All Products

New Arrival

View Details

KUKA KR 1000 1300 TITAN PA/FLR ROBOT W/ KR C4 CONTROLLER 1300KG 3202MM USED

$158,999.00

Availability:

1 in stock

SKU: IGAM1701014

This listing is for a USED KUKA KR 1000 1300 titan PA/FLR Industrial Robot System with KR C4 NA UL extd Controller.

Heavy-duty 6-axis palletizing robot designed for high-load industrial applications. Includes KR C4 controller, cables, and teach pendant.

See photos for details.

Part No: KR 1000 1300 titan PA/FLR
Type: 6-Axis Industrial Robot
Condition: USED
Payload: 1300 kg
Reach: 3202 mm
Controller: KR C4 NA UL extd
Protection: IP65/IP67
Repeatability: ±0.1 mm
Mounting: Floor

Please message us with any questions.

View Details

ABB PCS100 ESS 1000 kW Power Conversion System USED

$145,000.00

Availability:

1 in stock

SKU: IGAM2740144

This listing is for a USED ABB PCS100 ESS 1000 kW Power Conversion System. This industrial‑grade converter is designed for large‑scale energy storage applications requiring precise AC/DC power regulation and high‑efficiency bidirectional power flow. The unit is part of ABB’s PCS100 ESS platform and includes capabilities such as 1000 kW nominal output, 480 VAC 3‑phase input, 750 VDC nominal DC bus, and a NEMA 3R outdoor‑rated enclosure. Ideal for renewable energy systems, energy storage, microgrid support, and industrial power conditioning environments.

View Details

HEXAGON GLOBAL S GREEN 12.15.10 COORDINATE MEASURING MACHINE CMM SYSTEM USED

$130,000.00

Availability:

1 in stock

SKU: IGAM2740143

This listing is for a used 2021 Hexagon Global S Green 12.15.10.
This is a complete bridge-type coordinate measuring machine (CMM) system including control rack, Renishaw probing electronics, and workstation.

See photos for details.

Part No: Global S Green 12.15.10
Type: Bridge Coordinate Measuring Machine (CMM)
Condition: USED

Serial Number: 0521-6412 UA
Date of Construction: 04/2021
Controller P/N: 658002105/05
Control Circuit Voltage: 24VDC
Input Power: 120 VAC, 1PH+PE, 60 Hz
FLA: 5A
Largest Load: 5.7A
Fuse: 6.3A

Includes:

Hexagon HH-C-V2.1 control unit

Hexagon HP-LC-300

Renishaw PI200-3

Renishaw IS1-2 Interface Selector

Lenovo ThinkStation workstation

Granite table and bridge structure

Air dryer/filter assembly noted (see photos).

System was removed from service. Operational status not verified by seller.

View Details

EASOM Ferris Wheel Trunnion w/ 4 Overhead ArcMate 120iC Robots AS-IS

$105,000.00

Availability:

1 in stock

SKU: IGAM0030315

EASOM Trunnion with four overhead ArcMate 120iC robots available. Ideal for weld cell applications. Used condition. Manufacturer: EASOM. Model: Trunnion + ArcMate 120iC. Perfect for enhancing your production line. Act fast!

Trunnion Specs:
Servo Motor: FANUC aif 30/4000 @ 3000 RPM
Rated Current: 39 A
Peak Torque: 82 N-m
Rotation: 180°
Max WT of Part: 2000 Kg

The Trunnion is equipped with (4) Fanuc – ArcMate 120iC with weld package including R-30iA Controls and Lincoln Electric – PowerWave i400 Welders. This system is also complete with its original control panels making integration simple and easy as this system was fully functional before being acquired. **Unit is missing (1) Robot Controller and Welder

View Details

BUSBAR LASER WELD SYSTEM W/ COHERENT HIGHLIGHT FL2000; NEW

$149,950.00

Availability:

4 in stock

SKU: IGAM1700999

This listing is for a NEW Busbar Laser Weld System equipped with a Coherent HighLight FL2000 Fiber Laser source and multiple integrated subsystems. It is designed for automated laser welding, busbar joining, battery module assembly, and precision robotic material handling. This system includes a high‑power CW fiber laser, autonomous mobile robot, liquid cooling modules, industrial laser enclosures, fume extraction, and a battery pack testing/balancing station.

