All Products - Page 19 of 438 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Sort By:

VERTIV LIEBERT EXM 150KVA 480V INDUSTRIAL UPS POWER SYSTEM 51SA150BBA00S48 USED 0

VERTIV LIEBERT EXM 050KVA 480V INDUSTRIAL UPS POWER SYSTEM 51SA150BBA00S48 USED

Availability:

1 in stock

SKU: IGAM1830005

This listing is for a used Vertiv Liebert EXM industrial uninterruptible power supply system. The Liebert EXM series UPS provides high-efficiency backup power protection for data centers, industrial facilities, manufacturing plants, and critical electrical infrastructure.

See photos for details.

Part No: 51SA150BBA00S48
Type: Industrial Uninterruptible Power Supply (UPS)
Condition: USED

Manufacturer: Vertiv
Series: Liebert EXM
Output Capacity: 150 kVA / 150 kW
Input: 480 VAC, 3 Phase, 3 Wire
Input Current: 208 Amps
Frequency: 60 Hz
DC Input: 432 VDC, 435 A Max
Output: 480 VAC, 3 Phase, 3 Wire
Output Current: 180 Amps Max
Short Circuit Withstand: 65 kA
Configured Capacity: 50 kVA
Weight: 842 lbs
Manufacture Date: 2019

Battery Module Information:
Manufacturer: Samsung SDI
Model: ELPM182-00002
Battery Type: Rechargeable Lithium-Ion
Nominal Energy: 2.04 kWh
Nominal Voltage: 30.4 VDC
Rated Capacity: 67 Ah
Recommended Charge Current: 22.3 A
Recommended Charge Voltage: 33.6 V
Weight: 17 kg

New Arrival

Sealed Air T7H Shrink Tunnel USED 0

Sealed Air T7H Shrink Tunnel USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4140015

SEALED AIR SHANKLIN T7H Shrink Tunnel USED 0

SEALED AIR SHANKLIN T7H Shrink Tunnel USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4140001

This listing is for a USED Sealed Air Shanklin T7H shrink tunnel. The machine is designed to apply controlled heat to shrink film packaging for product bundling, wrapping, and package finishing applications. The T7H utilizes a conveyorized tunnel design and is commonly integrated into end-of-line packaging operations, manufacturing facilities, distribution centers, and product packaging systems.

M.J. MAILLIS WULFTEC WSML-150-S Semi-Automatic Stretch Wrapper USED 0

M.J. MAILLIS WULFTEC WSML-150-S Semi-Automatic Stretch Wrapper USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4290001

This listing is for a USED M.J. Maillis Wulftec WSML-150-S. The machine is configured for semi-automatic stretch wrapping of palletized loads using a rotating turntable and powered film carriage. Designed for end-of-line packaging operations, the system applies stretch film to stabilize loads for storage and shipment. The unit operates from a 120V single-phase power supply and incorporates a powered film delivery system.

CUSHMAN CHUCK CO 362146CA11 4 Jaw Independent Lathe Chuck USED 6

CUSHMAN CHUCK CO 362146CA11 4 Jaw Independent Lathe Chuck USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4270006

This listing is for a USED Cushman Chuck Co. 362146CA11 4 Jaw Independent Lathe Chuck. The chuck features independently adjustable jaws for irregular, non-round, and precision-centered workpieces. This heavy-duty manual workholding chuck is commonly used on vertical turning lathes, horizontal lathes, boring mills, and large machining equipment where maximum setup flexibility and workpiece adjustment are required.

LAPMASTER WOLTERS BM 18-120 Motor Grinding Spindle USED Factory Repaired 0

LAPMASTER WOLTERS BM 18-120 Motor Grinding Spindle USED Factory Repaired

$7,000.00

Availability:

4 in stock

SKU: IGAM0450600

FANUC R‑2000iA/200F Complete w/ R‑30iA Controls USED 0

FANUC R‑2000iA/200F Complete w/ R‑30iA Controls USED

$7,000.00

Availability:

1 in stock

SKU: IGAM2260299

This listing is for a USED FANUC R‑2000iA/200F industrial robot complete with an R‑30iA controller. The R‑2000iA/200F is a heavy‑duty 6‑axis robot designed for material handling, automated welding, palletizing, and other high‑payload applications. This system includes the robot arm, base, and R‑30iA controller (Type A05B‑2510‑B030), offering reliable FANUC performance with a strong support ecosystem. Key specifications include a 1240 kg robot weight, 200 kg payload class, and 480V 3‑phase controller power input.

