All Products - Page 26 of 389 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Sort By:

FRONIUS TPS 400i /nc 400A Welding Power Source USED 0

FRONIUS TPS 400i /nc 400A Welding Power Source USED

$4,500.00

Availability:

1 in stock

SKU: IGAM2260344

This listing is for a USED Fronius TPS 400i /nc welding power source. The TPS 400i is an inverter‑based industrial welding power supply rated up to 400 amps and designed for high‑performance MIG and automated welding applications. This unit operates on three‑phase input power and is commonly integrated into robotic or mechanized welding systems when paired with compatible Fronius feeders and control interfaces.

LINCOLN ELECTRIC Power Wave R350 Welding Power Source USED 0

LINCOLN ELECTRIC Power Wave R350 Welding Power Source USED

$4,500.00

Availability:

1 in stock

SKU: IGAM2260343

This listing is for a USED Lincoln Electric Power Wave R350 welding power source. The Power Wave R350 is an inverter‑based industrial welding power supply designed for high‑duty‑cycle MIG, flux‑cored, and automated welding applications. This unit supports a wide range of single‑phase and three‑phase input voltages and is commonly integrated into robotic or mechanized welding systems when paired with compatible feeders and controls.

LINCOLN ELECTRIC Power Wave R350 Welding Power Source USED 0

LINCOLN ELECTRIC Power Wave R350 Welding Power Source USED

$4,500.00

Availability:

1 in stock

SKU: IGAM2260342

This listing is for a USED Lincoln Electric Power Wave R350 welding power source. The Power Wave R350 is an inverter‑based industrial welding power supply designed for high‑performance MIG, flux‑cored, and automated welding applications. This unit is commonly integrated into robotic and mechanized welding systems and operates on a wide range of single‑phase or three‑phase input voltages for industrial environments.

LINCOLN ELECTRIC Power Wave R350 Welding Power Source USED 0

LINCOLN ELECTRIC Power Wave R350 Welding Power Source USED

$4,500.00

Availability:

1 in stock

SKU: IGAM2260341

This listing is for a USED Lincoln Electric Power Wave R350 welding power source. The Power Wave R350 is an inverter‑based industrial welding power supply designed for high‑performance MIG, flux‑cored, and automated welding applications. This unit is commonly integrated into robotic or automated welding systems and is intended for use with compatible wire feeders and control interfaces.

LINCOLN ELECTRIC Power Wave R350 Advanced Welding Power Source USED 0

LINCOLN ELECTRIC Power Wave R350 Advanced Welding Power Source USED

$4,500.00

Availability:

1 in stock

SKU: IGAM2260340

This listing is for a USED Lincoln Electric Power Wave R350 advanced welding power source. The Power Wave R350 is a digitally controlled inverter welding power source designed for high‑performance industrial welding applications. It supports constant current and constant voltage output modes and is commonly used for GMAW, FCAW, and related welding processes when integrated into automated or semi‑automated welding systems. This unit is commonly integrated into robotic or automated welding systems and requires compatible wire feeding and control equipment.

BOSCH 1070075543 CP/MEM5 Control Memory Module NEW 0

BOSCH 1070075543 CP/MEM5 Control Memory Module NEW

$4,500.00

Availability:

1 in stock

SKU: IGAM2840110

HARDINGE LS 200DBR 16T LATHE SPINDLE ASSEMBLY NEW 0

HARDINGE LS 200DBR 16T LATHE SPINDLE ASSEMBLY NEW

$4,500.00

Availability:

1 in stock

SKU: IGAM0450481

NORDSON RHINO TWIN POST INDUSTRIAL DISPENSING SYSTEM; USED 0

NORDSON RHINO TWIN POST INDUSTRIAL DISPENSING SYSTEM; USED

$4,500.00

Availability:

1 in stock

SKU: IGAM3010041

USED Nordson 190CC‑XD‑125 twin post industrial dispensing system. It is designed for high‑pressure dispensing of adhesives, sealants, or similar production materials. The unit features a dual‑cylinder support structure and is built for consistent material output in automated or manual process environments. This system supports up to 100 psi input air pressure and up to 1500 psi material output pressure, making it suitable for demanding industrial applications.

GRACO 25A600 DRUM AGITATOR PACKAGE 100 PSI MAX AIR USED 0

GRACO 25A600 DRUM AGITATOR PACKAGE 100 PSI MAX AIR USED

$7,500.00

Availability:

2 in stock

SKU: IGAM1700053

This listing is for a used Graco 25A600 drum agitator package.
Air-powered agitator assembly designed for use with Graco elevator pump systems for mixing and material agitation in drum applications.

See photos for details.