View Details

2017 WEISSER UNIVERTOR AS90/400L RT CNC LATHE

$99,999.00

Availability:

1 in stock

SKU: IGAM0860002

The 2017 WEISSER UNIVERTOR AS90/400L RT CNC Lathe is a used high-precision machine tool built for versatility and complex operations. Equipped with the powerful Siemens Sinumerik 840D Control, it ensures seamless programming and reliable machining across various workpieces. This CNC lathe includes live tooling capabilities, allowing for milling, drilling, and tapping operations in a single setup—ideal for reducing cycle times and boosting overall productivity. Designed for both medium and large production volumes, the AS90/400L RT combines rigid construction with cutting-edge automation features. Its reputation for precision and performance makes it a standout in automotive, aerospace, and general industrial manufacturing. Whether you’re upgrading your existing line or expanding production, the 2017 WEISSER UNIVERTOR AS90/400L RT CNC Lathe offers robust value in a compact footprint.

View Details

2017 DMG MORI NHX4000 GEN 2

$99,999.00

Availability:

1 in stock

SKU: IGAM0670007

The Used 2017 DMG MORI NHX4000 GEN 2 is a robust and precision-engineered horizontal machining center designed to deliver high productivity in a compact footprint. Renowned for its superior performance in multitasking applications, this second-generation model features advanced automation, thermal compensation, and high-speed spindle capabilities. Ideal for complex machining operations in a production setting, the NHX4000 GEN 2 combines DMG MORI’s industry-leading build quality with user-friendly controls and efficient chip management systems to ensure reliable operation and consistent output across a wide range of materials.

New Arrival

View Details

NHR 9300 High Voltage Battery Tester 100kW 15″ Touch Panel USED

$89,999.00

Availability:

2 in stock

SKU: IGAM1700046

This listing is for a USED NHR 9300 High Voltage Battery Tester with 15″ Display.

Modular, regenerative battery test system with dual voltage range (600V/1200V) and 100kW per cabinet.
Ideal for EV, aerospace, and energy storage testing.
Includes integrated 15″ touchscreen for control and monitoring.

See photos for details.

Part No: 9300 Series
Type: High Voltage Battery Test System
Condition: USED
Voltage Range: 0–600 VDC / 0–1200 VDC
Current Range: ±333 A / ±167 A
Power Output: 100 kW per cabinet (scalable to 2.4 MW)
Display: 15″ Touch Panel
Please message us with any questions.

New Arrival

View Details

NHR 9300 High Voltage Battery Tester 100kW 15″ Touch Panel (DAMAGED) USED

$85,000.00

Availability:

2 in stock

SKU: IGAM1700076

This listing is for a USED NHR 9300 High Voltage Battery Tester with 15″ Display (DAMAGED).

Modular, regenerative battery test system with dual voltage range (600V/1200V) and 100kW per cabinet.
Ideal for EV, aerospace, and energy storage testing.
Includes integrated 15″ touchscreen for control and monitoring.

See photos for details.

Part No: 9300 Series
Type: High Voltage Battery Test System
Condition: USED
Voltage Range: 0–600 VDC / 0–1200 VDC
Current Range: ±333 A / ±167 A
Power Output: 100 kW per cabinet (scalable to 2.4 MW)
Display: 15″ Touch Panel
Please message us with any questions.

View Details

2013 MORI SEIKI NHX4000

$79,999.00

Availability:

1 in stock

SKU: IGAM0670008

The 2013 MORI SEIKI NHX4000 is a used high-performance horizontal machining center engineered for precision and productivity in complex manufacturing environments. Known for its rigid construction and advanced control system, the NHX4000 delivers exceptional accuracy, speed, and reliability. With generous travel dimensions, a powerful 25 HP spindle motor, and a rapid 12,000 RPM spindle speed, this machine is built for high-efficiency metal cutting. Its 40-tool automatic tool changer and HSK-63 spindle taper support fast changeovers, making it an ideal choice for job shops, automotive, aerospace, and precision component production.

View Details

20 STAND X 1.5” DAHLSTROM MODEL 400-20OB ROLLFORMER 12” ROLLSPACE USED

$79,500.00

Availability:

1 in stock

SKU: IGAM3530006

View Details

2006 Promac Zephyr VTR1.2 5A CNC 5-Axis Vertical Machining Center

$79,500.00

Availability:

1 in stock

SKU: IGAM0470011

The 2006 Promac Zephyr VTR1.2 5-Axis Vertical Machining Center is a versatile, high-precision used CNC machine designed for complex part geometries and advanced contouring operations. Equipped with a high-speed 15,000 RPM spindle and HSK-63 tool interface, this model excels in high-speed machining applications across aerospace, automotive, and mold industries. Its ability to perform full 5-axis machining, including negative angle cuts, makes it an excellent solution for intricate and undercut part features. Ideal for manufacturers seeking flexibility and multi-surface precision in one setup.

