All Products - Page 20 of 465 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Sort By:

1999 THOMAS ENGINEERING 36" COMPULAB 2 COATING PAN USED 0

1999 THOMAS ENGINEERING 36″ COMPULAB 2 COATING PAN USED

Availability:

1 in stock

SKU: IGAM3460001

This listing is for a used Thomas Engineering 36″ Compu-Lab 2 coating pan.
Stainless steel tablet coating system with integrated control panel and electrical cabinets.

See photos for details.

Part No: Compu-Lab 2
Type: Coating Pan
Condition: USED
Manufacturer: Thomas Engineering
Model: 36″ COMPU LAB 2
Serial No: 172
Year: 1999
Voltage: 460 V
Phase: 3
Frequency: 60 Hz
Full-Load Current: 95 A
Current of Largest Load: 38 A
Electrical Schematic Ref: TCS-31512B

VECTRAX Vertical Milling Machine 13" x 46" Table 5 HP USED 0

VECTRAX Vertical Milling Machine 13″ x 46″ Table 5 HP USED

$7,500.00

Availability:

1 in stock

SKU: IGAM2540001

This listing is for a USED Vectrax vertical milling machine. The machine features a 13 inch by 46 inch worktable with 38 inches of longitudinal travel and 19 inches of cross travel. It is equipped with a 5 horsepower spindle motor capable of speeds up to 5,000 RPM and is configured for three‑phase power with an industrial spindle taper. The mill includes GE Fanuc electronic components for machine control and operation and is suitable for general machining, toolroom, and production support applications.

GRACO EFR U83364 METER MIX DISPENSE SYSTEM TWO-PART ADHESIVE USED 0

GRACO EFR U83364 METER MIX DISPENSE SYSTEM TWO-PART ADHESIVE USED

Availability:

6 in stock

SKU: IGAM1700029

The GRACO EFR (Electric Fixed Ratio) system is a high-precision metering, mixing, and dispensing solution for two-component sealants and adhesives. It is designed to provide accurate and repeatable dispensing for applications like gasketing, beads, shots, and potting.

key features and benefits:

– High Accuracy: The EFR system delivers precise bead dispensing, ensuring a consistent ratio, even with low flow rates.
– Superior Repeatability: It offers shot repeatability with “wink-free” changeovers, meaning the transitions in the dispensing pattern are not visible in the finished bead.
– Versatility: The EFR system can handle a wide range of materials and flow rates.
– Ease of Use: It is designed to be user-friendly.
– Durable Construction: It features robust electric drives and durable Z-Pumps built to handle abrasive materials.
– Independent Motors: The system employs one electric motor per pump.
– Digital Ratio Control: An onboard Human Machine Interface (HMI) simplifies ratio adjustments and system performance monitoring.
– Integration Capabilities: The EFR system can be easily integrated with factory PLCs.

NEW - DORNER MOD:32MVA1121 FLEXMOVE CONVEYOR W/ OPTIDRIVE CONTROLS 8

NEW – DORNER MOD:32MVA1121 FLEXMOVE CONVEYOR W/ OPTIDRIVE CONTROLS

$7,500.00

Availability:

1 in stock

SKU: IGAM0480031

The Used DORNER Model 32MVA1121 FlexMove Conveyor with Optidrive Controls is a flexible, modular conveyor system designed for smooth, reliable transport of lightweight to medium-duty products in industrial automation environments. Equipped with Optidrive controls, this unit provides variable speed operation for precise material handling and integration into production lines. The FlexMove series is known for its compact footprint and modular design, making it easy to adapt for layout changes or specific automation needs. Located in Minnesota (MN), this used unit offers a cost-effective solution for manufacturers seeking efficiency and versatility in conveyor automation.

REXROTH INDRAMAT DKR02.1-W200N-BE12-01-FW CONTROLLER USED 0

REXROTH INDRAMAT DKR02.1-W200N-BE12-01-FW CONTROLLER USED

Availability:

1 in stock

SKU: IGAM0600002

The REXROTH INDRAMAT DKR02.1-W200N-BE12-01-FW CONTROLLER is a used industrial-grade drive controller, expertly designed by REXROTH INDRAMAT for robust automation and motion control tasks. This versatile unit is a key part of the DKR series, known for its reliable performance in demanding environments. Engineered for use with high-power servo and spindle motors, the DKR02.1-W200N-BE12-01-FW delivers consistent power output and smooth regulation across a range of machine configurations. Whether applied in CNC machinery, packaging lines, or industrial automation systems, this controller offers seamless integration with legacy and modern setups alike. Please note: this unit is sold as used and may show signs of prior installation, but has been inspected for core functionality. The REXROTH INDRAMAT DKR02.1-W200N-BE12-01-FW CONTROLLER remains a reliable and cost-effective solution for maintaining or upgrading your motion control systems.