12 TON PNEUPOWR AIRAM MODEL #4P12 PNEUMATIC PRESS 3” STROKE 0

12 TON PNEUPOWR AIRAM MODEL #4P12 PNEUMATIC PRESS 3” STROKE USED

$6,950.00

Availability:

1 in stock

SKU: IGAM3530008

12 TON PNEUPOWR AIRAM MODEL #4P12 PNEUMATIC PRESS 3” STROKE USED 0

12 TON PNEUPOWR AIRAM MODEL #4P12 PNEUMATIC PRESS 3” STROKE USED

$6,950.00

Availability:

1 in stock

SKU: IGAM3530001

GRACO EFR ELECTRIC FIXED RATIO METERING SYSTEM USED (SLIGHTLY DAMAGED) 0

GRACO EFR ELECTRIC FIXED RATIO METERING SYSTEM USED (SLIGHTLY DAMAGED)

Availability:

1 in stock

SKU: IGAM1700030

SEW‑EURODRIVE K107 A / DFV160M4 Induction Gearmotor NEW 0

SEW‑EURODRIVE K107 A / DFV160M4 Induction Gearmotor NEW

$6,800.00

Availability:

1 in stock

SKU: IGAM2840008

This listing is for a new, unused SEW‑EURODRIVE induction gearmotor, type DFV160M4/BMX/KR/TF/XV. This unit is designed for industrial power transmission applications requiring reliable torque output and continuous‑duty operation. It is a factory‑assembled SEW gearmotor consisting of a helical gear reducer coupled to a three‑phase AC induction motor.

HARDINGE NL-000015730AK Spindle Assembly with Collets NEW 0

HARDINGE NL-000015730AK Spindle Assembly with Collets NEW

Availability:

1 in stock

SKU: IGAM0450479

This listing is for a NEW Hardinge NL spindle assembly package, part number NL 000015730AK, supplied factory crated with included Hardinge collets. This is an OEM Hardinge component intended for NL‑series CNC lathes and related turning platforms. The assembly is supplied new, unused, and packaged by Hardinge for OEM installation or spare inventory. The included collets are packaged separately within the crate as shown.

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum NEW 0

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum NEW

Availability:

1 in stock

SKU: IGAM1701052

This listing is for a NEW Graco TC257J Check‑Mate Supply Pump from the D21A series. Designed for high‑pressure fluid transfer applications, this 23:1 pump is engineered for use with 50‑gallon drums. It delivers reliable performance for demanding industrial environments and supports a maximum fluid working pressure of 2300 PSI. This pump is suitable for bulk material transfer operations that require consistent flow, high durability, and compatibility with pneumatic systems.

FANUC R-2000iB/210F Complete w/ R-30iA Controls USED - Missing Items 0

FANUC R-2000iB/210F Complete w/ R-30iA Controls USED – Missing Items

$6,750.00

Availability:

1 in stock

SKU: IGAM2630020

This listing is for a USED FANUC R-2000iB/210F complete with R-30iA controller. It is designed for heavy-duty industrial automation tasks such as material handling, welding, and assembly. This unit is categorized as a 6-axis articulated robot and includes the following capabilities: 210 kg payload capacity, 2650 mm reach, and advanced motion control via the R-30iA controller.

