All Products - Page 22 of 438 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Sort By:

Sealed Air F5AC Wrapper USED 0

Sealed Air F5AC Wrapper USED

$5,000.00

Availability:

1 in stock

SKU: IGAM4140010

This listing is for a USED Sealed Air F5AC. This wrapper is intended for continuous film wrapping operations within automated packaging lines. The system incorporates conveyor-fed product handling, film management components, a sealing section, and an integrated operator interface for packaging applications commonly found in manufacturing, fulfillment, and contract packaging environments.

NORTH AMERICAN 1615-E Butterfly Valve & Actuator Assembly NEW 0

NORTH AMERICAN 1615-E Butterfly Valve & Actuator Assembly NEW

$5,000.00

Availability:

1 in stock

SKU: IGAM4330003

This listing is for a NEW North American 1615-E butterfly valve and actuator assembly. Manufactured by North American Manufacturing Company, this valve assembly combines a butterfly valve with a factory-mounted actuator for automated flow control and shutoff applications. The assembly is commonly used in combustion air, fuel gas, industrial heating, and process control systems where reliable quarter-turn valve operation is required.

HMD KONTRO CS2ESH Sealless Centrifugal Pump NEW 0

HMD KONTRO CS2ESH Sealless Centrifugal Pump NEW

$5,000.00

Availability:

1 in stock

SKU: IGAM4330012

This listing is for a NEW HMD Kontro CS2ESH. The CS2ESH is a sealless centrifugal pump designed for fluid transfer applications where containment of the process media is critical. As part of the HMD Kontro magnetic drive pump product family, it is commonly utilized in chemical processing, petrochemical, and industrial fluid handling systems.

SPX Lightnin 781-C-50 Mixer Drive USED 0

SPX Lightnin 781-C-50 Mixer Drive USED

$5,000.00

Availability:

1 in stock

SKU: IGAM4330007

This listing is for a USED SPX Lightnin 781-C-50. The unit provides mechanical power transmission for industrial mixing and agitation equipment used in process industries. Manufactured by SPX Flow Technology under the Lightnin brand, this mixer drive is designed for integration with agitator systems used in blending, suspension, and process vessel applications.

400 Gallon Process Tank Assembly w/ DP Pumps DPVF 15/4 C & Fil-Trek Filter USED 0

400 Gallon Process Tank Assembly w/ DP Pumps DPVF 15/4 C & Fil-Trek Filter USED

$5,000.00

Availability:

1 in stock

SKU: IGAM0070081

This listing is for a USED Process Tank Assembly. The skid-mounted system incorporates a polyethylene process tank, DP Pumps DPVF 15/4 C vertical multistage centrifugal pump, Fil-Trek filtration housing, PVC process piping manifold, and WEG control enclosure. The assembly is configured for liquid storage, recirculation, filtration, water treatment, and industrial process fluid handling applications.

ABC Packaging Machine Corp Automatic Carton Sealer with Infeed Conveyor USED 0

ABC Packaging Machine Corp Automatic Carton Sealer with Infeed Conveyor USED

$5,000.00

Availability:

1 in stock

SKU: IGAM3470094

This listing is for a USED ABC Packaging Machine Corp automatic carton sealing machine with integrated conveyor. Provides carton transport and top sealing within packaging lines, incorporating a belt-driven infeed, guarded sealing enclosure, pneumatic valve manifold, and electrical control panel operating at 480 volts for continuous-duty packaging applications.

BAUM 18 High‑Speed Paper Folding Machine USED 0

BAUM 18 High‑Speed Paper Folding Machine USED

$5,000.00

Availability:

1 in stock

SKU: IGAM3970006

This listing is for a USED Baum 18 paper folding machine. This unit is designed to fold printed sheets using a friction‑feed system with adjustable folding plates for multiple fold styles. It is commonly applied in commercial print shops and finishing departments where consistent, high‑speed folding is required for brochures, inserts, and production print work.