Part No: 25A600
Type: Drum Agitator Package
Condition: USED
Max Air WPR: 100 PSI
Compatible Elevator Packages 5:1 Ratio Pump CS: 25A601
Compatible Elevator Packages 5:1 Ratio Pump SST: 25A602
Compatible Elevator Packages 10:1 Ratio Pump CS: 25A603
Compatible Elevator Packages 10:1 Ratio Pump SST: 25A604
Manufacturer: Graco

CHARLES ROSS LDM‑2 Lab Mixer USED 0

CHARLES ROSS LDM‑2 Lab Mixer USED

$7,500.00

Availability:

1 in stock

SKU: IGAM2880018

This listing is for a USED Charles Ross LDM‑2 Mixer. The LDM‑series mixers are designed for laboratory and small‑batch mixing of liquids, slurries, and light‑viscosity materials. As a compact and versatile laboratory mixer, this unit is commonly used in chemical, pharmaceutical, adhesives, R&D, and general industrial applications. The LDM‑2 provides reliable blending performance and is part of Ross’s well‑known laboratory mixer product family.

PATTERSON INDUSTRIES KA-47 Twin-Shell V‑Blender USED 0

PATTERSON INDUSTRIES KA-47 Twin-Shell V‑Blender USED

$7,500.00

Availability:

1 in stock

SKU: IGAM2880019

This listing is for a USED Patterson Industries V‑Blender, built in 2001 with serial number CA1122. V‑blenders are designed for dry powder and granular material mixing by rotating twin blending shells in a uniform tumbling action. This equipment type is commonly used in chemical, food, and industrial applications where gentle, homogeneous blending is required. This unit features a stainless‑steel V‑shaped chamber, support frame, and discharge valve assembly.

VANGUARD PHARMACEUTICAL OSG‑400 Oscillating Granulator USED 0

VANGUARD PHARMACEUTICAL OSG‑400 Oscillating Granulator USED

$7,500.00

Availability:

1 in stock

SKU: IGAM2880008

This listing is for a USED Vanguard OSG‑400 Oscillating Granulator. Designed for pharmaceutical and industrial material processing, this unit converts wet or dry powders into uniform granules through an oscillating rotor mechanism. The OSG‑400 is part of a granulation system typically used in tablet production, food processing, chemical handling, and material size‑reduction workflows. The nameplate indicates 480V, 3‑phase power and a 2011 manufacture date. This machine includes a stainless‑steel processing chamber and front control interface.

EBBCO PMF‑24,000‑IL In‑Line Chiller w/ PMF‑MWF3‑623 Filter Vessel - USED 0

EBBCO PMF‑24,000‑IL In‑Line Chiller w/ PMF‑MWF3‑623 Filter Vessel – USED

$4,500.00

Availability:

1 in stock

SKU: igam3350001

This listing is for a USED Ebbco PMF‑24,000‑IL In‑Line Chiller paired with an Ebbco PMF‑MWF3‑623 Metalworking Filter Vessel. The chiller operates on 460V/3PH power and includes a 3 HP compressor using R407C refrigerant. The filter vessel is rated for a maximum operating pressure of 60 PSI and accepts PMF‑623 series filter cartridges. This system is designed for industrial coolant management, metalworking fluid temperature control, and in‑line filtration to maintain consistent process quality.

REXROTH HCS03.1E‑W0100‑A‑05‑NNBN IndraDrive C Servo Drive USED 0

REXROTH HCS03.1E‑W0100‑A‑05‑NNBN IndraDrive C Servo Drive USED

$6,000.00

Availability:

1 in stock

SKU: IGAM0210056

This listing is for a USED Rexroth HCS03.1E‑W0100‑A‑05‑NNBN IndraDrive C servo drive. It is designed for controlling servo motors in industrial automation systems. This unit is categorized as a servo drive controller and includes capabilities such as 3‑phase 400–500V input, 3‑phase 0–480V output, DC 24V control power supply, and current ratings of 80A and 73A depending on operational mode.

AIS Tool Tracker System USED 0

AIS Tool Tracker System USED

$6,000.00

Availability:

1 in stock

SKU: IGAM3230001

This listing is for a USED AIS Tool Tracker System, originally designed for industrial assembly and tool management applications. This system includes 5 cameras, 4 ESTIC impact guns, 8 ESTIC rechargeable batteries, 1 ESTIC Handy 2000 cordless controller, 1 Dynics screen, and a main panel. It is categorized as an automated tool tracking and control system, featuring integrated vision tracking, torque monitoring, and centralized control for assembly operations.

Note: This product ships from Tilbury ON, Canada. Additional fees may apply for international delivery. Please contact for more details.