View Details

GUDEL FANUC RTU Linear Transfer Unit USED

$75,000.00

Availability:

1 in stock

SKU: IGAM0210010

This listing is for a USED GUDEL linear transfer unit configured for FANUC RTU integration. The system consists of a GUDEL precision linear rail assembly with multiple carriage plates and an integrated cable carrier, designed to extend robot working range by providing an external linear axis. This type of system is commonly used as a robot track or transfer unit in industrial automation and robotic production cells.

Featured

View Details

KOMATSU 55′ EXTENDED TABLE TWISTER PLASMA CUTTER 10’X55′ – 2008

$70,000.00

Availability:

1 in stock

SKU: IGAM0620015

Used KOMATSU TFPV6084 Plasma Cutting Machine. Cut-Width 96″, Cut-Length 480″, Plasma Power 300, 1 Plasma Torch. Cutting Speed 200, Rapid Traverse Speed 1000. Ideal for precision tasks needing reliable performance.

This machine installed in December 2008 in Illinois is an extend length (55 ft.) Twister TFPV Bevel Cutting machine. Lengths of TFPV and TFPL Series machines can be extended in 1 meter increments up to 30 meters (about 100 feet). The TFPV machines are extended width so that the full 8 ft. width can be cut at the maximum bevel angle of 45 degrees. Because of the extended width and extra weight of the bevel cutting torch mount, the beam is fortified and extra support is added to maintain cutting accuracy.

Includes Donaldson Torit Dust Collector and consumables.

Located in Illinois

Featured

View Details

1996 GROVE RT865B 65 TON ROUGH TERRAIN MOBILE CRANE, LOW HOURS.

$70,000.00

Availability:

1 in stock

SKU: IGAM0620013

GROVE RT865B 65 Ton mobile crane available, 1996 model, in used condition. Perfect for lifting needs on various job sites. Grove is the world leader in mobile cranes. For nearly a century, Grove has delivered best-in-class performance and groundbreaking technology through its range of rough-terrain, all-terrain, truck-mounted, military, industrial and telescoping crawler cranes. Located offsite in Illinois. 682 Hours.

View Details

HYD-MECH V25APC AUTOMATIC VERTICAL TILT FRAME SAW

$69,500.00

Availability:

1 in stock

SKU: IGAM1840001

LOCATION: GRAND RAPIDS, MI
Specifications:
Capacity at 90 Degrees 25″ x 30.5″
Capacity at 45 Degrees 21″ x 25″
Capacity at 30 Degrees Right 14.5″ x 25″
Capacity at 30 Degrees Left 13.5″ x 25″
Bundling Clamp is Full Capacity at 90 Degrees
Cant Angle 5.6 Degrees
Blade Dimensions 1 1/5″ x .050 x 21′ 1/2″
Blade Speed 75-350 sf/min
Blade Guide Carbide Pads, Spring Loaded, Zero Clearance, with Positively Maintained Parallelism, Integrally Mounted Entry Rollers
Blade Drive Wheel Diameter 32″
Blade Idler Wheel Diameter 24″
Blade Drive 10 HP
Hydraulic System, 3 HP, 1000 PSI, 7 Gallon Tank
Coolant System Tank Capacity 38 US Gallons
Coolant System Usable Capacity 28 US Gallons
Hydraulic Vise Full Stroke
Vise Adjustable Force 1000 – 3300 lbs.
Table Height 44″
Maximum Workload 10,000 lbs.
Machine Weight 9,500 lbs,
Barfeed Weight 4,500 lbs.

Preliminary Specifications – Subject to Verification

View Details

2006 HAAS EC-1600-4X HORIZONTAL MACHINING CENTER USED

$67,000.00

Availability:

1 in stock

SKU: IGAM3510003

View Details

TONGTAI SH-4000P CNC HORIZONTAL MACHINING CENTER USED

$59,995.00

Availability:

1 in stock

SKU: IGAM0480063

This listing is for a Tongtai SH-4000P CNC Horizontal Machining Center.