DOES NOT INCLUDE: Teach Pendant or Teach Pendant Cable

GRACO 24C526 4-Zone Warmmelt Enclosure USED 0

GRACO 24C526 4-Zone Warmmelt Enclosure USED

Availability:

2 in stock

SKU: IGAM1700073

This listing is for a USED Graco 24C526 4-Zone Warmmelt Enclosure. It is designed for precise heating and temperature control of adhesive materials in industrial applications. This unit is categorized as a Warm Melt Adhesive Heating System and includes the following capabilities: 4 independent heating zones, durable enclosure design, and compatibility with Graco adhesive dispensing systems

ABB Terra DC Wallbox 24-C1 EV Charger USED 0

ABB Terra DC Wallbox 24-C1 EV Charger USED

$6,750.00

Availability:

1 in stock

SKU: IGAM3010020

This listing is for a USED ABB Terra DC Wallbox 24-C1. It is designed for fast DC electric vehicle charging in commercial and industrial environments. This unit is categorized as a DC wall-mounted EV charger and includes the following capabilities: AC Input 480/277V 4W+PE, DC Output 150–920V, Nominal 32A at 60Hz, and maximum output current of 60A.

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum NEW 0

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum NEW

Availability:

3 in stock

SKU: IGAM1700057

This listing is for a NEW GRACO TC257J Check‑Mate Supply Pump. It is designed for high-viscosity sealants and adhesives in 50-gallon drum applications. This unit is categorized as a Sealant Supply System and includes the following capabilities: 23:1 air motor ratio, tandem ram configuration, and industrial-grade UHMWPE/PTFE packings.

GRACO 24C526 Warmmelt Enclosure 4‑Zone Accessory USED 0

GRACO 24C526 Warmmelt Enclosure 4‑Zone Accessory USED

Availability:

1 in stock

SKU: IGAM1700211

This listing is for a USED GRACO 24C526 Enclosure — 4‑Zone Accessory for Warmmelt Supply Systems.

Designed to house and organize heaters, controls, and wiring for up to four zones in industrial warmmelt applications. Compatible with modular Graco Warm Melt systems.

See photos for details.

Part No: 24C526
Type: Warmmelt Enclosure Accessory, 4‑Zone
Condition: USED
Key Specs:
– Supports 4 heater/control zones
– Compact metal enclosure for industrial use
– Designed for Graco Warm Melt systems

Please message us with any questions.

GRACO 24C526 Warmmelt Enclosure 4‑Zone Accessory USED 0

GRACO 24C526 Warmmelt Enclosure 4‑Zone Accessory USED

Availability:

1 in stock

SKU: IGAM1700017

This listing is for a USED GRACO 24C526 Enclosure — 4‑Zone Accessory for Warmmelt Supply Systems.

Designed to house and organize heaters, controls, and wiring for up to four zones in industrial warmmelt applications. Compatible with modular Graco Warm Melt systems.

See photos for details.

Part No: 24C526
Type: Warmmelt Enclosure Accessory, 4‑Zone
Condition: USED
Key Specs:
– Supports 4 heater/control zones
– Compact metal enclosure for industrial use
– Designed for Graco Warm Melt systems

Please message us with any questions.

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum USED 14 0

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum USED 14

Availability:

1 in stock

SKU: IGAM1700014

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum NEW 0

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum NEW

Availability:

20 in stock

SKU: IGAM1700012

This unit is a NEW Graco TC257J Check‑Mate supply pump with a 23:1 ratio, configured for use with 50‑gallon drums. This pump is designed to transfer and supply viscous materials from drum containers into industrial fluid handling and dispensing systems, supporting controlled material delivery in OEM manufacturing and process environments.

TOX PRESSOTECHNIK MAG 030.663.A.001 0

TOX PRESSOTECHNIK MAG 030.663.A.001

Availability:

1 in stock

SKU: IGAM1240039

TOX PRESSOTECHNIK MAG 030.663.A.001 USED 0

TOX PRESSOTECHNIK MAG 030.663.A.001 USED

Availability:

1 in stock

SKU: IGAM1240038

Featured

TOX PRESSOTECHNIK MAG 20 TON HYDRAULIC AIR PRESS, 2021 0

TOX PRESSOTECHNIK MAG 20 TON HYDRAULIC AIR PRESS, 2021

Availability:

1 in stock

SKU: IGAM1240022

The Used 2021 TOX PRESSOTECHNIK MAG 20 Ton Hydraulic Air Press is a robust industrial press engineered for high-performance applications requiring reliable and repeatable force. Designed with TOX’s innovative air-over-oil technology, this 20-ton capacity press delivers strong, smooth pressing power while conserving energy. Manufactured in 2021, this used unit offers excellent value for manufacturers seeking premium pressing capabilities with a reduced upfront investment. Ideal for a wide range of industrial processes, the MAG 20 is trusted for its precision, compact footprint, and low-maintenance design.

