All Products - Page 57 of 439 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Sort By:

EMERSON DXA‑430 PCM‑1 Brushless Servo Drive USED 0

EMERSON DXA‑430 PCM‑1 Brushless Servo Drive USED

$975.00

Availability:

1 in stock

SKU: IGAM3780072

This listing is for a USED Emerson brushless servo drive, model DXA‑430, part of the PCM‑1 positioning drive system. This unit is designed to control brushless servo motors in industrial motion and positioning applications. PCM‑1 drives are commonly used in automation systems requiring precise speed, torque, and position control and are intended for integration into industrial control panels and machine systems.

SEW‑EURODRIVE MDV60A0220‑503‑4‑0T MOVIDRIVE Servo Drive USED 0

SEW‑EURODRIVE MDV60A0220‑503‑4‑0T MOVIDRIVE Servo Drive USED

$975.00

Availability:

3 in stock

SKU: IGAM2840280

This listing is for a USED SEW‑EURODRIVE MOVIDRIVE servo drive, model MDV60A0220‑503‑4‑0T. It is a modular frequency inverter designed for precise control of AC servo motors and asynchronous motors in industrial automation systems. MOVIDRIVE MDV60A drives are commonly used in conveyors, material handling equipment, robotics, and automated machinery where reliable motion control and flexible integration are required.

SEW‑EURODRIVE K77DV112M4 Gearmotor 6.75:1 12,736 lb‑in Torque NEW 0

SEW‑EURODRIVE K77DV112M4 Gearmotor 6.75:1 12,736 lb‑in Torque NEW

$975.00

Availability:

1 in stock

SKU: IGAM2840028

This listing is for a NEW SEW‑EURODRIVE K77DV112M4BMGBHRTFAV1HIS gearmotor assembly. The unit consists of a SEW K‑Series right‑angle gear reducer paired with a three‑phase AC motor and integrated brake. It also has a 6.75:1 reduction ratio, approximately 30 RPM output speed, and rated torque of 12,736 lb‑in, making this unit suitable for high‑torque industrial drive applications.

SEW‑EURODRIVE K77DV112M4 Gearmotor - NEW 0

SEW‑EURODRIVE K77DV112M4 Gearmotor – NEW

$975.00

Availability:

1 in stock

SKU: IGAM2840029

This listing is for a NEW SEW‑EURODRIVE K77DV112M4BMGBHRTFAV1HIS gearmotor assembly. The unit consists of a SEW K‑Series right‑angle gear reducer paired with a three‑phase AC motor and integrated brake. It also has a 6.75:1 reduction ratio, approximately 30 RPM output speed, and rated torque of 12,736 lb‑in, making this unit suitable for high‑torque industrial drive applications. The gearmotor has never been installed or placed into service and retains original factory nameplates.

CLECO MPRO200GC-AP CELLCORE CONTROLLER USED 0

CLECO MPRO200GC-AP CELLCORE CONTROLLER USED

Availability:

3 in stock

SKU: IGAM2740041

This listing is for a used Cleco MPRO200GC-AP CellCore controller. This industrial controller is designed to manage and control Cleco electric and cordless fastening systems within automated or semi-automated assembly environments.

See photos for details.

Part No: MPRO200GC-AP
Type: CellCore Controller
Condition: USED

Manufacturer: Cleco (Apex Tool Group)
Country of Manufacture: Germany
UL Listing: cULus Listed Industrial Control Equipment

WTC 964-2200 Gen 6 Weld Controller NEW 0

WTC 964-2200 Gen 6 Weld Controller NEW

Availability:

4 in stock

SKU: IGAM1980565

This listing is for a NEW WTC 964-2200. It is designed for managing weld control operations in automated systems. This unit is categorized as a weld control module and includes the following capabilities: inverter-based regulation, compact form factor, and compatibility with MFDC welding systems.

