All Products - Page 35 of 438 - iGAM

(855) 678-4426

View All Results

View All Results

(855) 678-4426

View:

Sort By:

ATLAS COPCO ETD ST31-05-10-T25 Straight Tensor STR Nutrunner NEW NO BOX 0

ATLAS COPCO ETD ST31-05-10-T25 Straight Tensor STR Nutrunner NEW NO BOX

$2,200.00

Availability:

2 in stock

SKU: IGAM3580172

This listing is for a NEW Atlas Copco ETD ST31‑05‑10‑T25 electric torque tool. It is designed for controlled tightening applications in industrial assembly environments. This unit is categorized as an ETD‑series electric DC assembly tool and is intended for torque‑controlled fastening when paired with compatible Atlas Copco controllers. The tool features an inline ST‑series body, multi‑pin circular connector, and a precision output suitable for production fastening tasks.

Viking Pump KK4724R Internal Gear Pump 2" Industrial Pump NEW 0

VIKING PUMP KK4724R Internal Gear Pump NEW

$2,200.00

Availability:

1 in stock

SKU: IGAM3470057

This listing is for a NEW Viking Pump KK4724R. Internal gear pump configured to transfer viscous fluids using a rotary positive displacement mechanism, supporting steady flow handling in industrial lubrication, chemical, and process systems where consistent fluid movement and pressure stability are required.

Lincoln Electric Idealarc CV-300 Welder with LN-7 Wire Feeder USED 0

Lincoln Electric Idealarc CV-300 Welder with LN-7 Wire Feeder USED

$2,200.00

Availability:

1 in stock

SKU: IGAM4020010

This listing is for a USED Lincoln Electric Idealarc CV-300 paired with an LN-7 wire feeder. It delivers constant voltage DC welding output for MIG and flux-cored welding processes, with a 300 amp class power source and a remotely controlled wire feed system for consistent arc performance and industrial fabrication work.

JOHNSON CONTROLS NU‑NCM350‑708 Metasys Network Control Module USED 0

JOHNSON CONTROLS NU‑NCM350‑708 Metasys Network Control Module USED

$2,200.00

Availability:

3 in stock

SKU: IGAM2840123

This listing is for a USED Johnson Controls NU‑NCM350‑708 Metasys Network Control Module assembly. It is used as a supervisory network controller within Johnson Controls Metasys building automation systems. NCM350 controllers are commonly installed in commercial and industrial facilities to manage communication, coordination, and control of field controllers for HVAC, environmental control, and building management applications.

ELECTRO‑HEAT 40 kW 460V 3‑Phase Industrial Process Heater USED 0

ELECTRO‑HEAT 40 kW 460V 3‑Phase Industrial Process Heater USED

$2,200.00

Availability:

1 in stock

SKU: IGAM2840281

This listing is for a USED Electro‑Heat industrial electric heater, P/N 1307164, rated at 40 kW and designed for process heating applications in industrial environments. The unit operates on 460 VAC, three‑phase power, features a flanged immersion‑style heating element, and is suitable for air, gas, or liquid heating systems depending on application design. The heater shows cosmetic wear consistent with industrial use and was removed from service.

CINCINNATI 2437 Toolmaster Vertical Milling Machine 2HP 220/440V 3PH USED 0

CINCINNATI 2437 Toolmaster Vertical Milling Machine 2HP 220/440V 3PH USED

$2,195.00

Availability:

1 in stock

SKU: IGAM4030003

This listing is for a USED CINCINNATI 2437 Toolmaster vertical milling machine. This machine performs milling, drilling, and machining operations using a vertical spindle and manually controlled knee-and-table assembly. Key capabilities include a 2 horsepower spindle drive, 208–220/440V three phase electrical operation, and reinforced cast construction designed for toolroom and production machining.