THOMSON T3 CLAMSHELL DIE CUTTING PRESS 29 X 43 USED 0

THOMSON T3 CLAMSHELL DIE CUTTING PRESS 29 X 43 USED

Availability:

1 in stock

SKU: IGAM3200005

This listing is for a used Thomson clamshell die cutting press, model T3. This machine features a 29″ x 43″ cutting area and is commonly used in paperboard, carton, packaging, and print finishing operations for die cutting, creasing, and embossing. Unit includes operator control panel, flywheel drive, and foot brake as shown.

See photos for details.

Part No: T3
Type: Clamshell Die Cutting Press
Condition: USED
Manufacturer: Thomson
Cutting Area: 29 in x 43 in
Operation: Mechanical, flywheel-driven
Application: Die cutting, creasing, embossing

Overall condition is consistent with normal industrial use.

ABB IRB 6640‑180/2.55 Complete with IRC5 Controller USED 0

ABB IRB 6640‑180/2.55 Complete with IRC5 Controller USED

$7,250.00

Availability:

1 in stock

SKU: IGAM3840005

This listing is for a USED ABB IRB 6640‑180/2.55 robot system supplied complete with an ABB IRC5 M2004 controller and ABB FlexPendant teach pendant. The IRB 6640‑180/2.55 is a six‑axis articulated robot designed for high‑payload applications with extended reach. The complete system shown is commonly used in heavy‑duty automation cells for material handling, welding, and general manufacturing operations requiring robustness and repeatability.

ABB IRB 6640-180/2.55 Complete with S4C+ Controller USED 0

ABB IRB 6640-180/2.55 Complete with IRC5 Controller USED

$7,250.00

Availability:

1 in stock

SKU: IGAM3840001

This listing is for a USED ABB IRB 6640‑180/2.55 complete with IRC5 controller. This unit is designed to serve as a six‑axis articulated industrial robot used for material handling, machine tending, and automation processes requiring extended reach and moderate payload capacity. The system includes the robot, IRC5 control cabinet, and teach pendant for programming and operation.

New Arrival

GALLMEYER & LIVINGSTON Surface Grinder USED 0

GALLMEYER & LIVINGSTON Surface Grinder USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4460012

This listing is for a USED Gallmeyer & Livingston Surface Grinder. This machine provides precision surface grinding capabilities for finishing flat workpieces and achieving controlled surface finishes in toolroom and production machining environments. Gallmeyer & Livingston grinders are commonly utilized for precision grinding, die work, fixture manufacturing, and general machine shop operations.

New Arrival

LAPOINTE HP-10 Hydraulic Broaching Machine USED 0

LAPOINTE HP-10 Hydraulic Broaching Machine USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4460013

LITTELL 212-17PD Continuous Straightening Machine USED 0

LITTELL 212-17PD Continuous Straightening Machine USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4460010

This listing is for a USED LITTELL 212-17PD Continuous Straightening Machine. Designed for coil processing, strip preparation, and press feed applications, this machine removes coil set and material curvature prior to stamping, forming, and fabrication operations. The heavy-duty straightening assembly, manual adjustment controls, and integrated electrical system make it suitable for coil-fed production environments and metal stamping lines.

Sealed Air T7H Shrink Tunnel USED 0

Sealed Air T7H Shrink Tunnel USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4140015

SEALED AIR SHANKLIN T7H Shrink Tunnel USED 0

SEALED AIR SHANKLIN T7H Shrink Tunnel USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4140001

This listing is for a USED Sealed Air Shanklin T7H shrink tunnel. The machine is designed to apply controlled heat to shrink film packaging for product bundling, wrapping, and package finishing applications. The T7H utilizes a conveyorized tunnel design and is commonly integrated into end-of-line packaging operations, manufacturing facilities, distribution centers, and product packaging systems.