Manufacturer: Tongtai
Model: SH-4000P
Year: 2017
Machine Type: Horizontal Machining Center

Capacity & Structure:
Pallet Size: 400 × 400 mm (Twin APC standard)
Maximum Workpiece Size: Ø550 × 800 mm
Maximum Loading Capacity: 400 kg

Travels:
X-Axis Travel: 510 mm
Y-Axis Travel: 510 mm
Z-Axis Travel: 510 mm

B-Axis:
Indexing Accuracy: 0.001° (4th Axis)

Spindle:
Spindle Speed: 15,000 RPM (Standard, Built-In)
Spindle Taper: 7/24 Taper No. 40
Spindle Power: Up to 37 kW (Approx. 35–49 HP)

Performance:
Rapid Traverse (X/Y/Z): 60 m/min

Tooling:
Tool Magazine Capacity: 60 Tools (ATC)
Tool Type: CAT 40 / BT 40

Location: OH

View Details

2006 Toyoda BM-1600 Vertical Machining Center

$59,995.00

Availability:

1 in stock

SKU: IGAM2990001

View Details

14 STAND X 2” TISHKEN MODEL #14-MW-2 ROLLFORMER 8″ ROLL SPACE USED

$59,500.00

Availability:

1 in stock

SKU: IGAM3530003

This listing is for a Tishken 14-MW-2 Roll former.

Manufacturer: Tishken
Model: 14MW-2
Serial: 11245-664
Number of stands: 14
Arbor diameter: 2″
Roll space: 8″
Center distance between stands: 12″
Center distance between arbors: 5-1/2″ to 7″
Base to bottom spindle center: 5″
Keyways width: .375″
Capacity (max thickness): .109″
Hand of line: Right to left
Coolant pump: Yes
Motor, horsepower: 20 HP

Location: OH

View Details

BLANCHARD 26 HAD-48 GRINDER

$59,500.00

Availability:

1 in stock

SKU: IGAM048017

The Blanchard 26 HAD-48 Grinder is a powerful, used rotary surface grinder built for heavy-duty, high-precision grinding tasks. Located in Michigan, this machine features a 48-inch magnetic chuck and a 100 HP vertical grinding spindle, making it ideal for large-part surfacing with tight tolerances. Known for its rugged build and rapid stock removal capability, the 26 HAD-48 is a dependable solution for shops focused on flatness, parallelism, and repeatability across ferrous and non-ferrous materials.

View Details

72″ WIDE OSCILLATING TO 35 DEGREE DIE SHEAR USED

$50,000.00

Availability:

1 in stock

SKU: IGAM1980818

View Details

PACIFIC 250 PF-OBS 250-Ton Hydraulic Press USED

$50,000.00

Availability:

1 in stock

SKU: IGAM2600010

This listing is for a USED Pacific 250 PF-OBS Hydraulic Press. It is designed for heavy-duty metal forming and punching operations in industrial environments. This unit is categorized as a 250-ton hydraulic press and includes a maximum capacity of 250 tons, punching capacity of 166 tons, and a hydraulic relief setting of 2350 PSI.

View Details

KUKA AGVs – SOLD IN LOTS OF 10 – MODEL KMP600 BATTERIES AND CHARGER INCLUDED

$50,000.00

Availability:

50 in stock

SKU: IGAM2960001

This listing is for USED KUKA KMP600 Swisslog CarryPicK AGVs sold in lots of 10 units. These autonomous mobile robots are designed for flexible material handling and intralogistics in industrial environments. Each unit includes integrated batteries and a compatible charging system. The KMP600 is categorized as an Automated Guided Vehicle (AGV) Type E and offers capabilities such as precision navigation, and payload handling up to 600 kg.

** NOTE: Units were meticulously maintained. Full maintenance records available upon request**
– New Batteries will be provided along with one charger for every order of 10 units.

View Details

TSUDAKOMA TWA160 HIGH SPEED TILTING ROTARY TABLE

$49,500.00

Availability:

1 in stock

SKU: IGAM0480016

The Tsudakoma TWA160 High-Speed Tilting Rotary Table is a precision-engineered, compact rotary solution designed for high-speed 4th and 5th-axis applications. This used unit, located in Michigan (MI), is ideal for enhancing multi-axis machining flexibility in vertical or horizontal machining centers. With its high-speed tilt capability and durable construction, the TWA160 enables manufacturers to achieve accurate, complex machining in a smaller footprint. Known for Tsudakoma’s reliable performance and build quality, the TWA160 is a smart addition for shops looking to increase productivity and part complexity without sacrificing accuracy.

