ND027JA0NNNNN SER A USED 0

ALLEN BRADLEY 20G11ND027JA0NNNNN SER A USED

$1,850.00

Availability:

1 in stock

SKU: IGAM0260552

The ALLEN BRADLEY 20G11 ND027 JA0NNNNN Drive Series A is a high-performance PowerFlex 755 AC drive designed for precise motor control and energy efficiency in industrial applications. Manufactured in 2021 and in used condition, this drive offers reliable performance, advanced motor control features, and seamless integration with automation systems. It is an ideal choice for manufacturing, material handling, and energy-saving motor applications.

Featured

FANUC A06B-1428-B100 SERVO MOTOR NEW IN CRATE 0

FANUC A06B-1428-B100 SERVO MOTOR NEW IN CRATE

Availability:

1 in stock

SKU: IGAM0450081

The FANUC A06B-1428-B100 Servo Motor is a new industrial-grade servo motor, shipped in its original crate for maximum protection and readiness for integration. Built for precision and endurance, this high-performance motor is part of FANUC’s trusted Alpha series, widely used in CNC machining centers and automated production environments. The A06B-1428-B100 offers exceptional torque, speed control, and reliability, making it a preferred choice for manufacturers demanding accuracy and consistent operation in high-load applications.

FANUC A660‑4004‑T964#L30R53 Interface Cable NEW 1

FANUC A660‑4004‑T964#L30R53 Interface Cable NEW

Availability:

2 in stock

SKU: IGAM1980796

This listing is for a NEW FANUC interface cable, part number A660‑4004‑T964#L30R53. This cable assembly is designed for use with FANUC CNC and automation systems to provide reliable signal transmission between control components. FANUC interface cables of this type are commonly used in CNC machines and industrial automation equipment where proper connector fit and signal integrity are required.

ALLEN-BRADLEY 1752-L24BBB SmartGuard 600 Safety Controller NEW 0

ALLEN-BRADLEY 1752-L24BBB SmartGuard 600 Safety Controller NEW

$1,800.00

Availability:

7 in stock

SKU: IGAM2781348

This listing is for a NEW Allen-Bradley 1752-L24BBB. The SmartGuard 600 safety controller combines standard control and safety control functions within a compact platform for machine safeguarding and automation applications. The controller is used for safety monitoring, emergency stop functions, guard interlock systems, and safety logic execution in industrial control environments.

GALLMEYER & LIVINGSTON 550 RECIPORCATING SURFACE GRINDER USED 0

GALLMEYER & LIVINGSTON 550 RECIPORCATING SURFACE GRINDER USED

Availability:

1 in stock

SKU: IGAM2280002

WINSLOW ENGINEERING E300 DRILL POINT GRINDER USED 0

WINSLOW ENGINEERING E300 DRILL POINT GRINDER USED

Availability:

1 in stock

SKU: IGAM1420004

The Winslow Engineering E300 Drill Point Grinder is a used precision sharpening machine engineered for high-accuracy drill point grinding and reconditioning. Designed for tool rooms, manufacturing plants, and regrinding operations, the E300 offers consistent and repeatable sharpening of a wide range of drill bit sizes and geometries. This unit includes a crate of tooling for added versatility; however, note that the electrical cabinet is missing a component, and the machine may require repair or retrofitting before use.

PRM PR65M618B Surface Grinding Machine NEW 0

PRM PR65M618B Surface Grinding Machine NEW

Availability:

1 in stock

SKU: IGAM3960001

This listing is for a NEW PRM surface grinding machine, model PR65M618B. The machine is a manual surface grinder designed for precision grinding operations on flat workpieces. It features a rectangular magnetic chuck table, vertical spindle head, manual handwheel controls, and separate auxiliary equipment including a dust collector and vacuum pump assembly. This type of grinder is commonly used in toolrooms, maintenance shops, and light industrial grinding applications.

REXROTH 0-608-740-201 Interconnect Signal Cable NEW 4

REXROTH 0-608-740-201 Interconnect Signal Cable NEW

$1,800.00

Availability:

4 in stock

SKU: IGAM2840119

This listing is for a New Bosch Rexroth interconnect signal cable, part number 0 608 740 201. It is a factory‑terminated cable designed for use with Rexroth automation and control systems. This cable is supplied new in original Rexroth packaging and is intended for signal or power connectivity between compatible Rexroth components and equipment.