M.J. MAILLIS WULFTEC WSML-150-S Semi-Automatic Stretch Wrapper USED 0

M.J. MAILLIS WULFTEC WSML-150-S Semi-Automatic Stretch Wrapper USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4290001

This listing is for a USED M.J. Maillis Wulftec WSML-150-S. The machine is configured for semi-automatic stretch wrapping of palletized loads using a rotating turntable and powered film carriage. Designed for end-of-line packaging operations, the system applies stretch film to stabilize loads for storage and shipment. The unit operates from a 120V single-phase power supply and incorporates a powered film delivery system.

CUSHMAN CHUCK CO 362146CA11 4 Jaw Independent Lathe Chuck USED 6

CUSHMAN CHUCK CO 362146CA11 4 Jaw Independent Lathe Chuck USED

$7,000.00

Availability:

1 in stock

SKU: IGAM4270006

This listing is for a USED Cushman Chuck Co. 362146CA11 4 Jaw Independent Lathe Chuck. The chuck features independently adjustable jaws for irregular, non-round, and precision-centered workpieces. This heavy-duty manual workholding chuck is commonly used on vertical turning lathes, horizontal lathes, boring mills, and large machining equipment where maximum setup flexibility and workpiece adjustment are required.

LAPMASTER WOLTERS BM 18-120 Motor Grinding Spindle USED Factory Repaired 0

LAPMASTER WOLTERS BM 18-120 Motor Grinding Spindle USED Factory Repaired

$7,000.00

Availability:

4 in stock

SKU: IGAM0450600

FANUC R‑2000iA/200F Complete w/ R‑30iA Controls USED 0

FANUC R‑2000iA/200F Complete w/ R‑30iA Controls USED

$7,000.00

Availability:

1 in stock

SKU: IGAM2260299

This listing is for a USED FANUC R‑2000iA/200F industrial robot complete with an R‑30iA controller. The R‑2000iA/200F is a heavy‑duty 6‑axis robot designed for material handling, automated welding, palletizing, and other high‑payload applications. This system includes the robot arm, base, and R‑30iA controller (Type A05B‑2510‑B030), offering reliable FANUC performance with a strong support ecosystem. Key specifications include a 1240 kg robot weight, 200 kg payload class, and 480V 3‑phase controller power input.

12 TON PNEUPOWR AIRAM MODEL #4P12 PNEUMATIC PRESS 3” STROKE 0

12 TON PNEUPOWR AIRAM MODEL #4P12 PNEUMATIC PRESS 3” STROKE USED

$6,950.00

Availability:

1 in stock

SKU: IGAM3530008

12 TON PNEUPOWR AIRAM MODEL #4P12 PNEUMATIC PRESS 3” STROKE USED 0

12 TON PNEUPOWR AIRAM MODEL #4P12 PNEUMATIC PRESS 3” STROKE USED

$6,950.00

Availability:

1 in stock

SKU: IGAM3530001

GRACO EFR ELECTRIC FIXED RATIO METERING SYSTEM USED (SLIGHTLY DAMAGED) 0

GRACO EFR ELECTRIC FIXED RATIO METERING SYSTEM USED (SLIGHTLY DAMAGED)

Availability:

1 in stock

SKU: IGAM1700030

SEW‑EURODRIVE K107 A / DFV160M4 Induction Gearmotor NEW 0

SEW‑EURODRIVE K107 A / DFV160M4 Induction Gearmotor NEW

$6,800.00

Availability:

1 in stock

SKU: IGAM2840008

This listing is for a new, unused SEW‑EURODRIVE induction gearmotor, type DFV160M4/BMX/KR/TF/XV. This unit is designed for industrial power transmission applications requiring reliable torque output and continuous‑duty operation. It is a factory‑assembled SEW gearmotor consisting of a helical gear reducer coupled to a three‑phase AC induction motor.

HARDINGE NL-000015730AK Spindle Assembly with Collets NEW 0

HARDINGE NL-000015730AK Spindle Assembly with Collets NEW

Availability:

1 in stock

SKU: IGAM0450479

This listing is for a NEW Hardinge NL spindle assembly package, part number NL 000015730AK, supplied factory crated with included Hardinge collets. This is an OEM Hardinge component intended for NL‑series CNC lathes and related turning platforms. The assembly is supplied new, unused, and packaged by Hardinge for OEM installation or spare inventory. The included collets are packaged separately within the crate as shown.