BANNER SLLCP23-1050-S Light Curtain Set 1050mm 23mm NEW 0

BANNER SLLCP23-1050-S Light Curtain Set 1050mm 23mm NEW

$2,175.00

Availability:

3 in stock

SKU: IGAM3220216

CONTROL TECHNIQUES M000-094-02000-DUO Unidrive M700 90/110kW USED 0

CONTROL TECHNIQUES M000-094-02000-DUO Unidrive M700 90/110kW USED

Availability:

1 in stock

SKU: IGAM1700093

This listing is for a USED Control Techniques Unidrive M700, part number M000-094-02000-DUO. It is designed for high-performance motor control in industrial automation applications. This unit is categorized as an AC variable frequency drive and includes a power rating of 90/110kW, input voltage range of 485–743V, and output voltage range of 0–480V at 0–550Hz.

Brembo 1N1.9069A2K Front Gran Turismo (GT) Big Brake Kit NEW 0

Brembo 1N1.9069A2K Front Gran Turismo (GT) Drilled Big Brake Kit NEW

Availability:

2 in stock

SKU: IGAM2740187

This listing is for a NEW Brembo 1N1.9069A2K Front Gran Turismo (GT) Big Brake Kit. This high‑performance braking upgrade is engineered for improved stopping power, heat management, and fade resistance. The kit includes 6‑piston cast‑monobloc front caliper, 380mm two‑piece drilled rotor, and all required hardware for installation. Designed for select BMW X3 and X4 applications, this GT kit delivers track‑inspired braking performance for demanding driving conditions.

ALLEN‑BRADLEY 20BD8P0A3AYYADA0 PowerFlex 700 AC Drive NEW 0

ALLEN‑BRADLEY 20BD8P0A3AYYADA0 PowerFlex 700 AC Drive NEW

Availability:

11 in stock

SKU: IGAM1980696

This listing is for a NEW Allen‑Bradley 20BD8P0A3AYYADA0 PowerFlex 700 AC drive. This unit is designed to control three‑phase AC motors by providing adjustable speed and torque through variable frequency operation. It is commonly applied in industrial automation systems where precise motor control, energy efficiency, and reliable performance are required.

REXROTH MSK060B-0600-NN-M2-UG0-RNNN SERVO MOTOR NEW NO BOX 0

REXROTH MSK060B-0600-NN-M2-UG0-RNNN SERVO MOTOR NEW NO BOX

Availability:

2 in stock

SKU: IGAM0450166

The Rexroth MSK060B-0600-NN-M2-UG0-RNNN Servo Motor is a new high-performance servo motor, delivered without its original box. Designed by Bosch Rexroth, this model is part of the IndraDyn S series, known for its compact form factor and powerful torque output. It is ideal for precision automation tasks across a variety of industrial applications including robotics, CNC machinery, and packaging equipment. This motor supports dynamic acceleration and accurate positioning, making it suitable for use in demanding motion control environments.

FANUC SPINDLE MOTOR A06B-2408-B100 NEW IN BOX 0

FANUC SPINDLE MOTOR A06B-2408-B100 NEW IN BOX

Availability:

3 in stock

SKU: IGAM0860017

The FANUC A06B-2408-B100 Spindle Motor is a high-performance, industrial-grade AC spindle motor designed for precision machining applications. Built to deliver high-speed, reliable performance, this motor seamlessly integrates with FANUC CNC systems, ensuring optimal power, torque, and accuracy for demanding manufacturing environments. Its durable construction and advanced cooling system make it an ideal choice for milling, turning, and grinding applications.

AMTECH LC ADT‑4 Industrial Dust Collection System USED 0

AMTECH LC ADT‑4 Industrial Dust Collection System USED

Availability:

1 in stock

SKU: IGAM3810003

This listing is for a USED Amtech LC industrial dust collection system, model ADT‑4. This unit is designed for industrial particulate collection and air filtration in manufacturing environments. The ADT‑4 is a compact dust collector system incorporating a filter housing and material collection hopper, intended for centralized or point‑of‑use dust control applications commonly found in machining, fabrication, and production facilities.

MAGNESCALE SR67A‑064SADX Linear Scale NEW 0

MAGNESCALE SR67A‑064SADX Linear Scale NEW

$2,100.00

Availability:

1 in stock

SKU: IGAM3540260

This listing is for a NEW Magnescale linear scale, part number SR67A‑064SADX. This precision linear measurement device is designed for position feedback in CNC machines and industrial automation systems. The scale is supplied with the corresponding signal cable and mounting components and is suitable for high‑accuracy linear position measurement applications.