BRANICK AH/RI/R Air Powered Tire Spreader USED 0

BRANICK AH/RI/R Air Powered Tire Spreader USED

Availability:

1 in stock

SKU: IGAM2920008

This listing is for a USED BRANICK AH/RI/R. It is designed for tire servicing and spreading operations. This unit is categorized as a tire spreader and includes the following capabilities: manual or pneumatic operation, compatible with passenger and light truck tires, durable steel frame construction.

Key features include reversible powered tire rotation, letting you rotate the tire in either direction at the push of a pedal, and all-steel construction that ensures durability and long service life in high-volume shops. The roll-on setup means tires can be loaded easily and quickly, saving time and reducing strain.

With an integrated high-intensity LED light, visibility inside the tire casing is dramatically improved for inspection and repair. Whether you’re working with low-profile passenger tires or larger truck applications, the AH/RI/R gives you the power, precision, and reliability you need.

Specifications:

Tire Compatibility: Passenger and Truck tires

Power Type: Air-powered (no electricity required)

Tire Rotation: Reversible, powered rotation (foot pedal-controlled)

Lighting: Built-in LED inspection light

Construction: Heavy-duty all-steel frame

Platform Height: 30 inches (ergonomic working height)

Maximum Tire Width: Up to 13.5 inches

Maximum Tire Diameter: Up to 47 inches

Air Pressure Requirement: 100–125 PSI

Weight Capacity: 250 lbs

Country of Origin: Made in the USA

ROTO-FINISH ST-4N6A VIBRATORY PARTS FINISHER USED 0

ROTO-FINISH ST-4N6A VIBRATORY PARTS FINISHER USED

Availability:

1 in stock

SKU: IGAM1790024

MILLER CP-302 MIG WELDERWITH 60 SERIES 24V WIRE FEEDER USED 0

MILLER CP-302 MIG WELDERWITH 60 SERIES 24V WIRE FEEDER USED

Availability:

1 in stock

SKU: IGAM1670012

The Miller CP-302 MIG Welder with 60 Series 24V Wire Feeder is a used industrial-grade welder/cutter designed for high-efficiency, high-amperage welding tasks. Delivering 300.0 amps of output power at 100% duty cycle, this machine is built to handle continuous, heavy-duty MIG and flux-cored welding. The included Miller 60 Series 24V wire feeder enhances wire control for smooth, precise welds, making this system a reliable choice for demanding fabrication environments.

MILLER - AUTO-AXCESS 300 Welder USED 0

MILLER – AUTO-AXCESS 300 Welder USED

Availability:

1 in stock

SKU: IGAM0030296

The MILLER Auto-Axcess 300 is a used multi-process inverter welder built for automated and semi-automated welding applications. Engineered with Miller’s advanced digital controls, this 300-amp power source delivers precision arc performance, excellent weld consistency, and seamless integration with robotic systems. Designed for flexibility, it supports MIG, Pulsed MIG, and Flux-Cored welding, making it an ideal solution for manufacturing environments requiring reliable, high-quality welding with minimal downtime.

MILLER AUTO AXCESS MODEL 450 DI USED WORKING WELDERS 0

MILLER AUTO AXCESS MODEL 450 DI USED WORKING WELDERS

Availability:

1 in stock

SKU: IGAM0030045

The MILLER Auto-Axcess 450 DI is a used industrial-grade welder engineered for advanced welding automation and high-demand production environments. With up to 450 amps of welding power, this inverter-based unit is part of Miller’s Auto-Axcess line, offering precise digital control, integration capabilities for robotic systems, and multi-process flexibility. Ideal for manufacturers requiring high throughput and consistent weld quality, the 450 DI is built to deliver exceptional performance in both semi-automated and fully automated applications.