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum NEW 0

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum NEW

Availability:

1 in stock

SKU: IGAM1701052

This listing is for a NEW Graco TC257J Check‑Mate Supply Pump from the D21A series. Designed for high‑pressure fluid transfer applications, this 23:1 pump is engineered for use with 50‑gallon drums. It delivers reliable performance for demanding industrial environments and supports a maximum fluid working pressure of 2300 PSI. This pump is suitable for bulk material transfer operations that require consistent flow, high durability, and compatibility with pneumatic systems.

FANUC R-2000iB/210F with R-30iA Controls USED - Missing Items 0

FANUC R-2000iB/210F with R-30iA Controls USED – Missing Items

$6,750.00

Availability:

1 in stock

SKU: IGAM2630020

This listing is for a USED FANUC R-2000iB/210F complete with R-30iA controller. It is designed for heavy-duty industrial automation tasks such as material handling, welding, and assembly. This unit is categorized as a 6-axis articulated robot and includes the following capabilities: 210 kg payload capacity, 2650 mm reach, and advanced motion control via the R-30iA controller.

DOES NOT INCLUDE: Teach Pendant or Teach Pendant Cable

GRACO 24C526 4-Zone Warmmelt Enclosure USED 0

GRACO 24C526 4-Zone Warmmelt Enclosure USED

Availability:

2 in stock

SKU: IGAM1700073

This listing is for a USED Graco 24C526 4-Zone Warmmelt Enclosure. It is designed for precise heating and temperature control of adhesive materials in industrial applications. This unit is categorized as a Warm Melt Adhesive Heating System and includes the following capabilities: 4 independent heating zones, durable enclosure design, and compatibility with Graco adhesive dispensing systems

ABB Terra DC Wallbox 24-C1 EV Charger USED 0

ABB Terra DC Wallbox 24-C1 EV Charger USED

$6,750.00

Availability:

1 in stock

SKU: IGAM3010020

This listing is for a USED ABB Terra DC Wallbox 24-C1. It is designed for fast DC electric vehicle charging in commercial and industrial environments. This unit is categorized as a DC wall-mounted EV charger and includes the following capabilities: AC Input 480/277V 4W+PE, DC Output 150–920V, Nominal 32A at 60Hz, and maximum output current of 60A.

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum NEW 0

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum NEW

Availability:

3 in stock

SKU: IGAM1700057

This listing is for a NEW GRACO TC257J Check‑Mate Supply Pump. It is designed for high-viscosity sealants and adhesives in 50-gallon drum applications. This unit is categorized as a Sealant Supply System and includes the following capabilities: 23:1 air motor ratio, tandem ram configuration, and industrial-grade UHMWPE/PTFE packings.

GRACO 24C526 Warmmelt Enclosure 4‑Zone Accessory USED 0

GRACO 24C526 Warmmelt Enclosure 4‑Zone Accessory USED

Availability:

1 in stock

SKU: IGAM1700211

This listing is for a USED GRACO 24C526 Enclosure — 4‑Zone Accessory for Warmmelt Supply Systems.

Designed to house and organize heaters, controls, and wiring for up to four zones in industrial warmmelt applications. Compatible with modular Graco Warm Melt systems.

See photos for details.

Part No: 24C526
Type: Warmmelt Enclosure Accessory, 4‑Zone
Condition: USED
Key Specs:
– Supports 4 heater/control zones
– Compact metal enclosure for industrial use
– Designed for Graco Warm Melt systems

Please message us with any questions.

GRACO 24C526 Warmmelt Enclosure 4‑Zone Accessory USED 0

GRACO 24C526 Warmmelt Enclosure 4‑Zone Accessory USED

Availability:

1 in stock

SKU: IGAM1700017

This listing is for a USED GRACO 24C526 Enclosure — 4‑Zone Accessory for Warmmelt Supply Systems.

Designed to house and organize heaters, controls, and wiring for up to four zones in industrial warmmelt applications. Compatible with modular Graco Warm Melt systems.

See photos for details.

Part No: 24C526
Type: Warmmelt Enclosure Accessory, 4‑Zone
Condition: USED
Key Specs:
– Supports 4 heater/control zones
– Compact metal enclosure for industrial use
– Designed for Graco Warm Melt systems

Please message us with any questions.

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum USED 0

GRACO TC257J Check‑Mate Supply Pump 23:1 for 50 Gal Drum USED

Availability:

1 in stock

SKU: IGAM1700014