SEW‑EURODRIVE FA77BDT90L4 Gearmotor 2HP 166.47:1 Brake NEW 0

SEW‑EURODRIVE FA77BDT90L4 Gearmotor 2HP 166.47:1 Brake NEW

$2,100.00

Availability:

1 in stock

SKU: IGAM2840032

This listing is for a NEW SEW‑EURODRIVE gearmotor assembly FA77BDT90L4BMG2HRTHISU‑2WE. The unit consists of a SEW F‑Series helical‑bevel gear reducer paired with a DT90L4 three‑phase AC motor with integrated brake. It contains a 2 HP motor, 166.47:1 reduction ratio, and approximately 10 RPM output speed, making this unit suitable for high‑torque, low‑speed industrial applications. The gearmotor has never been installed or placed into service and retains original factory nameplates.

FISNAR F9600N F9000N Series Manipulator with Pendant and DC200 USED AS-IS 0

FISNAR F9600N F9000N Series Manipulator with Pendant and DC200 USED AS-IS

Availability:

1 in stock

SKU: IGAM2740107

This listing is for a USED Fisnar F9600N, part of the F9000N Series Manipulator. It is designed for automated fluid dispensing applications in industrial environments. This unit includes the manipulator, pendant, and Fisnar DC200 controller. It is categorized as a robotic gantry dispensing system and offers precision motion control for adhesive and fluid dispensing processes.

BYRNE COMPOSITE COIL SPRING FATIGUE TESTER USED 0

BYRNE COMPOSITE COIL SPRING FATIGUE TESTER USED

Availability:

1 in stock

SKU: IGAM2080011

This listing is for a USED Byrne composite coil spring fatigue tester. This industrial testing machine is designed to cyclically load coil springs for durability and fatigue testing applications. The unit includes a guarded test chamber, hydraulic power system, operator control panel, and integrated electrical control cabinets, making it suitable for industrial spring testing and quality control environments.

UNITED AIR SPECIALISTS - BDC-22 Dust Collector USED 0

UNITED AIR SPECIALISTS – BDC-22 Dust Collector USED

Availability:

1 in stock

SKU: IGAM0030302

The UNITED AIR SPECIALISTS BDC-22 Dust Collector is a used compact filtration unit designed to remove airborne dust, fumes, and fine particulate matter from industrial and commercial environments. Operating on 115V, 60Hz, single-phase power, the BDC-22 is ideal for smaller workspaces, laboratories, and equipment enclosures where point-source dust control is required. Built with durability and ease of maintenance in mind, this unit provides effective air filtration for improved workplace safety and cleanliness.

GRACO 25A600 Xtreme-Duty Agitator with Elevator for 55-Gallon Drum USED 0

GRACO 25A600 Xtreme-Duty Agitator with Elevator for 55-Gallon Drum USED

Availability:

2 in stock

SKU: IGAM1701034

This listing is for a USED GRACO 25A600.

Xtreme-Duty agitator with elevator, designed for mixing high-viscosity protective coatings in 55-gallon drums.
Equipped with high-torque blades and adjustable height for optimal material suspension.

See photos for details.

Part No: 25A600
Type: Xtreme-Duty Agitator with Elevator
Condition: USED
Mounting: Drum cover with elevator
Blade Type: High-torque, adjustable-height
Application: High-viscosity coatings in 200L drums
Please message us with any questions.

BAUER BG70Z‑11 Gearmotor 6.8 RPM 1.5 kW NEW 0

BAUER BG70Z‑11 Gearmotor 6.8 RPM 1.5 kW NEW

$2,095.00

Availability:

1 in stock

SKU: IGAM2840005

This is a new Bauer/Danfoss gearmotor, identified by type BG70Z‑11/D09SA4‑MESX010AXAM and motor number E25856600‑1. Bauer gearmotors are designed for heavy‑duty industrial power transmission applications, featuring a factory‑defined gear reduction and integrated three‑phase AC motor. This unit is rated for continuous duty operation. It has never been installed or placed into service.

