Archives: All Products

View Details

SIEMENS 3RV1901-1A Auxiliary Contact Switch USED

$3.00

Availability:

13 in stock

SKU: IGAM1910305

View Details

Grinding Stone Mounted Abrasive Bit NEW

$3.00

Availability:

56 in stock

SKU: IGAM1240083

This listing is for a NEW mounted grinding stone abrasive bit. This component is designed for material removal, deburring, surface preparation, and light grinding applications. Mounted grinding stones of this type are commonly used with rotary tools, die grinders, and hand grinders in industrial, maintenance, and fabrication environments.

View Details

KOYO B-1212;PB;L125 NEEDLE ROLLER BEARING ¾″ X 1″ NEW

$2.50

Availability:

5 in stock

SKU: IGAM1050118

View Details

ABB 1SNA607217R0200 END PLATE FOR ZS35 TERMINAL BLOCK USED

$2.50

Availability:

24 in stock

SKU: IGAM1350460

This listing is for a USED ABB 1SNA607217R0200 End Plate for terminal blocks.

Designed to mount on DIN rail to cap the end of ZS35 terminal blocks in the SNK series. Provides structural and electrical isolation for terminal assemblies.

See photos for details.

Part No: 1SNA607217R0200
Type: DIN Rail End Plate
Condition: USED
For Use With: ABB ZS35 Terminal Blocks
Color: Grey
Material: Flame-retardant Polyamide
Please message us with any questions.

View Details

MITSUBISHI AJ65SBTB1-32T1 CC-Link Output Module USED

$2.50

Availability:

36 in stock

SKU: IGAM0520166

This listing is for a USED MITSUBISHI AJ65SBTB1-32T1. A CC-Link remote I/O output module providing transistor-based switching outputs for distributed control systems, supporting 32 output points with 24V DC operation for integration into Mitsubishi PLC automation networks and field device control applications.

New Arrival

View Details

SPEA H3560 P&P Handler w/ C600MXIC Multi‑Mode Semiconductor Tester USED

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM2700062

This listing is for a USED SPEA H3560 Multimode Semiconductor Test System paired with a SPEA C600MXIC Tester Module. This integrated solution is designed for automated semiconductor device testing and includes a built‑in pick‑and‑place handler, control electronics, tester cabinet, and PC-based system interface. The H3560 Handler is rated at 230V, 5.8kVA, 50/60Hz with 0.7MPa air pressure requirement, and the C600MXIC Tester Module is rated at 208V 3‑phase, 15kVA, 50/60Hz. Both units were manufactured in 2011 and include cabling, system documentation, and software as pictured. Unit is untested and sold as‑is.

New Arrival

View Details

MAC VALVES 0552-01-013-T Pneumatic Pilot Valve NEW

Availability:

1 in stock

SKU: IGAM4120188

This listing is for a NEW MAC Valves 0552-01-013-T pneumatic pilot valve. The valve is part of the MAC 55 Series and is used for pneumatic directional control in industrial automation, actuator control, and machine pneumatic systems. This 1/4 inch ported pilot-operated valve is intended for compressed air applications requiring fast response and reliable pneumatic switching.

New Arrival

View Details

SEW-EURODRIVE K47AM143 Helical-Bevel Gear Reducer USED

Availability:

1 in stock

SKU: Igam4120192

This listing is for a USED SEW-EURODRIVE K47AM143 helical-bevel gear reducer. The K47 series provides speed reduction and torque multiplication for industrial power transmission systems. This reducer features a 48.95:1 ratio, right-angle output configuration, and is suitable for conveyors, material handling systems, packaging equipment, and general industrial machinery.

View Details

OKK HM-600 4-AXIS CNC Machines

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM3990002

View Details

OKK VM5 CNC Machines

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM3990001

View Details

ENGEL DUO 23050/3200 PRO Two Platen Injection Molding Machine USED

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM2290004

This listing is for a USED ENGEL DUO 23050/3200 PRO injection molding machine. It is designed for high‑tonnage industrial plastic molding applications requiring large mold space and stable clamping performance. This unit is categorized as a two platen hydraulic injection molding machine and includes high clamping force capacity, large injection unit designation, and ENGEL OEM electrical architecture as verified by the original nameplate.

