This listing is for a used Beckhoff CX2100-0004 power supply unit.

Designed to support CX2020/CX203x embedded PC systems, this DIN-rail power module accepts 24 V DC input and provides 45 W output. Includes built-in 5 V/2 A bus supply, FSTN 2×16 display with menu navigation, and diagnostic LEDs (PWR, I/O RUN, I/O ERR). Passive cooling and wide -25 °C to +60 °C range.

Part No: CX2100‑0004
Input: 24 V DC (–15 %/+20 %)
Output: 45 W
Bus Supply: 5 V DC @ 2 A
Display: 2×16 FSTN with selector
Diagnostics LEDs: Yes
Housing: Fanless, IP20
Condition: USED

This listing is for a used Beckhoff CX2020-0121 embedded PC controller.

This fanless, DIN-rail mounted unit runs an Intel® Celeron® 827E CPU (1.4 GHz) with 2 GB DDR3 RAM (configurable to 4 GB). It boots from a CFast card (20–40 GB) and includes two gigabit Ethernet ports, four USB 2.0 ports, and DVI-I. Expandable via side modules for I/O, serial, or fieldbus. Originally shipped with Windows Embedded Compact or IoT and is TwinCAT-ready.

Part No: CX2020‑0121
CPU: Intel Celeron 827E @1.4 GHz
RAM: 2 GB DDR3 (expandable to 4 GB)
Storage: 20–40 GB CFast card (boot)
Interfaces: 2× Ethernet, 4× USB, DVI‑I, expansion slot
Mounting: DIN‑rail
Power: 24 V DC (requires CX2100 PSU)
Operating Temp: −25 °C to +60 °C
Condition: USED

Please review all photos and message with any questions.

This listing is for a used Beckhoff EL7201 EtherCAT servo terminal.

The EL7201 is a compact servo drive terminal for brushless DC motors with up to 2.8 A nominal current. Offers precise motion control for compact automation applications using EtherCAT.

Part No: EL7201
Type: EtherCAT Servo Drive Terminal
Output: 2.8 A nominal, 6.5 A peak
Motor Voltage: 8–48 VDC
Motor Type: BLDC with encoder/resolver
Mounting: DIN Rail
Condition: USED

This listing is for a used Beckhoff EL1008 EtherCAT digital input terminal.

The EL1008 provides 8 digital 24VDC inputs in a compact 12 mm housing. Ideal for use in EtherCAT-based distributed I/O systems. Terminal only.

Part No: EL1008
Type: Digital Input Terminal
Inputs: 8
Input Voltage: 24 VDC
Mounting: DIN Rail
Bus Interface: EtherCAT
Condition: USED

This listing is for a used Beckhoff EL9576 regenerative clamp terminal.

Used with Beckhoff drive terminals, the EL9576 safely dissipates brake energy up to 50 W continuously or 1 kW peak, ensuring stable system performance. Compatible with EtherCAT I/O systems.

Part No: EL9576
Type: Regenerative Clamp Terminal
Voltage: 50 VDC
Continuous Power: 50 W
Peak Power: 1 kW
Resistance: 50 Ohm
Mounting: DIN Rail
Condition: USED

This listing is for a USED BECKHOFF EL9010.

This is an E-Bus end terminal module used to terminate EtherCAT terminal blocks in Beckhoff I/O systems. It is a passive component with no electronics and mounts on a DIN rail.

See photos for details.

Part No: EL9010
Type: End Terminal Module
Condition: USED
Function: Terminates EtherCAT E-Bus
Mounting: DIN Rail
Width: 12 mm
Please message us with any questions.

Beckhoff KL2022 PLC/Machine Control unit, brand new condition. Ideal for seamless integration in automation projects. Reliable performance ensuring optimal control of machine processes.

New Beckhoff KL9100 Controller. Perfect solution for efficient automation needs. Reliable quality from a trusted manufacturer. Enhance your system today with this high-performance controller. Suitable for a range of applications.

Beckhoff KL1104 new PLCs/Machine Control unit available. Ideal for optimizing your automated systems with cutting-edge technology. Perfect choice for enhancing efficiency and productivity in your operations.

BECKHOFF EK 1 100 Ethernet switch available. This used unit from BECKHOFF offers reliable performance and connectivity. Ideal for networking needs. Contact for purchase details and ensure network efficiency with this solid choice.

BECKHOFF ZK4500-8022-0080042787 cables, new condition. Enhance your setup with high-quality, reliable cables from a trusted manufacturer. Ideal for various applications demanding durability and performance. Secure your equipment upgrade today.