YASKAWA JZNC‑XPP40E‑2 Teach Pendant USED 0

YASKAWA JZNC‑XPP40E‑2 Teach Pendant USED

$1,800.00

Availability:

1 in stock

SKU: IGAM3540020

This listing is for a USED Yaskawa JZNC‑XPP40E‑2 teach pendant. It is designed for programming, setup, and operation of Yaskawa industrial robot systems, including use in hazardous locations when installed per Yaskawa specifications. This unit is classified as an intrinsically safe programming pendant, includes the handheld pendant, integrated keypad and display, enabling switch, emergency stop, and attached communication cable, and shows cosmetic wear consistent with industrial use.

REXROTH 0‑608‑740‑201 AL005 Interconnect Cable (5m) NEW 9

REXROTH 0‑608‑740‑201 AL005 Interconnect Cable (5m) NEW

$1,800.00

Availability:

1 in stock

SKU: IGAM2840112

This listing is for a NEW Rexroth 0‑608‑740‑201 AL005 Interconnect Cable. It is designed as a 5‑meter connecting cable for Bosch Rexroth ErgoSpin tools, providing stable signal and power transmission between the tool and its controller. This unit is categorized as an industrial automation interconnect cable and features rugged construction suitable for demanding manufacturing environments.

SIEMENS 6AV6644-0AB01-2AX0 SIMATIC MP 377 15" Touch Panel NEW NO BOX 0

SIEMENS 6AV6644-0AB01-2AX0 SIMATIC MP 377 15″ Touch Panel NEW NO BOX

$1,800.00

Availability:

1 in stock

SKU: IGAM1910536

This listing is for a NEW (No Box) Siemens 6AV6644‑0AB01‑2AX0 SIMATIC MP 377 15″ Touch Panel. This operator interface is designed for industrial automation environments requiring a rugged, high‑performance HMI. The unit offers a 15-inch touch display, supports Class I/Div 2 hazardous locations, and is designed for indoor use with Type 4X/12 watertight enclosure protection. Input rating is 24V DC with an operating temperature range of 0°C to 50°C (vertical installation).

Quincy QR‑325 150919‑133 80 Gal. 5 HP Two‑Stage Air Compressor USED 0

QUINCY QR‑325 150919‑133 80 Gal. 5 HP Two‑Stage Air Compressor USED

Availability:

1 in stock

SKU: IGAM3310010

This listing is for a USED Quincy QR‑325 industrial air compressor, model 150919‑133, equipped with a two‑stage pressure‑lubricated pump and mounted on an 80‑gallon Manchester Tank air receiver. Quincy’s QR‑325 series is designed for heavy‑duty, high‑demand applications and is widely known for its durability, long service life, and 100% duty cycle capability. This 5‑HP, 80‑gallon configuration provides reliable compressed air delivery suitable for manufacturing, shops, and general industrial environments. **Unit has a broken fitting and dial as seen in photos**

AIS Tool Tracker System USED 9

AIS Tool Tracker System USED

Availability:

1 in stock

SKU: IGAM3230001

This listing is for a USED AIS Tool Tracker System, originally designed for industrial assembly and tool management applications. This system includes 5 cameras, 4 ESTIC impact guns, 8 ESTIC rechargeable batteries, 1 ESTIC Handy 2000 cordless controller, 1 Dynics screen, and a main panel. It is categorized as an automated tool tracking and control system, featuring integrated vision tracking, torque monitoring, and centralized control for assembly operations.

Note: This product ships from Tilbury ON, Canada. Additional fees may apply for international delivery. Please contact for more details.

DONGAN ES-11230.326 2.0 KVA Single Phase Transformer NEW 3

DONGAN ES-11230.326 2.0 KVA Single Phase Transformer NEW

$1,800.00

Availability:

1 in stock

SKU: IGAM2780226

This listing is for a NEW DONGAN ES-11230.326. It is designed for general-purpose single-phase power conversion in industrial and commercial environments. This unit is categorized as a Class I general use transformer and includes the following capabilities: 2.0 KVA rating, 380–575V primary voltage, and 110/115/120V secondary voltage.

TECHNIKS 600 ShrinkPRO High-Performance ShrinkFIT Machine USED 0

TECHNIKS 600 ShrinkPRO High-Performance ShrinkFIT Machine USED

Availability:

1 in stock

SKU: IGAM2600004

This listing is for a USED TECHNIKS 600 ShrinkPRO. It is designed for high-performance shrink fit tool holding applications in CNC machining environments. This unit is categorized as a shrink fit machine and includes the following capabilities: rapid tool changes, compatibility with multiple holder types, and compact footprint for shop floor integration.

SCOTCHMAN 5075 50 TON PUNCH CAPACITY IRONWORKER USED 0

SCOTCHMAN 5075 50 TON PUNCH CAPACITY IRONWORKER USED

Availability:

1 in stock

SKU: IGAM1810029

The Scotchman 5075 is a widely used and respected hydraulic ironworker, suitable for various metalworking tasks in industries like construction, manufacturing, and metal fabrication.