View Details

CHS PS-350-18 HDX Coil Feed Line System – USED

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM3160018

This listing is for a USED CHS PS-350-18 HDX Coil Feed Line System. It is designed for handling and straightening HSLA and similar coil stock in stamping and forming operations. This unit is categorized as a heavy‑duty coil feed line and includes capabilities such as 20,000 lb coil handling, 18 inch stock width capacity, and powered straightening with advanced loop and control systems.

View Details

IOWA PRECISION GAF60-6 / FTS-DCT6016SL Coil Slitting & Cut-To-Length Line – USED

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM3130001

This listing is for a USED Iowa Precision coil slitting and cut‑to‑length processing line, incorporating Model GAF60‑6 uncoilers and Model FTS‑DCT6016SL line configuration. The system is designed for processing steel coil material through slitting, straightening, punching/notching, scrap handling, and shearing operations. This unit is categorized as a coil processing line and includes capabilities such as variable line speed operation, hydraulic punching and shearing, adjustable slitting, and PC‑based controls.

Location: OH

View Details

SIEMENS 6AV7241‑7EB18‑0FA0 SIMATIC IPC477E Touch Panel HMI USED

CALL FOR PRICE

Availability:

4 in stock

SKU: IGAM1910789

This listing is for a USED Siemens 6AV7241‑7EB18‑0FA0 SIMATIC IPC477E touch panel PC. This unit is commonly installed in industrial automation systems to provide operator interface, visualization, and control functionality for machines and processes, and is typically used to run HMI applications, SCADA software, and PC‑based control tasks in manufacturing and OEM environments.

View Details

1997 MORI SEIKI FRONTIER M2 VERTICAL MACHINING CENTER – USED

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM2980002

View Details

PANGBORN ES-1921-109 ROTOBLAST STRUCTURAL STEEL BLAST MACHINE USED

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM0480064

This listing is for a Pangborn ES-1821-109 Rotoblast Structural Steel Blast Machine.

Manufacturer: Pangborn
Model: ES-1821-109 Rotoblast
Part Opening: 16″ wide x 36″ high
Plate Opening: 72″ wide
Roller Capacity: 500 lbs per foot
Structural Speed: 5 to 7 FPM
Plate Speed: 8 to 10 FPM
Rotoblast Wheels: 4
Motor per Wheel: 25 HP

• Includes 10’ section of conveyor with spill hopper; CDLR infeed and exit conveyors not included.
• Price includes loading onto buyer’s truck/trucks.

Location: Cleveland, OH

View Details

2009 3/8″ T&H LEMONT MODEL #WU11-9 STAINLESS TUBE MILL USED

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM3260001

This listing is for a 3/8″ T&H Lemont WU11-9 Tube Mill.

Manufacturer: T & H Lemont
Model: WU11-9

Tube OD Range: .236″ – 1.000″
Finished Tube Diameter: .312″
Wall Thickness Range: .012″ – .030″
Maximum Tube Diameter: .750″
Material Capability: 316L Stainless Steel

Mill Speed: 0–60 FPM
Passline Height: 43″
Mill Direction: Right to Left
Voltage: 480V / 3 Phase
Welding: Laser / TIG

Driven Roll Shaft Diameter: 1.125″
Roll Space (Breakdown / Fin / Sizing): 3.000″
Nominal Roll Root Diameter: 2.500″

Uncoiler Capacity: 1,500 lbs per side
Maximum Coil Width: 12″
Maximum Coil OD: 54″
Drum Expansion: 14″–20″ Manual
Segments: 3

Shear & End Welder Material: 316L Stainless
Strip Width: 1.000″
Gauge Capacity: .012″
Maximum Shear Strength: 65,000 PSI
Power Supply: 110V, 20 Amp
Weld Type: TIG

Drive Motors: (3) 10 HP
Variable Motor Speed: 100–1150 RPM (2100 RPM Max)
Dynamic Braking: All Sections
Speed Stability: ±1%