New Arrival

View Details

KUKA KR 420 R3330/FLR w/ KRC4 Controls USED

$48,999.99

Availability:

1 in stock

SKU: IGAM1701003

View Details

2016 TAKUMI VC1052 VMC

$48,500.00

Availability:

1 in stock

SKU: IGAM2880002

View Details

2007 150-TON x 10′ STRIPPIT LVD TURBO HYDRAULIC PRESS BRAKE USED

$45,000.00

Availability:

1 in stock

SKU: IGAM2070006

View Details

MAKINO E33 GRAPHITE VERTICAL MACHINING CENTER

$45,000.00

Availability:

1 in stock

SKU: IGAM0360003

The Used 2005 Makino E33 Graphite Vertical Machining Center is a high-precision vertical mill specifically engineered for graphite machining applications, where dust control, fine surface finishes, and thermal stability are essential. Outfitted with the advanced Professional 5 Control (Fanuc 310is Model A) and key auxiliary systems like a BLUM laser tool measurement, Extor graphite dust collector, and Oilmatic spindle chiller, this machine is built to deliver reliable, efficient performance in demanding environments. With a high-speed 40,000 RPM spindle and a generous 30-tool automatic changer, the E33 is ideal for applications requiring speed, accuracy, and contamination-free conditions.

New Arrival

View Details

OMRON LD-90X SELF NAVIGATING AUTONOMOUS ROBOT NEW

$43,199.00

Availability:

20 in stock

SKU: IGAM1700022

The Omron LD-90x is an autonomous mobile robot (AMR) designed for material handling and transport in various environments, particularly those with confined spaces or dynamic settings. Listing is for the robot unit only, no other accessories or battery are included.

Key features and specifications

– Self-Navigation: The robot navigates autonomously using proprietary software and laser-based mapping, eliminating the need for magnets or beacons.
– Payload: It can carry payloads up to 90 kg. With the optional ROEQ TMC130 Cart System it can handle up to 130 kg.
– Speed: Maximum speed of 0.9 m/s.
– Safety: It incorporates safety features like onboard laser sensing, rear sonar, and a bumper to detect and avoid obstacles, ensuring safe operation alongside people. It complies with ISO EN1525, JIS D6802, and ANSI B56.5 safety standards.
– Ease of Use: The robot is designed for easy installation and minimal programming, integrating with
existing systems like MES, ERP, and WMS.

KUKA KR 1000 1300 TITAN PA/FLR ROBOT W/ KR C4 CONTROLLER 1300KG 3202MM USED

ABB PCS100 ESS 1000 kW Power Conversion System USED

HEXAGON GLOBAL S GREEN 12.15.10 COORDINATE MEASURING MACHINE CMM SYSTEM USED

EASOM Ferris Wheel Trunnion w/ 4 Overhead ArcMate 120iC Robots AS-IS

BUSBAR LASER WELD SYSTEM W/ COHERENT HIGHLIGHT FL2000; NEW

2017 WEISSER UNIVERTOR AS90/400L RT CNC LATHE

2017 DMG MORI NHX4000 GEN 2

NHR 9300 High Voltage Battery Tester 100kW 15″ Touch Panel USED

NHR 9300 High Voltage Battery Tester 100kW 15″ Touch Panel (DAMAGED) USED

2013 MORI SEIKI NHX4000

20 STAND X 1.5” DAHLSTROM MODEL 400-20OB ROLLFORMER 12” ROLLSPACE USED

2006 Promac Zephyr VTR1.2 5A CNC 5-Axis Vertical Machining Center

GUDEL FANUC RTU Linear Transfer Unit USED

KOMATSU 55′ EXTENDED TABLE TWISTER PLASMA CUTTER 10’X55′ – 2008

1996 GROVE RT865B 65 TON ROUGH TERRAIN MOBILE CRANE, LOW HOURS.

HYD-MECH V25APC AUTOMATIC VERTICAL TILT FRAME SAW

2006 HAAS EC-1600-4X HORIZONTAL MACHINING CENTER USED

TONGTAI SH-4000P CNC HORIZONTAL MACHINING CENTER USED

2006 Toyoda BM-1600 Vertical Machining Center

14 STAND X 2” TISHKEN MODEL #14-MW-2 ROLLFORMER 8″ ROLL SPACE USED

BLANCHARD 26 HAD-48 GRINDER

72″ WIDE OSCILLATING TO 35 DEGREE DIE SHEAR USED

PACIFIC 250 PF-OBS 250-Ton Hydraulic Press USED

KUKA AGVs – SOLD IN LOTS OF 10 – MODEL KMP600 BATTERIES AND CHARGER INCLUDED

TSUDAKOMA TWA160 HIGH SPEED TILTING ROTARY TABLE

KUKA KR 420 R3330/FLR w/ KRC4 Controls USED

2016 TAKUMI VC1052 VMC

2007 150-TON x 10′ STRIPPIT LVD TURBO HYDRAULIC PRESS BRAKE USED

MAKINO E33 GRAPHITE VERTICAL MACHINING CENTER

OMRON LD-90X SELF NAVIGATING AUTONOMOUS ROBOT NEW

Customer Support

About

More