New Arrival

SOLD!

Advanced Motion Controls 30A20ACV 30A Brush Type PWM Servo Amplifier USED

$175.00
Availability:

1 in stock

BRAND: A-M-C MODEL: 30A20ACV CONDITION: Used
SKU: IGAM4810073 Weight: 2 lbs Shipping Calculated at Checkout

1 in stock

Overview

This listing is for a USED Advanced Motion Controls 30A20ACV brush-type PWM servo amplifier. Based on the 30A20AC platform, the amplifier controls brushed DC servo motors using an analog command interface with current, voltage, IR compensation, and velocity operating modes. The standard platform is rated for 30–125 VAC input, up to 30 A peak output and 15 A continuous output, with regenerative four-quadrant operation and integrated protection functions.

Specification Table

IDENTIFICATION Manufacturer: Advanced Motion Controls Part Number: 30A20ACV Base Model: 30A20AC Revision: R01 Product Type: Brush Type PWM Servo Amplifier Condition: USED YOM: n/a Country of Manufacture: USA POWER AC Supply Voltage: 30-125 VAC Frequency: 50/60 Hz DC Supply Voltage: 40-190 VDC DC Bus Over-Voltage Limit: 195 VDC Maximum Peak Output Current: 30 A Maximum Continuous Output Current: 15 A Maximum Continuous Output Power: 2707 W Maximum Power Dissipation: 143 W Internal Bus Capacitance: 3600 µF SERVO CONTROL Motor Type: Brushed DC Servo Control Method: PWM Command Source: ±10 V Analog Operating Mode: Current Operating Mode: Voltage Operating Mode: IR Compensation Operating Mode: Velocity Primary I/O Logic Level: 5 V TTL Switching Frequency: 22 kHz FEEDBACK Position Feedback: ±10 VDC Tachometer Feedback: ±60 VDC Current Monitor Output: Included Current Reference Output: Included PROTECTION Over-Current Protection: Included Over-Temperature Protection: Included Over-Voltage Protection: Included Short-Circuit Protection: Phase-to-Phase / Phase-to-Ground Directional Inhibit Inputs: Included Bus Fuse: 16 A Shunt Fuse: 3 A SHUNT / REGENERATION Four-Quadrant Regenerative Operation: Yes Internal Shunt Regulator: Yes Internal Shunt Resistor: Yes Internal Shunt Resistance: 10 Ohm Shunt Resistor Power Rating: 50 W Shunt Regulator Turn-On Voltage: 185 VDC MOTOR LOAD Minimum Load Inductance: 250 µH Motor Output: Positive / Negative Motor Power Connection: 2-Contact Terminal Block ADJUSTMENT Loop Gain: Adjustable Current Limit: Adjustable Reference Gain: Adjustable Offset / Test: Adjustable Mode Selection: DIP Switch Current Scaling: Selectable Current Limit Ratio: Selectable SIGNAL INTERFACE Signal Connector: 16-Pin Connector Pitch: 2.54 mm Differential Reference Input: Included Inhibit Input: Included Positive Direction Inhibit: Included Negative Direction Inhibit: Included Fault Output: Included Low-Voltage Auxiliary Output: ±10 VDC / 3 mA POWER CONNECTION AC Power Connector: IEC 60320-C14 Protective Earth: PE Motor Connector: 2-Contact Terminal Block INSTALLATION Form Factor: Panel Mount ENVIRONMENTAL Heatsink Temperature Range: 0-65°C Storage Temperature Range: -40 to 85°C APPROVALS UL: Yes cUL: Yes UL Standard: UL 508C UL File Number: E140173 CE EMC: Yes CE LVD: Yes RoHS: Compliant

INDUSTRY EXPERTS

INDUSTRY EXPERTS

Decades of Equipment Knowlege.

Shipping

Shipping

Parcel Orders Shipped within 24 hrs. Monday thru Friday.

Customer Service

Customer Service

Local Customer Service Reps.