EATON 2500A POW-R-WAY III Copper Expansion Joint 480V, 3PH, 3G NEW 0

EATON 2500A POW-R-WAY III Copper Expansion Joint 480V, 3PH, 3G NEW

Availability:

2 in stock

SKU: IGAM0031053

The Eaton 2500A Pow-R-Way III Copper Expansion Joint is a new high-capacity component engineered for integration into 480V, 3-phase, 3-ground (3PH, 3G) electrical busway systems. Designed as part of the Pow-R-Way III series, this copper expansion joint plays a critical role in maintaining reliable connectivity between busway segments by accommodating thermal expansion, structural shifts, and dynamic mechanical loads. Crafted from high-conductivity copper and rated for continuous high-current operation, this expansion joint is ideal for demanding industrial and commercial power distribution environments.

SIEMENS 1FK7032-2AK71-1CH1 SIMOTICS S Servo Motor w/ WITTENSTEIN SK+075S-MF2-100 USED 0

SIEMENS 1FK7032-2AK71-1CH1 SIMOTICS S Servo Motor w/ WITTENSTEIN SK+075S-MF2-100 USED

$950.00

Availability:

1 in stock

SKU: IGAM4160026

This listing is for a USED Siemens 1FK7032-2AK71-1CH1 servo motor with an attached Wittenstein alpha SK+075S-MF2-100 right-angle planetary gearbox. The assembly provides precision rotary motion and torque transmission for positioning, indexing, and motion control applications. The combination of a SIMOTICS S servo motor and Wittenstein gearbox is commonly integrated into CNC machinery, robotics, automated production equipment, and material handling systems requiring controlled speed and torque output.

ALLEN BRADLEY 281E-F12S-10B-RRG ArmorStart Safety Combination Starter NEW 0

ALLEN BRADLEY 281E-F12S-10B-RRG ArmorStart Safety Combination Starter NEW

$950.00

Availability:

7 in stock

SKU: IGAM3220038

This listing is for a NEW Allen-Bradley ArmorStart Safety Control Module (281E-F12S-10B-RRG) with Ethernet Base (280E-FNS-10-RG). It is designed for decentralized motor control in industrial automation systems, providing integrated safety functionality and EtherNet/IP connectivity. This unit is categorized as a motor control and safety module and includes the following capabilities: 24V DC control voltage, current range 0.5–2.5A, IP67 enclosure rating, and TUV-assessed Category 4 PL e safety compliance.

Radicon A061028CWHCBF1 Series A Gear Reducer USED 0

Radicon A061028CWHCBF1 Series A Gear Reducer USED

$950.00

Availability:

1 in stock

SKU: IGAM3580241

This listing is for a USED Radicon A061028CWHCBF1 industrial gear reducer. It is designed for torque reduction and speed control in industrial power transmission applications. This unit is part of the Radicon Series A gearbox family and features a high reduction ratio of 1000:1 with a rated output speed of approximately 0.63 RPM, as indicated on the manufacturer nameplate. The gearbox is supplied filled with synthetic lubricant (Shell Omala / Synduro SHB 320 equivalent) and is suitable for continuous‑duty industrial environments.

BOSCH AVENTICS R481631243 Rodless Cylinder RTC‑DA‑032‑0394‑HD‑M NEW 0

BOSCH AVENTICS R481631243 Rodless Cylinder RTC‑DA‑032‑0394‑HD‑M NEW

$950.00

Availability:

2 in stock

SKU: IGAM3580224

This listing is for a NEW Bosch AVENTICS R481631243 rodless pneumatic cylinder. It is designed for precise linear motion in industrial automation and material handling systems. This unit is categorized as a rodless pneumatic linear actuator and is part of the AVENTICS Series RTC, Heavy Duty configuration, featuring a 32 mm bore, 394 mm stroke, double‑acting operation, and guided slide design for high load and torque applications.

Eaton 42C4744H06 Enclosure Panel Box 36W x 90H NEW 0

Eaton 42C4744H06 Enclosure Panel Box 36W x 90H NEW

$950.00

Availability:

1 in stock

SKU: IGAM3760025

This listing is for a NEW Eaton 42C4744H06. This enclosure panel box provides a protective housing format for electrical distribution or control components and supports panel-mounted integration within industrial or commercial electrical systems. The unit corresponds to a PRL4 series box configuration with approximate dimensions of 36 inch width and 90 inch height, suitable for large panel assemblies and equipment installations.