Flying Cutoff System: Technisales ACCU-CUT
Cut Capacity: .236″ – 1.000″ OD x .012″ – .030″ Wall
Maximum Line Speed: 60 FPM
Cut Length Range: 18′ – 20′
Length Tolerance: ±.020″
Tube End Squareness: .008″
Maximum OD Burr: 10% of Wall Thickness

Run-Off Table: Height Adjustable Steel Weldment with Air-Activated Dump

Eddy Current Inspection System: Eddy Check “S” NEMA 12 with Inspection Head, Differential Encircling Coil, Probes, RF Cables, Electronic Rack, Power Supplies, Connector Box, Paint Marker, Horn & Lamp

Location: Holland, OH

View Details

FANUC R-2000iB/210F Complete w/ R-30iB Controller USED

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM2260229

This listing is for a USED FANUC R‑2000iB/210F six‑axis industrial robot complete with an R‑30iB controller. The R‑2000iB/210F is a 210 kg‑payload heavy‑duty robot designed for material handling, welding, palletizing, and general industrial automation. This system includes a 2015 R‑30iB controller (Type A05B‑2635‑B022) with 3‑phase input and 5 kVA rating. The robot and controller are matched and fully identified by their factory serial numbers shown in the photos.

View Details

ROWE 7530-DSJ REEL & B-30 FEEDER STRAIGHTENER COMBO USED

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM2120002

This listing is for a Rowe 7530-DSJ Reel & B-30 Feeder Straightener.

Manufacturer Rowe
Model No. 7530-DSJ Uncoiler
Serial No. 27487
Voltage 440 Volts
Phase 3 Phase
Frequency 60 Hz
Full Load Amps 5 F.L. Amps
Speed 1800 RPM
Motor 1.5 HP
Duty Continuous
Wiring Diagram No. 5E-2-R

Manufacturer Rowe
Model B-30 Coil Feed Straightener
Serial number 7488
Machine type coil feeder straightener
Minimum material thickness 0.030 in mild steel
Maximum material thickness 0.065 in steel

Location Alto, MI

View Details

COHERENT ENCLOSURES USED

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM1700084

Coherent Enclosures – Precision Laser-Cut for Superior Quality

Crafted using advanced laser cutting technology, these Coherent Enclosures offer high precision, clean edges, and a professional finish. Ideal for electronics, control panels, and custom projects, each unit ensures durability and a sleek, modern look.

Featured

View Details

2023 BARON BLAKESLEE Z SERIES DEGREASER WITH MONORAIL LOADING SYSTEM

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM2530001

DEGREASER SYSTEM WITH STILL AND AUTO LOADING
⦁ 100% Freeboard Ratio
⦁ Water Cooled Primary Condensing Coils
⦁ Vapor Trap™ Sub-Zero Refrigerated Freeboard Coils
⦁ Stainless Steel Finned Coils
⦁ Heavy Gauge Stainless Steel Tank Construction
⦁ Fully Insulated Tanks
⦁ Brushed Stainless Steel Insulation Panels
⦁ Water Separator with Secondary Water Cooling Coil
⦁ Easy Open Clean Out Door
⦁ Electric Low Watt Density Immersion Heaters
⦁ Solvent Vapor Control
⦁ High Temperature Control
⦁ Liquid Temperature Control
⦁ Low Level Control
⦁ Vapor Up Control
⦁ Manual Spray Wand

View Details

GRACO SN9104 HFR Supply System 230/3 1:1 SS 55/55 10 NEW

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM1701035

This listing is for a NEW GRACO SN9104.

High-performance hydraulic fixed ratio sealant system designed for precision dispensing of two-component materials. Ideal for industrial bonding, sealing, and robotic applications.

See photos for details.

Part No: SN9104
Type: Hydraulic Fixed Ratio Sealant System
Condition: NEW
Ratio: 1:1
Voltage: 230V / 3-phase
Drum Capacity: Dual 55-gallon (200L)
Construction: Stainless Steel wetted parts
Mixing: Static / Dynamic / Impingement
Please message us with any questions.

View Details

GRACO SN9100 Tandem Ram 23:1 Supply System 200L NEW

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM1701026

This listing is for a NEW GRACO SN9100.