REXROTH WSC60-HR571-I6300-DMA34-01003-737X R987385326 WELDING CONTROL USED 0

REXROTH WSC60-HR571-I6300-DMA34-01003-737X R987385326 WELDING CONTROL USED

$4,500.00

Availability:

4 in stock

SKU: IGAM0220094

The REXROTH WSC60-HR571-I6300-DMA34-01003-737X R987385326 Welding Control is a used advanced welding controller designed for precise process regulation in industrial resistance and robotic welding applications. Built by Bosch Rexroth, this unit is engineered to provide real-time weld management, parameter monitoring, and integration with complex automation systems. Its modular configuration and high-end control features make it an ideal choice for manufacturers looking to maintain or upgrade existing welding infrastructure with OEM-grade components.

SPIRATION ROTO-FINISH ST-25SRM USED 0

SPIRATION ROTO-FINISH ST-25SRM USED

$4,500.00

Availability:

1 in stock

SKU: IGAM0630007

The ROTO-FINISH ST-25SRM Vibratory Finishing Machine is a used mass finishing system designed for deburring, polishing, and surface conditioning of metal and plastic components. Known for its rugged build and reliable performance, the ST-25SRM is a tub-style machine ideal for processing medium-to-large parts or delicate components requiring separation. This model provides consistent, uniform surface finishes and is widely used in aerospace, automotive, and general manufacturing. The unit is in good condition, making it a cost-effective solution for production or maintenance finishing needs.

REXROTH WSC60-SR571-I6300-0MA34-01003-737X W/ PSI6000 WELDING CONTROLLER USED 0

REXROTH WSC60-SR571-I6300-0MA34-01003-737X W/ PSI6000 WELDING CONTROLLER USED

$4,500.00

Availability:

16 in stock

SKU: IGAM0220091

The REXROTH WSC60-SR571-I6300-0MA34-01003-737X with PSI6000 Welding Controller is a used advanced welding control system designed for high-precision, automated resistance welding applications. Developed by Bosch Rexroth, this integrated solution offers real-time weld process management, adaptive control features, and seamless communication with industrial automation networks. Paired with the PSI6000 interface, it delivers enhanced programmability and monitoring functions, making it ideal for demanding manufacturing environments such as automotive assembly lines, appliance production, and industrial fabrication.

CENTERLINE CFSPIN-020-040-127 Pinch-Type Weld Gun USED - Tested 0

CENTERLINE CFSPIN-020-040-127 Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060282

CENTERLINE Pinch-Type Weld Gun USED - Tested 0

CENTERLINE Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060285

CENTERLINE CFSPIN-020-040-117 Pinch-Type Weld Gun USED - Tested 0

CENTERLINE CFSPIN-020-040-117 Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060289

CENTERLINE CRSPIE-220-06508 Pinch-Type Weld Gun USED - Tested 0

CENTERLINE CRSPIE-220-06508 Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060290

CENTERLINE CFSPIN-020-040-115 Pinch-Type Weld Gun USED - Tested 0

CENTERLINE CFSPIN-020-040-115 Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060293

*Water & Weld Tested*
Fittings and Hoses have been replaced

CENTERLINE Model CFSPIN-020-040-115 used weld guns available. Ideal for precision welding tasks, this unit offers reliability and performance. Perfect for enhancing your manufacturing efficiency. Explore this cost-effective solution today!

CENTERLINE CFSPIN-020-040-117 Pinch-Type Weld Gun USED - Tested 0

CENTERLINE CFSPIN-020-040-117 Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060297

CENTERLINE CRSPIE-220-06514 Pinch-Type Weld Gun USED - Tested 0

CENTERLINE CRSPIE-220-06514 Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060300

MILCO 665-16001-58 Pinch-Type Weld Gun USED - Tested 0

MILCO 665-16001-58 Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060275

*Water & Weld Tested*
Hoses and fitting have been replaced

MILCO Weld Gun Model 665-16001-58 available, used condition. Ideal for industrial applications, this reliable tool enhances your welding operations with proven performance. Don’t miss the opportunity to own quality equipment from a trusted manufacturer.

MILCO 665-16001-58 Pinch-Type Weld Gun USED - Tested 0

MILCO 665-16001-58 Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060276

MILCO 665-16005-12 Pinch-Type Weld Gun USED - Tested 0

MILCO 665-16005-12 Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060278

MILCO 665-16001-66 Scissor-Type Weld Gun USED - Tested 0

MILCO 665-16001-66 Scissor-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060279

MILCO 665-16005-12 Pinch-Type Weld Gun USED - Tested 0

MILCO 665-16005-12 Pinch-Type Weld Gun USED – Tested

$4,500.00

Availability:

1 in stock

SKU: IGAM1060280