LAMBDA ZUP120‑3.6 Programmable Power Supply NEW 0

LAMBDA ZUP120‑3.6 Programmable Power Supply NEW

$950.00

Availability:

1 in stock

SKU: IGAM2840299

This listing is for a NEW Lambda ZUP120‑3.6 programmable DC power supply. It is designed for precision laboratory, test, and industrial applications requiring regulated DC output with programmable control. This unit is categorized as a programmable bench power supply and provides up to 120V DC output at 3.6A with constant voltage and constant current operation.

LAMBDA ZUP120‑3.6 Programmable Power Supply NEW 0

LAMBDA ZUP120‑3.6 Programmable Power Supply NEW

$950.00

Availability:

1 in stock

SKU: IGAM2840102

This listing is for a NEW Lambda ZUP120‑3.6 programmable DC power supply. It is part of the ZERO‑UP Series, designed for precision electronic testing, R&D benches, automated equipment, and controlled DC power delivery. This unit operates at 0–120V and up to 3.6A, offering adjustable voltage and current with digital front‑panel programming.

BALDOR 35E067T884G1 32HP 600RPM 3‑Phase Electric Motor NEW 0

BALDOR 35E067T884G1 32HP 600RPM 3‑Phase Electric Motor NEW

$950.00

Availability:

1 in stock

SKU: IGAM3280032

This listing is for a NEW Baldor 35E067T884G1 electric motor.
It is designed for industrial mechanical drive applications requiring low‑speed, high‑torque performance. This unit is a 3‑phase AC motor rated at 32 horsepower with a 600 RPM output speed and 230V input. It belongs to the 56Z frame class and provides reliable heavy-duty operation suitable for a wide range of manufacturing and mechanical systems.

HARDINGE SBA0000187 ERICKSON TOOL HOLDER ASSEMBLY NEW 1

HARDINGE SBA0000187 ERICKSON TOOL HOLDER ASSEMBLY NEW

$950.00

Availability:

1 in stock

SKU: IGAM1050330

This listing is for a NEW HARDINGE SBA0000187 Erickson-type tool holder assembly.

OEM double-angle collet holder for CNC turning centers and toolholding systems.
Precision ground and balanced for high-speed machining applications.

See photos for details.

Part No: SBA0000187
Type: Erickson-Type Tool Holder Assembly
Condition: NEW
Style: Double-angle collet holder
Material: Hardened alloy steel
Mounting: Tapered shank (CAT/BT style)
Accessories: Wrench not included

Please message us with any questions.

CHROMA 19035 EST SCANNER AC/DC/IR/DCR 8CH SAFETY TESTER USED 0

CHROMA 19035 EST SCANNER AC/DC/IR/DCR 8CH SAFETY TESTER USED

$950.00

Availability:

1 in stock

SKU: IGAM1700216

This listing is for a used Chroma 19035 Wound Component EST Scanner.
Device used for testing and scanning wound components for electrical characteristics.

Item is clean and was removed from a working system. See photos for details.

Part No: 19035
Type: EST Scanner
Condition: USED

Please message us with any questions.

LEUZE BPS 34 S M 100 Barcode Positioning Sensor NEW 0

LEUZE BPS 34 S M 100 Barcode Positioning Sensor NEW

$949.99

Availability:

41 in stock

SKU: IGAM1910174

This listing is for a new Leuze electronic BPS 34 S M 100 barcode positioning sensor, part number 50038007, supplied in its original factory‑sealed box. The BPS 34 series is designed for absolute position detection using barcode tape, commonly used in material handling, conveyor systems, automated storage, and intralogistics applications. This unit operates on 10–30 VDC, is CE certified, and was manufactured on May 8, 2019.