TOX PRESSOTECHNIK MAG 20 TON HYDRAULIC AIR PRESS, 2021 0

TOX PRESSOTECHNIK MAG 20 TON HYDRAULIC AIR PRESS, 2021

Availability:

1 in stock

SKU: IGAM1240026

The Used 2021 TOX PRESSOTECHNIK MAG 030.663.A.001 Press is a precision-engineered, air-over-oil hydraulic press built to deliver dependable force in high-volume manufacturing environments. This specific model from the TOX MAG series is equipped with advanced TOX-Powerpackage technology, offering controlled, high-force performance in a compact and modular format. Manufactured in 2021, this used press remains a cost-effective choice for operations that demand reliability, precision, and integration flexibility across various industrial sectors.

New Arrival

BROWN & SHARPE NO. 2 Universal Tool & Cutter Grinder USED 0

BROWN & SHARPE NO. 2 Universal Tool & Cutter Grinder USED

$6,500.00

Availability:

1 in stock

SKU: IGAM4190005

This listing is for a USED Brown & Sharpe No. 2 Universal Tool & Cutter Grinder. The machine is configured for grinding and reconditioning cutting tools, cutters, form tools, and precision components requiring controlled grinding operations. The No. 2 platform incorporates a grinder head, workhead, machine base, and precision table assembly for toolroom and production grinding applications.

New Arrival

BAILEIGH DC-6000C Dust Collector USED 0

BAILEIGH DC-6000C Dust Collector USED

$6,500.00

Availability:

1 in stock

SKU: IGAM4070040

This listing is for a USED Baileigh DC-6000C dust collector. The DC-6000C is a centralized dust collection system intended for capturing and collecting airborne dust, chips, and particulate generated by woodworking, fabrication, machining, and manufacturing equipment. This configuration utilizes a 10 HP motor, cyclone-style separation design, and 440 VAC three-phase power.

New Arrival

FANUC LR Mate 200iB/5P Complete with R-J3iB Mate Controller USED 0

FANUC LR Mate 200iB/5P Complete with R-J3iB Mate Controller USED

$6,500.00

Availability:

1 in stock

SKU: IGAM4030007

This listing is for a USED FANUC LR Mate 200iB/5P robot complete with an R-J3iB Mate controller and teach pendant. The LR Mate 200iB/5P is a compact 5-axis robotic platform used for material handling, assembly, machine tending, inspection, and automated manufacturing applications. This package includes the robot, controller, teach pendant, and interconnecting cables shown.

Gardner Denver VS45-70A Variable Speed Rotary Screw Air Compressor US 0

Gardner Denver VS45-70A Variable Speed Rotary Screw Air Compressor US

$6,500.00

Availability:

1 in stock

SKU: IGAM0070074

This listing is for a USED Gardner Denver VS45-70A. The VS45-70A is a variable speed rotary screw air compressor configured for plant compressed air generation. This package incorporates a rotary screw airend, Allen-Bradley PowerFlex 400 variable frequency drive, integrated cooling system, TEAO drive motor configuration, separator system with drain, and an enclosed compressor package for industrial compressed air applications.

BRIDGEPORT Series II Vertical Milling Machine 2 HP 3-Phase USED 0

BRIDGEPORT Series II Vertical Milling Machine 2 HP 3-Phase USED

$6,500.00

Availability:

1 in stock

SKU: IGAM4100001

This listing is for a USED Bridgeport Series II vertical milling machine. It performs precision metal machining operations including milling, drilling, and boring using a 2 HP three-phase spindle motor with multi-speed capability, manual axis control, and a digital readout system for positional tracking in industrial machining environments.