Heavy-duty tandem ram sealant system designed for dispensing medium to high-viscosity materials from 200L drums. Ideal for industrial bonding, sealing, and fluid transfer applications.

See photos for details.

Part No: SN9100
Type: Tandem Ram Sealant System
Condition: NEW
Pump Ratio: 23:1
Max Fluid Pressure: 2270 PSI
Max Air Inlet Pressure: 150 PSI
Drum Capacity: 200L
Power Type: Pneumatic
Please message us with any questions.

View Details

GRACO TC257J Check‑Mate Tandem Supply Pump 23:1 for 50 Gal Drum NEW

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM1700013

This unit is a NEW Graco TC257J Check‑Mate tandem supply pump with a 23:1 ratio, configured for use with 50‑gallon drums. This supply pump is designed to transfer and supply viscous materials within industrial fluid handling and dispensing systems, supporting controlled delivery in OEM manufacturing and process applications.

View Details

48″ X 20,000LBS X .80″ HERR VOSS CUT-TO-LENGTH LINE W/PRECISION LEVELER

CALL FOR PRICE

Availability:

1 in stock

SKU: IGAM0480042

COIL CAR 20,000 LBS X 48″

ROWE COIL REEL 20,000 LBS x 48″
SERIAL R35280.5
MODEL 200048 DSJ
COIL ID 19″ TO 24.5″
COIL OD 60″
SPEED 150FPM
PUMPKIN TOOTH MANDREL
HOLD DON ARM

THREADING TABLE
HYDRAULIC LIFT

LEVELLER
SERIAL 28100-6
MODEL VKL RH 66/1.750-19/7 4 HI PR
WIDTH 66″
CAPACITY 48″ x .020 to .080″ @80K YIELD
ROLLS 13
BACK UP 4 HI
ROLL DIAMETER 1.75″
SPEED 75 FPM MAXIMUM
5 ROLL BANK ADJUSTMENT

HERR VOSS SHEAR
SERIAL 28100-8
MODEL 0308
CAPACITY .1875″

STACKING TABLE
SHEET LENGTH 24″ TO 144″

CRANE UNLOADING SYSTEM

CONTROLS

View Details

2015 VOORTMAN V630 3-AXIS BEAM DRILLING/MILLING MACHINE W/ 50″ VB1250 SAW

$385,000.00

Availability:

Out of stock

SKU: IGAM0620004

The Voortman V630 is a high-performance beam processing machine designed for precision and efficiency. Capable of drilling, milling, countersinking, thread tapping, numbering, and marking, it processes both the web and flanges simultaneously to maximize throughput. Ideal for structural steel fabrication.

50″ VB1250 saw is included in the price, as well as 60′ infeed and outfeed with double drag dogs on the infeed.

Location: WI

View Details

2020 Haas ST-40L CNC LATHE USED

$155,500.00

Availability:

Out of stock

SKU: IGAM4200001

This listing is for a 2020 Haas ST-40L CNC Lathe.

Options included:

12-state hydrid Bot/vdt tool turret

4000-rpm live tooling with C Axis

6000 Rpm speed upgrad for live tooling

Automatic tool pressetter

Chip conveyor

(4) HA40m-SK20X-ice – haas live VDi40 x-axis 90deg/sk20

(2) HA40m – Sk20Z-ice – haas live Vdi40 z-axis str/sk20intc

(1) 9HC22 Lyndex Nikken spanner wrench

(1) Spanner wrench ER25/45/50mm external pin mimatic

Location: OH

View Details

2020 KOMATSU H1F150-2 SERVO PRESS USED

$135,000.00

Availability:

Out of stock

SKU: IGAM1240001

The 2020 KOMATSU H1F150-2 Servo Press is a used, precision-engineered press designed to deliver exceptional performance in demanding industrial environments. Capable of exerting up to 165 tons of pressing force with a stroke rate ranging from 0 to 128 strokes per minute, this servo press features a 70 HP electric servo motor for energy-efficient operation. With low operating hours, it is in excellent working condition. The unit’s compact footprint, robust construction, and advanced control system make it a powerful addition to any high-volume manufacturing line.