Key features and specifications:

50 Ton Punching Capacity: Capable of punching holes up to 1-1/4″ in 1/2″ thickness and 13/16″ in 3/4″ thickness.
Bar Shear: Shears up to 24 inches wide and 3/16 inch thick, or 6 inches wide and 3/4 inch thick, without blade adjustments. Optional 12 or 24 inch blade lengths are available.
7.5 inch open end throat: Provides generous space for manipulating materials.
Stroke Control: Adjusts cutting and punching actions for optimal tool clearance and stroke rate.
Automatic Hydraulic Relief Valve: Protects the machine from overloading.
Tool Table: Machined work area for mounting quick change component tooling.
Quick Change Tooling: Optional tooling is available for shearing rod, angle, channel, and brakes.
Motor: Typically 5 HP.
Strokes per Minute: 30 (light material).
Dimensions: Approximately 27.5”W x 54”L x 65”H.
Weight: Approximately 2200 lbs.
Hydraulic Operating Pressure: 2500 PSI.

K.O. LEE BA960 TOOL CUTTER/GRINDER USED 0

K.O. LEE BA960 TOOL CUTTER/GRINDER USED

$1,800.00

Availability:

1 in stock

SKU: IGAM2020005

K.O. LEE BA860 TOOL CUTTER AND GRINDER USED 0

K.O. LEE BA860 TOOL CUTTER AND GRINDER USED

$1,800.00

Availability:

1 in stock

SKU: IGAM2020004

PHILIPS TOPAZ PA130910 SMT Screen Printer USED 0

PHILIPS TOPAZ PA130910 SMT Screen Printer USED

Availability:

1 in stock

SKU: IGAM2030004

This listing is for a USED Philips TOPAZ PA130910 screen printer. The TOPAZ platform is an automated printing system used in electronics manufacturing lines for controlled material deposition onto printed circuit assemblies. The machine incorporates conveyorized board handling, programmable motion control, pneumatic operation, and integrated operator controls for production environments supporting PCB assembly processes.

WEISS CR0500E-0K ROTARY INDEXER USED 0

WEISS CR0500E-0K ROTARY INDEXER USED

Availability:

2 in stock

SKU: IGAM0170083

The WEISS CR0500E-0K Rotary Indexer is a precision-engineered indexing table built for high-speed, repeatable positioning in automated production environments. This used unit offers reliable servo-controlled rotary motion and is well-suited for integration into robotic, packaging, or assembly lines. Known for its compact footprint and robust design, the CR0500E-0K delivers smooth, backlash-free operation ideal for high-cycle applications.

MILLER DialArc HF TIG Welder w/ Radiator‑1 Cooler USED 0

MILLER DialArc HF TIG Welder w/ Radiator‑1 Cooler USED

$1,795.00

Availability:

1 in stock

SKU: IGAM3290006

This listing is for a USED Miller DialArc HF TIG Welder with Radiator‑1 cooler. It is designed for AC/DC high‑frequency arc starting and precision TIG welding across a wide range of materials. This unit is categorized as an industrial TIG power source and includes capabilities such as high‑frequency stabilization, AC/DC weld output, and an integrated water cooler for torch cooling performance.

ALLEN BRADLEY 150‑B135NBD Solid State Controller 100HP 135A USED 0

ALLEN BRADLEY 150‑B135NBD Solid State Controller 100HP 135A USED

$1,780.00

Availability:

1 in stock

SKU: IGAM2840106

This listing is for a USED Allen‑Bradley 150‑B135NBD SMC Dialog Plus solid‑state motor controller. It is designed for soft starting and stopping of three‑phase motors up to 100HP and supports a continuous current rating of 135A. This unit is categorized as a solid‑state soft starter and includes capabilities such as multi‑voltage input (208–480V), programmable protection features, and intelligent motor control functions.

BANNER SLLCP23-770-S Light Curtain Set 770mm 23mm NEW 0

BANNER SLLCP23-770-S Light Curtain 770mm 23mm NEW

$1,775.00

Availability:

6 in stock

SKU: IGAM3220233

DAIKIN SUT00D6021-30 61.1L/Min Hydraulic Power Pack USED 0

DAIKIN SUT00D6021-30 61.1L/Min Hydraulic Power Pack USED

Availability:

1 in stock

SKU: IGAM1700214

This listing is for a used Daikin SUT00D6021 30 Super Unit Inverter Hydraulic Unit.
Hydraulic unit used in inverter systems for precise fluid control.

Item is clean and was removed from a working system. See photos for details.

Part No: SUT00D6021-30
Type: Hydraulic Unit
Condition: USED

Please message us with any questions.