CONAIR FRANKLIN CH14-2 Three Hopper Drying System USED 0

CONAIR FRANKLIN CH14-2 Three Hopper Drying System USED

$5,000.00

Availability:

1 in stock

SKU: IGAM4010021

This listing is for a USED CONAIR FRANKLIN CH14-2. This unit is designed to provide material drying and handling through a multi-hopper configuration for plastic processing systems. It is commonly applied in injection molding and extrusion operations requiring centralized resin drying with integrated distribution across multiple hopper vessels.

UNA-DYN FC-XMH Dual Hopper Material Drying and Conveying System USED 0

UNA-DYN FC-XMH Dual Hopper Material Drying and Conveying System USED

$5,000.00

Availability:

1 in stock

SKU: IGAM3980003

This listing is for a USED Una‑Dyn FC‑XMH dual hopper material drying and conveying system. This unit is designed to serve as a centralized resin handling system used to receive, condition, and transfer plastic material to downstream processing equipment. The system utilizes dual stainless steel hoppers with vacuum conveying lines feeding top-mounted receivers and discharging through integrated bottom outlets with a central piping manifold.

DORSEY METROLOGY 16H Optical Comparator USED 0

DORSEY METROLOGY 16H Optical Comparator USED

$5,000.00

Availability:

1 in stock

SKU: IGAM3890004

This listing is for a USED Dorsey Metrology 16H optical comparator. The Dorsey Metrology 16H is a floor‑mounted optical measurement system designed for precision inspection and dimensional verification of machined parts. The system uses projected magnified images on a large screen to allow accurate measurement and comparison of part geometry and profiles. This unit is equipped with a Quadra‑Chek 2000 digital readout for X‑Y measurement and data display and is commonly used in quality control and inspection environments.

YODOGAWA MACHINERY CO. YMR‑840 Radial Drilling Machine USED 0

YODOGAWA MACHINERY CO. YMR‑840 Radial Drilling Machine USED

$5,000.00

Availability:

1 in stock

SKU: IGAM3780001

This listing is for a USED Yodogawa Machinery Co. radial drilling machine, model YMR‑840. The machine is a heavy‑duty radial drilling unit designed for drilling operations on large or heavy workpieces where adjustable arm reach and spindle positioning are required. It features a vertical column, horizontally adjustable radial arm, integrated electric drive motors, and a robust cast iron base suitable for industrial machining environments.

Rexroth HCS03.1E-W0150-A-05-NNBV & HNK01.1A-A075-E0106-A-500 USED 0

Rexroth HCS03.1E-W0150-A-05-NNBV & HNK01.1A-A075-E0106-A-500 USED

$5,000.00

Availability:

1 in stock

SKU: IGAM3160016

This listing is for a USED Bosch Rexroth IndraDrive power supply package consisting of an HCS03.1E-W0150-A-05-NNBV control power supply and an HNK01.1A-A075-E0106-A-500-NNNNN line reactor. Together, these components provide power handling, DC control supply generation, and line conditioning functions within Rexroth IndraDrive motion-control systems used in CNC machinery, automation equipment, material handling systems, and industrial manufacturing applications.

PROTECH SP16L SNOW PLOW USED 0

PROTECH SP16L SNOW PLOW USED

$5,000.00

Availability:

1 in stock

SKU: IGAM0160012

IPG YLR-1000-MM-WC FIBER LASER USED 0

IPG YLR-1000-MM-WC FIBER LASER USED

Availability:

2 in stock

SKU: IGAM1720005

ROYAL RA5060002 HIGH SPEED CNC LATHE SPINDLE MOTOR 6000 RPM A2-5 NIB 0

ROYAL RA5060002 HIGH SPEED CNC LATHE SPINDLE MOTOR 6000 RPM A2-5 NIB

Availability:

2 in stock

SKU: IGAM0450131

10" X .075" GUILD MODEL #VE-10 SHEAR END WELDER WITH LINCOLN TIG175 WELDER USED 0

10″ X .075″ GUILD MODEL #VE-10 SHEAR END WELDER WITH LINCOLN TIG175 WELDER USED

$4,950.00

Availability:

1 in stock

SKU: IGAM3530002

2,500 LBS LITTELL MODEL #60 MOTORIZED UNCOILER COIL REEL USED 0

2,500 LBS LITTELL MODEL #60 MOTORIZED UNCOILER COIL REEL USED

$4,950.00

Availability:

1 in stock

SKU: IGAM3090004

AVON ENGINEERING 18,000LB CAP LIFTING TONG 0

AVON ENGINEERING 18,000LB CAP LIFTING TONG

$4,950.00

Availability:

1 in stock

SKU: IGAM0480057

ABB 2500A Spectra Series Copper Center Tap Box 600V, 3PH, 3G NEW 0

ABB 2500A Spectra Series Copper Center Tap Box 600V, 3PH, 3G NEW

Availability:

9 in stock

SKU: IGAM0031076

The ABB 2500A Spectra Series Copper Center Tap Box is a new high-capacity power distribution component designed for 600V, 3-phase electrical systems with a 3G (three conductors plus ground) configuration. Built with high-conductivity copper bus bars and engineered to integrate with ABB’s Spectra Series busway systems, this center tap box delivers efficient and balanced current distribution for commercial and industrial power networks. It is ideal for facilities requiring a centralized tap-off point to streamline energy management and reduce voltage drop across large installations.

Hewlett-Packard 8564E Spectrum Analyzer 9kHz-40GHz USED 0

Hewlett-Packard 8564E Spectrum Analyzer 9kHz-40GHz USED

$4,900.00

Availability:

1 in stock

SKU: IGAM4180067

This listing is for a USED Hewlett-Packard 8564E Spectrum Analyzer. The 8564E provides RF and microwave spectrum analysis from 9 kHz to 40 GHz for communications, laboratory, calibration, EMI, and RF development environments. This configuration includes IEEE-488 connectivity, external reference capability, video output, gate interfaces, and an installed HP 85620A Mass Memory Module.

ALFA LAVAL CP‑3 PN10 Mixproof 3‑Way Valve USED 0

ALFA LAVAL CP‑3 PN10 Mixproof 3‑Way Valve w/ ThinkTop V70 USED

$4,800.00

Availability:

9 in stock

SKU: IGAM2840325

This listing is for a USED Alfa Laval CP‑3 PN10 Mixproof 3‑Way Valve. It is designed for hygienic fluid handling applications where two different products must be managed simultaneously without risk of cross‑contamination. This unit is categorized as a sanitary mixproof valve and features a double seat, double block‑and‑bleed design with pneumatic actuation, making it suitable for dairy, food, beverage, and other hygienic process systems.

GRACO 16V133 G‑Flex 1500 Parts Feeder USED 0

GRACO 16V133 G‑Flex 1500 Parts Feeder USED

$4,800.00

Availability:

1 in stock

SKU: IGAM3540003

This listing is for a USED Graco 16V133 G‑Flex 1500 Parts Feeder. This flexible feeding system is designed for automated part sorting and presentation applications. It features a variable‑frequency table and hopper arrangement, 120 VAC operation, and dual control modules for system tuning. This unit belongs to Graco’s G‑Flex 1500 series and provides vibration‑based part feeding for pick‑and‑place automation, material handling, and assembly lines.

2006 BALDOR TS35 70 Gal. Towable Diesel Generator USED 0

BALDOR SB2S-70 TS35 70 GALLON DIESEL GENERATOR 340 HOURS TRAILER MOUNTED USED

Availability:

1 in stock

SKU: IGAM3450001

This listing is for a used Baldor SB2S-70 TS35 diesel generator set.
This unit is a trailer-mounted industrial generator package equipped with a 70-gallon fuel tank and sound-attenuated enclosure.

See photos for details.