View Details

HEXAGON GLOBAL S GREEN 12.15.10 COORDINATE MEASURING MACHINE CMM SYSTEM USED

$130,000.00

Availability:

Out of stock

SKU: IGAM2740143

This listing is for a used 2021 Hexagon Global S Green 12.15.10.
This is a complete bridge-type coordinate measuring machine (CMM) system including control rack, Renishaw probing electronics, and workstation.

See photos for details.

Part No: Global S Green 12.15.10
Type: Bridge Coordinate Measuring Machine (CMM)
Condition: USED

Serial Number: 0521-6412 UA
Date of Construction: 04/2021
Controller P/N: 658002105/05
Control Circuit Voltage: 24VDC
Input Power: 120 VAC, 1PH+PE, 60 Hz
FLA: 5A
Largest Load: 5.7A
Fuse: 6.3A

Includes:

Hexagon HH-C-V2.1 control unit

Hexagon HP-LC-300

Renishaw PI200-3

Renishaw IS1-2 Interface Selector

Lenovo ThinkStation workstation

Granite table and bridge structure

Air dryer/filter assembly noted (see photos).

System was removed from service. Operational status not verified by seller.

View Details

2019 HAAS VF-6/40 CNC VERTICAL MACHINING CENTER – USED

$125,000.00

Availability:

Out of stock

SKU: iGAM2740150

SIEMENS 3RV1901-1A Auxiliary Contact Switch USED

Grinding Stone Mounted Abrasive Bit NEW

KOYO B-1212;PB;L125 NEEDLE ROLLER BEARING ¾″ X 1″ NEW

ABB 1SNA607217R0200 END PLATE FOR ZS35 TERMINAL BLOCK USED

MITSUBISHI AJ65SBTB1-32T1 CC-Link Output Module USED

SPEA H3560 P&P Handler w/ C600MXIC Multi‑Mode Semiconductor Tester USED

MAC VALVES 0552-01-013-T Pneumatic Pilot Valve NEW

SEW-EURODRIVE K47AM143 Helical-Bevel Gear Reducer USED

OKK HM-600 4-AXIS CNC Machines

OKK VM5 CNC Machines

ENGEL DUO 23050/3200 PRO Two Platen Injection Molding Machine USED

CHS PS-350-18 HDX Coil Feed Line System – USED

IOWA PRECISION GAF60-6 / FTS-DCT6016SL Coil Slitting & Cut-To-Length Line – USED

SIEMENS 6AV7241‑7EB18‑0FA0 SIMATIC IPC477E Touch Panel HMI USED

1997 MORI SEIKI FRONTIER M2 VERTICAL MACHINING CENTER – USED

PANGBORN ES-1921-109 ROTOBLAST STRUCTURAL STEEL BLAST MACHINE USED

2009 3/8″ T&H LEMONT MODEL #WU11-9 STAINLESS TUBE MILL USED

FANUC R-2000iB/210F Complete w/ R-30iB Controller USED

ROWE 7530-DSJ REEL & B-30 FEEDER STRAIGHTENER COMBO USED

COHERENT ENCLOSURES USED

2023 BARON BLAKESLEE Z SERIES DEGREASER WITH MONORAIL LOADING SYSTEM

GRACO SN9104 HFR Supply System 230/3 1:1 SS 55/55 10 NEW

GRACO SN9100 Tandem Ram 23:1 Supply System 200L NEW

GRACO TC257J Check‑Mate Tandem Supply Pump 23:1 for 50 Gal Drum NEW

48″ X 20,000LBS X .80″ HERR VOSS CUT-TO-LENGTH LINE W/PRECISION LEVELER

2015 VOORTMAN V630 3-AXIS BEAM DRILLING/MILLING MACHINE W/ 50″ VB1250 SAW

2020 Haas ST-40L CNC LATHE USED

2020 KOMATSU H1F150-2 SERVO PRESS USED

HEXAGON GLOBAL S GREEN 12.15.10 COORDINATE MEASURING MACHINE CMM SYSTEM USED

2019 HAAS VF-6/40 CNC VERTICAL MACHINING CENTER – USED

Customer Support

About

More