HEALD WORCESTER 6 MASS Internal Surface Grinder USED 0

HEALD WORCESTER 6 MASS Internal Surface Grinder USED

Availability:

1 in stock

SKU: IGAM2510018

New Arrival

DOALL 2013-20 Vertical Contour Band Saw USED 0

DOALL 2013-20 Vertical Contour Band Saw USED

$2,000.00

Availability:

1 in stock

SKU: IGAM4190003

This listing is for a USED DoAll 2013-20 Vertical Contour Band Saw. The 2013-20 is a floor-standing metalworking machine used for contour cutting, profiling, trimming, and precision sawing operations. This machine incorporates variable band speed adjustment, an integrated DBW-15 blade welder, and a welded steel frame suitable for fabrication, toolroom, and production environments.

New Arrival

SHANKLIN F0392 Centerfolder USED 0

SHANKLIN F0392 Centerfolder USED

$2,000.00

Availability:

1 in stock

SKU: IGAM4140031

New Arrival

SHANKLIN F0392 Centerfolder USED 0

SHANKLIN F0392 Centerfolder USED

$2,000.00

Availability:

1 in stock

SKU: IGAM4140029

New Arrival

Shanklin C/Folder F3088 Centerfolder USED 0

Shanklin C/Folder F3088 Centerfolder USED

$2,000.00

Availability:

1 in stock

SKU: IGAM4140027

SHANKLIN T-62 Shrink Tunnel USED 0

SHANKLIN T-62 Shrink Tunnel USED

$2,000.00

Availability:

1 in stock

SKU: IGAM4140006

This listing is for a USED Shanklin T-62. This heat shrink tunnel is intended for shrink film packaging operations where controlled heat and conveyor transport are used to conform film around packaged products. The system integrates a conveyorized tunnel design with adjustable temperature control and conveyor speed settings for packaging and production environments.

GROB 4V-24 Vertical Bandsaw USED 0

GROB 4V-24 Vertical Bandsaw USED

$2,000.00

Availability:

1 in stock

SKU: IGAM4380004

This listing is for a USED GROB 4V-24 Vertical Bandsaw. The 4V-24 is a floor-standing vertical contour saw designed for cutting metals, plastics, composites, wood, rubber, and other materials using continuous band saw blades. This machine features a large cast work table, integrated blade welder assembly, adjustable blade-speed system, blade guide assemblies, and enclosed cabinet construction for fabrication, maintenance, and production environments.

XP Power XTL30-4P2P1J-000061/4P4P-120014 3000W AC-DC Power Supply NEW 0

XP Power XTL30-4P2P1J-000061/4P4P-120014 3000W AC-DC Power Supply NEW

$2,000.00

Availability:

1 in stock

SKU: IGAM4180049

This listing is for a NEW XP Power XTL30-4P2P1J-000061/4P4P-120014. The unit is a configurable AC-DC power supply platform designed to deliver multiple regulated DC outputs from a three-phase AC input source. This configuration provides four 24V outputs and one 12V output within the XTL30 3000W power system architecture for industrial, test, automation, and OEM equipment applications.

Miller CP-300(S) Constant Potential DC Arc Welding Power Source With 22A Wire Feeder USED 0

Miller CP-300(S) Constant Potential DC Arc Welding Power Source With 22A Wire Feeder USED

$2,000.00

Availability:

1 in stock

SKU: IGAM4270011

This listing is for a USED Miller CP-300(S) welding power source paired with a Miller 22A wire feeder. The system provides constant-potential DC output for MIG and flux-cored arc welding processes, combining a high-capacity welding power source with a 24V wire feeding package for fabrication, manufacturing, and production welding environments.

ASAHI-SEIKI NCF-1 Wire Forming Machine with Hydraulic Unit USED 0

ASAHI-SEIKI NCF-1 Wire Forming Machine with Hydraulic Unit USED

$2,000.00

Availability:

1 in stock

SKU: IGAM4170006

This listing is for a USED ASAHI-SEIKI NCF-1. This machine provides cam-driven wire forming using coordinated tooling and feed systems, supporting continuous production of shaped wire components. The setup includes a standalone hydraulic unit and auxiliary electrical components for integrated operation in industrial fabrication environments.