Part No: SB2S-70
Model: TS35
Type: Trailer Mounted Diesel Generator
Condition: USED
Run Hours: 340
Fuel Type: Diesel
Fuel Tank Capacity: 70 Gallons
Manufacture Date: 05/2006
Phase: 1
Standard Vent Size: 2″ NPT
Tank Material: 10 Gauge Steel
Channel Material: 7 Gauge Steel
Baldor Part No: TA0000C76

ALLIANT 42VC VERTICAL MILLS USED 0

ALLIANT 42VC VERTICAL MILLS USED

$4,800.00

Availability:

1 in stock

SKU: IGAM2200008

New Arrival

DEKKER 98150237SG Vacuum Pump 5.5HP USED 0

DEKKER 98150237SG Vacuum Pump 5.5HP USED

$4,750.00

Availability:

1 in stock

SKU: IGAM4070003

This listing is for a USED Dekker 98150237SG Vacuum Pump System. The system combines a Dekker vacuum pump, Lafert 5.5 HP drive motor, Solberg intake filtration assembly, and SMC electronic flow monitoring hardware in a floor-mounted package for industrial vacuum generation applications. Common installations include packaging equipment, vacuum hold-down systems, automation equipment, material handling systems, and process manufacturing operations.

Vale-Tech Integra 2 Industrial Weighing Workstation with 10kg Scale Platform USED 0

Vale-Tech Integra 2 Industrial Weighing Workstation with 10kg Scale Platform USED

$4,750.00

Availability:

1 in stock

SKU: IGAM3470083

This listing is for a USED Vale‑Tech Integra 2. It provides an integrated industrial weighing workstation combining a platform scale, sealed operator keyboard, and display interface for weight capture and data entry applications. This system supports operator-driven weighing processes with a stainless platform, membrane keypad input, and external monitor interface suited for packaging, verification, and production environments.

LOCTITE MM31 DUAL CARTRIDGE PUSHER W/ MM25 CONTROLLER 400ML DISPENSER USED 0

LOCTITE MM31 DUAL CARTRIDGE PUSHER W/ MM25 CONTROLLER 400ML DISPENSER USED

Availability:

2 in stock

SKU: IGAM1700177

This listing is for a USED LOCTITE MM31 Dual Cartridge Pusher with MM25 Controller.

Industrial-grade adhesive dispensing system designed for use with LOCTITE 400ml dual cartridges. Ideal for precision application of 2-part adhesives including MMAs, epoxies, and silicones.

See photos for details.

Part No: MM31 / MM25
Type: Dual Cartridge Dispensing System
Condition: USED
Includes MM31 Applicator and MM25 Controller
Compatible with LOCTITE Dual Rotor Pump
Cartridge Size: 400 ml (13 oz)
RoHS Compliant
Please message us with any questions.

FANUC M‑16iB/20 Complete w/ R‑J3iB Controller USED 0

FANUC M‑16iB/20 Complete w/ R‑J3iB Controller USED

$4,550.00

Availability:

1 in stock

SKU: IGAM0270004

This listing is for a USED FANUC M‑16iB/20 industrial robot system sold complete with a FANUC R‑J3iB controller and teach pendant. The M‑16iB/20 is a 6‑axis articulated robot designed for medium‑payload industrial automation applications such as material handling, machine tending, and general robotic operations.

New Arrival

FANUC ARC Mate 120iC with R-30iB Controller FOR PARTS / NOT WORKING 0

FANUC ARC Mate 120iC with R-30iB Controller FOR PARTS / NOT WORKING

$4,500.00

Availability:

1 in stock

SKU: IGAM2261002

This listing is for a FOR PARTS / NOT WORKING FANUC ARC Mate 120iC robot with R-30iB controller. The system was originally configured for robotic automation and material handling applications utilizing the ARC Mate platform and FANUC R-30iB control architecture. The robot is being offered for parts or repair due to a known Axis 5 issue and missing controller operator panel.

New Arrival

SHANKLIN F-5A Automatic L-Sealer USED 0

SHANKLIN F-5A Automatic L-Sealer USED

$4,500.00

Availability:

1 in stock

SKU: IGAM4140022

This listing is for a USED Shanklin F-5A Automatic L-Sealer. The F-5A combines product conveyance and film sealing within a continuous packaging process, producing sealed packages ready for heat-shrink applications. Typical installations include manufacturing, distribution, and contract packaging operations.