KUKA KPC ED05 133594 ROBOT CONTROLLER 24VDC USED 0

KUKA KPC ED05 133594 ROBOT CONTROLLER 24VDC USED

Availability:

5 in stock

SKU: IGAM0220138

This listing is for a USED KUKA KPC ED05 Robot Controller (133594).

Industrial PC-based controller used in KUKA KRC2ed05 robotic systems. Provides real-time motion control and system management for KUKA robots. Includes multiple I/O and communication ports for integration with automation environments.

See photos for details.

Part No: 133594
Type: Industrial Robot Controller
Condition: USED
Input Voltage: 24V DC
Multiple I/O Ports (Ethernet, USB, DVI, Serial)
Compatible with KUKA KRC2ed05
Please message us with any questions.

CM Rapid-Temp Series Box Furnace - USED 0

CM Rapid-Temp Series Box Furnace – USED

Availability:

1 in stock

SKU: IGAM2880025

This listing is for a USED CM Rapid Temp Furnace. CM Rapid Temp furnaces are designed for high‑temperature thermal processing, heating, and material testing applications. This unit includes an insulated heating chamber, electric heating elements, and a front‑loading stainless‑steel door assembly. It is suitable for laboratory, production, and heat‑treating environments that require elevated temperature performance.

OMRON F3SG-4RA2030-30 Light Curtain Set 2030mm NEW Open Box 0

OMRON F3SG-4RA2030-30 Light Curtain Set (2030mm) NEW NO BOX

Availability:

1 in stock

SKU: IGAM3000004

This listing is for a NEW Omron F3SG-4RA2030-30-D and F3SG-4RA2030-30-L Light Curtain Set. It is designed for machine safety applications, providing reliable presence detection and safeguarding for operators. This unit is categorized as a safety light curtain system and includes the following capabilities: 2030 mm sensing height, robust aluminum housing, and advanced muting and blanking functions.

Omron F3SG-4RA2030-30 Light Curtain Set 2030mm NEW NO BOX 0

Omron F3SG-4RA2030-30 Light Curtain Set (2030mm) NEW NO BOX

Availability:

1 in stock

SKU: IGAM3000009

This listing is for a NEW Omron F3SG-4RA2030-30-L and F3SG-4RA2030-30-D Light Curtain Set. It is designed for machine safety applications, providing reliable detection and protection in hazardous zones. This unit is categorized as a safety light curtain system and includes the following capabilities: 2030 mm sensing height, 30 mm resolution, and advanced muting and blanking functions.

ATLAS COPCO TC-4000-S-ES Tool Controller 400–480VAC 3PH NEW 0

ATLAS COPCO TC-4000-S-ES Tool Controller 400–480VAC 3PH NEW

$925.00

Availability:

1 in stock

SKU: IGAM2840382

SMC CNSF125-700-D Pneumatic Cylinder w/CNS125D-UA Lock USED 0

SMC CNSF125-700-D Pneumatic Cylinder w/CNS125D-UA Lock USED

$925.00

Availability:

1 in stock

SKU: IGAM3580025

This listing is for a USED SMC CNSF125-700-D pneumatic cylinder with integrated locking mechanism. It is designed for linear motion control applications requiring intermediate stops, emergency stops, and drop prevention in industrial automation and machinery. This unit is categorized as a locking pneumatic tie-rod cylinder and includes capabilities such as bidirectional rod locking, double-acting operation, and a compact lock unit suitable for space-constrained installations.

Baldor Reliance VEM3714T 10 HP 3 Phase AC Motor 1770 RPM 230/460V USED 0

Baldor Reliance VEM3714T 10 HP 3 Phase AC Motor 1770 RPM 230/460V USED

$925.00

Availability:

1 in stock

SKU: IGAM3470066

This listing is for a USED Baldor Reliance VEM3714T. It provides 10 horsepower output from a 3‑phase AC induction motor operating at approximately 1770 RPM, with dual-voltage capability at 230/460 VAC. This unit is part of the Baldor Super‑E motor line and supports continuous-duty operation with high-efficiency performance for industrial drive applications requiring consistent torque and speed.